Gear 'stuck' occasionally

[Quekahwhye]

Occasion my manual verna gear 'stuck' cannot shift gear but car still moving on that gear. Any bro or sis know what happen???????? THANKS.

[Ahgong]

Occasion my manual verna gear 'stuck' cannot shift gear but car still moving on that gear. Any bro or sis know what happen???????? THANKS.

 

gear box oil levels ok or not?

or your clutch got problem?

[Kb27]

Maybe common clutch problem, like master/slave cylinder leaking.

If you pump the clutch a few times and the gear can shift in, that's the leak.

[Earthboy]

sounds like clutch problem

[Spiderman302]

sounds like clutch problem

Its a ring prob at the gear stick. Need to replace.

[Watwheels]

It's the linkages that are worn out.

[Old-driver]

Its All of the Above

 

Go to a mechanic and have a check would be a better option

[Kenken]

Dear All,

What about auto gear no cutch. AT on n off. Down shift from 3 to 1, ear 1 to 2jjerk.any ideal. ATF n filter changed.

Thanks

[Ezfaun]

Dear All,

What about auto gear no cutch. AT on n off. Down shift from 3 to 1, ear 1 to 2jjerk.any ideal. ATF n filter changed.

Thanks

 

If your car is using a normal Planetary gearbox, something in your valve body has worn out. The valve body actuates the clutches in the gearbox and so, directly affects the shifting. The only other things that would affect your shifting would be the modulator, ecu or tcm. That's why autoboxes are so ex to repair. It's not just the gears. If the above goes kaput, It could affect other parts of your g'box and may ruin it completely. Same goes for the valve body in conjunction with several sensors in your car like the cam/crank position sensor, speed sensor, etc..

 

If it's CVT, it's basically the same but instead of using a normal valve body, it uses a complex pulley positioning system which is even more expensive to repair. Good luck

Edited May 6, 2014 by Ezfaun

[Kenken]

Thanks a lot Bro.

Just called mazda for next monday appt. To check what the damage.learn new things today. BTW, obd scan code but no faulty code. After erase every thing gone, some how come back again.

[Kenken]

Yesterday changed 6 nos solenoid sensor, hope it will solve the problem.