Jump to content

Blackvue users - please come in AGAIN 2


RadX
 Share

Recommended Posts

Help Help!!

 

Formatted my SD card last nite. When i insert the SD card in blackvue cam today, there is an error message, pls check the SD card.

 

Can anyone tell me what is wrong and what i can do to ratify this?

 

Thanks thanks!!!

 

After formatting, you still need to copy over the various folders (I presume you have saved the folders but you can delete away the old saved videos).

 

If you do not have the folders, you can re-instate them by using the Blackvue firmware update software. It will then create the folders for you.

↡ Advertisement
  • Praise 1
Link to post
Share on other sites

(edited)

That's great! So it seems the critical overheating issue has been resolved!

 

Thanks for the feedback Crystal n Fuelsaver.

 

DR400: It is not resolved for DR400 yet. Please avoid this.

 

DR380 I am not sure if I would say this has no overheating problems. From what i have seen in the forum, nobody has so far tested this with long term parking under the hot sun.

Edited by I_RIDE_DEEP
Link to post
Share on other sites

DR400: It is not resolved for DR400 yet. Please avoid this.

 

DR380 I am not sure if I would say this has no overheating problems. From what i have seen in the forum, nobody has so far tested this with long term parking under the hot sun.

 

DR 380 is still quite new. so not much review on it

Link to post
Share on other sites

Turbocharged

Did you use the sd formatter provided by Pittasoft?

 

Use option: full overwrite, size adjustment ON.

 

 

Yes Sir. That's what i did...

Link to post
Share on other sites

Turbocharged

After formatting, you still need to copy over the various folders (I presume you have saved the folders but you can delete away the old saved videos).

 

If you do not have the folders, you can re-instate them by using the Blackvue firmware update software. It will then create the folders for you.

 

 

Ok Bro, Will go back and try. Hope it is not too complicated.

Thanks.

Link to post
Share on other sites

Turbocharged

usually after format, i insert it into the BV and it will auto-download to the SD card automatically.

 

 

Doesnt work for me... Thanks..

Link to post
Share on other sites

DR400: It is not resolved for DR400 yet. Please avoid this.

 

DR380 I am not sure if I would say this has no overheating problems. From what i have seen in the forum, nobody has so far tested this with long term parking under the hot sun.

 

my car is parked 24hrs open car park , so no overheating at the moment

Link to post
Share on other sites

my car is parked 24hrs open car park , so no overheating at the moment

Wow, so far so good then. Mine from 9-6pm at Seah Im open carpark for almost 3 weeks, still good. :D

Link to post
Share on other sites

Neutral Newbie
(edited)

I use to leave it running without switching off, than after 3 weeks the lens gets foggy send it back and get a RMA set (recently)....now I install a switch and switches off parking mode at home carpark (MSCP) and work place (park inside warehouse). I uses parking mode only on some places like shopping mall etc.....so far so good...touch wood...lol... But some how it makes me think this in-car camera is under utilize for what this BlackVue DR400 has design to be use... I also tried searching for other brand which I found most of the video quality are incomparable to DR400....If there is no issue with heating, this BV would be perfect....still waiting to find a perfect one :)

Edited by Jeff13
Link to post
Share on other sites

Neutral Newbie

Hi all,

Plan on getting 2 of the Blackvues, when they finally sort all this out.

Anyway, just got an email from a Blackvue exec from the UK.

I requested info on the Mark 11 . He states that all the 400G's

are essentially 400G-HD 11's, because they have replaced the old

PCB with a new one addressing the heat problem...We shall see?

Link to post
Share on other sites

Hi all,

Plan on getting 2 of the Blackvues, when they finally sort all this out.

Anyway, just got an email from a Blackvue exec from the UK.

I requested info on the Mark 11 . He states that all the 400G's

are essentially 400G-HD 11's, because they have replaced the old

PCB with a new one addressing the heat problem...We shall see?

 

Got bluff bluff or not! BV exec from the UK?

BV is from SKorea leh. [:/]

 

Link to post
Share on other sites

my car is parked 24hrs open car park , so no overheating at the moment

 

Yeah..I also parked "open air " at home and office. So far no "floggy" len as mentioned by few users.

The only issue i have is that when I unplug power to take out SD Card for viewing and re-insert again some times the date/time is not sync with the current date/time!

Some times sync with date/time if not it will continues recording with the "old time/date"!

Any ideas how to reset date/time? :blink:

Link to post
Share on other sites

That's great! So it seems the critical overheating issue has been resolved!

 

Thanks for the feedback Crystal n Fuelsaver.

let's just say the heat range is somewat between dr350 and dr400; slightly lower than dr400.

 

again, it's been about a couple weeks i'm on it 24/7 and still working.

↡ Advertisement
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...