Adrianli Hypersonic March 5, 2021 Share March 5, 2021 3 hours ago, yishunite said: Any ideas where to get O-ring washer? Preferably hardware store where I can see it in person. Inner diam 60mm outer diam 75mm I google and found this : http://yongleng.sg/all-portfolio-list/o-ring/ ↡ Advertisement 1 Link to post Share on other sites More sharing options...
Volvobrick Supersonic March 7, 2021 Share March 7, 2021 On 3/5/2021 at 1:26 PM, yishunite said: Any ideas where to get O-ring washer? Preferably hardware store where I can see it in person. Inner diam 60mm outer diam 75mm Shopee. Link to post Share on other sites More sharing options...
therock Supersonic May 12, 2021 Share May 12, 2021 SOS! My wall faucet - attached to the wall on one end and my washing machine on the other. The "switch" to close the faucet is faulty.. so it can't close properly and so it's leaking ++ Does anyone know someone who can come change it today or tomorrow? Thanks! 1 Link to post Share on other sites More sharing options...
Adrianli Hypersonic May 13, 2021 Share May 13, 2021 On 5/12/2021 at 6:45 PM, therock said: SOS! My wall faucet - attached to the wall on one end and my washing machine on the other. The "switch" to close the faucet is faulty.. so it can't close properly and so it's leaking ++ Does anyone know someone who can come change it today or tomorrow? Thanks! Just turn off at the main water meter and go hardware shop buy a new tap. Unscrew to the old one and replace with the new one. Take a photo of the old tap and show it to the hardware store ppl. Very easy job. 1 Link to post Share on other sites More sharing options...
D3badge 6th Gear May 13, 2021 Share May 13, 2021 1 hour ago, Adrianli said: Just turn off at the main water meter and go hardware shop buy a new tap. Unscrew to the old one and replace with the new one. Take a photo of the old tap and show it to the hardware store ppl. Very easy job. you forgot to tell him need to white tape to tap the new tap to prevent leakage 2 Link to post Share on other sites More sharing options...
Volvobrick Supersonic May 13, 2021 Share May 13, 2021 On 5/12/2021 at 6:45 PM, therock said: SOS! My wall faucet - attached to the wall on one end and my washing machine on the other. The "switch" to close the faucet is faulty.. so it can't close properly and so it's leaking ++ Does anyone know someone who can come change it today or tomorrow? Thanks! I think the "switch" is called valve..... 😅 Link to post Share on other sites More sharing options...
Ct3833 Supersonic May 13, 2021 Share May 13, 2021 2 hours ago, Adrianli said: Just turn off at the main water meter and go hardware shop buy a new tap. Unscrew to the old one and replace with the new one. Take a photo of the old tap and show it to the hardware store ppl. Very easy job. If there is false ceiling, usually there is an intermediate vavle above the false ceiling , no need to off the main. This type of thing better learn to do it ourselves, the labor cost is expensive due to our cost of living. Link to post Share on other sites More sharing options...
therock Supersonic May 14, 2021 Share May 14, 2021 Thanks bros, you need some skill and this isn't my forte. I found a handyman to help. My friend dropped by to arrest the leak for now, until the handyman comes next week to change the faucet. He will bring this for me.. The blue part was loose and too much play. So it could not tighten and leaked.. 3 Link to post Share on other sites More sharing options...
Adrianli Hypersonic May 14, 2021 Share May 14, 2021 Since you bought the part liao, just turn the whole thing anticlockwise to remove it. Use lots of white tape on the screw threads. Should have no leak. 1 Link to post Share on other sites More sharing options...
therock Supersonic May 14, 2021 Share May 14, 2021 2 hours ago, Adrianli said: Since you bought the part liao, just turn the whole thing anticlockwise to remove it. Use lots of white tape on the screw threads. Should have no leak. That's the theory... I stick to what I'm good at la.. Anyway if anyone is looking for sanitary and toilet stuff, there's a sale on this couple of days: 2 Link to post Share on other sites More sharing options...
therock Supersonic May 15, 2021 Share May 15, 2021 I learnt from the plumber, you'll need Teflon tape and you'll need to round about 30 rounds for a good seal. But leave a bit of the end sticking out to twist into the wall pipe opening.. Link to post Share on other sites More sharing options...
Ct3833 Supersonic August 1, 2021 Share August 1, 2021 (edited) share my DIY plumbing experience here. bought this hansgrohe sink mixer to replace my existing one, make use of weekend to have it replaced. but upon removal of the fitting, realised the hot water valve is damage, I have to open the false ceiling to turn off the heater valve instead. And make another trip to HQ shop to buy a straight valve. next, the bloody hansgrohe hose is not of common dimension, the hose diameters do not fit onto the straight valves. Have to run to HW shop to buy this step down fitting. finally the mixer is up. Damage is about $270. Now i am a happy man. Edited August 1, 2021 by Ct3833 8 Link to post Share on other sites More sharing options...
therock Supersonic August 1, 2021 Share August 1, 2021 Pro level bro! Next time I hire you la.. I understand that the German brands use a different calibre of pipes .. 1 Link to post Share on other sites More sharing options...
Volvobrick Supersonic August 1, 2021 Share August 1, 2021 First time I see an alarm clock in the toilet..... But great job! Next get rid of the mold in the corner with bleach or Mr Muscle. 1 Link to post Share on other sites More sharing options...
therock Supersonic August 1, 2021 Share August 1, 2021 1 minute ago, Volvobrick said: First time I see an alarm clock in the toilet..... But great job! Next get rid of the mold in the corner with bleach or Mr Muscle. I have a clock everywhere too haha.. one in each toilet... and a small radio too.. Link to post Share on other sites More sharing options...
Ct3833 Supersonic August 1, 2021 Share August 1, 2021 (edited) 9 minutes ago, therock said: Pro level bro! Next time I hire you la.. I understand that the German brands use a different calibre of pipes .. Anytime if I can be of value add, after the cover period. Not pro but can get simple things done myself. Edited August 1, 2021 by Ct3833 Link to post Share on other sites More sharing options...
mersaylee Supersonic August 1, 2021 Share August 1, 2021 7 minutes ago, therock said: Pro level bro! Next time I hire you la.. I understand that the German brands use a different calibre of pipes .. A regimental disciplined guy must be...brush teeth pangsai pangjio got strict regime one 😁 1 Link to post Share on other sites More sharing options...
Kb27 Supersonic August 1, 2021 Share August 1, 2021 My guess is that it's a 3/8". American piping are mostly 3/8" as well, while we usually use 1/2". thus the adaptor is needed. ↡ Advertisement 2 Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In NowRelated Discussions
Related Discussions
Plumber Recommendations please!
Plumber Recommendations please!
HELP! Need a reliable plumber & electrician
HELP! Need a reliable plumber & electrician
Woman paid $2500 for water heater, PUB investigating
Woman paid $2500 for water heater, PUB investigating
PlumbingHub Plumbers - Since 1984
PlumbingHub Plumbers - Since 1984
Help! I Need A Plumber !
Help! I Need A Plumber !
Plumber to recommend
Plumber to recommend