Jump to content

Car Plate replacement


Lucky888
 Share

Recommended Posts

My car plate (front and back) is a bit old and cracks can be seem on the letters.

 

I am thinking of replacing both the front and back car plate.

 

Any shops to recommend?

 

Also any particular designs to recommend and how much will it cost approximately?

↡ Advertisement
Link to post
Share on other sites

There is a shop at Ubi, cross juction at Traffic police HQ,1st shop, price is good. If it is not crowded, you can collect on the same day depend on the type of plate you do. If i remember correctly, those black base metal plate cost around $25ea.

  • Praise 1
Link to post
Share on other sites

Go here:

 

Eng Bee Signcraft

1 Mactaggart Road
#01-02 S368089

Tel: 62993383

Fax: 62843353

 

 

If you go to those car accessories shop, high chance they will order from this shop.

 

You go there, save on the middleman and you get it fast. Those embossed metal plates you can get it in 15mins.

 

Should be $60 for a set of embossed metal plates with frame. Got a price list there.

 

Unfortunately they are probably closed for CNY so go there next week.

  • Praise 1
Link to post
Share on other sites

Supercharged

The one in Sin Ming estate is quite good. Had one done for my bike rack and it only cost $8. It's the 2nd one in the block after the block with the big kopitiam (opp where Tuffkote used to be).

Link to post
Share on other sites

Hi Joe,

 

is the price quoted for front and back? or just front?

 

 

There is a shop at Ubi, cross juction at Traffic police HQ,1st shop, price is good. If it is not crowded, you can collect on the same day depend on the type of plate you do. If i remember correctly, those black base metal plate cost around $25ea.

 


Hi FCW75

 

is the price quoted for front and back? or just front?

 

 

Go here:

 

Eng Bee Signcraft

1 Mactaggart Road
#01-02 S368089

Tel: 62993383

Fax: 62843353

 

 

If you go to those car accessories shop, high chance they will order from this shop.

 

You go there, save on the middleman and you get it fast. Those embossed metal plates you can get it in 15mins.

 

Should be $60 for a set of embossed metal plates with frame. Got a price list there.

 

Unfortunately they are probably closed for CNY so go there next week.

 

Link to post
Share on other sites

Hi Joe,

 

is the price quoted for front and back? or just front?

 

 

 

 

Hi FCW75

 

is the price quoted for front and back? or just front?

 

 

 

 

I mentioned a set.

Link to post
Share on other sites

Thanks for the info. Just in time i am looking for a car plate change.

 

Go here:

 

Eng Bee Signcraft

1 Mactaggart Road
#01-02 S368089

Tel: 62993383

Fax: 62843353

 

 

If you go to those car accessories shop, high chance they will order from this shop.

 

You go there, save on the middleman and you get it fast. Those embossed metal plates you can get it in 15mins.

 

Should be $60 for a set of embossed metal plates with frame. Got a price list there.

 

Unfortunately they are probably closed for CNY so go there next week.

 

Link to post
Share on other sites

Go here:

 

Eng Bee Signcraft

1 Mactaggart Road

#01-02 S368089

Tel: 62993383

Fax: 62843353

 

 

If you go to those car accessories shop, high chance they will order from this shop.

 

You go there, save on the middleman and you get it fast. Those embossed metal plates you can get it in 15mins.

 

Should be $60 for a set of embossed metal plates with frame. Got a price list there.

 

Unfortunately they are probably closed for CNY so go there next week.

wow, $60 with frame and ready in 15 min.

Thanks for the tip

Link to post
Share on other sites

Look for Jeff Chen in Facebook.

 

$20 Front and Back carplate.

At Queensway car mart.

His contract is 9729 2909.

 

Can call and check out the price.

 

Btw. Im not Jeff.

I brought from him once.

And just find that its cheap :)

Link to post
Share on other sites

Went there this morning.

Good and fast workmanship,

yes around 10-15min ready.

Can choose the frame/wording eg Borneo motors - similar to authorised distributor.

Surprised that they provide the screws too, and offer to install the new plate for me, told them no need.

 

Generally impressed.

 

Cons - have to look for parking.

 

Also saw the "paperlamp", lighted number plate - but was told not LTA approved.

 

 

Link to post
Share on other sites

Which shop you went to?

 

Went there this morning.

Good and fast workmanship,

yes around 10-15min ready.

Can choose the frame/wording eg Borneo motors - similar to authorised distributor.

Surprised that they provide the screws too, and offer to install the new plate for me, told them no need.

 

Generally impressed.

 

Cons - have to look for parking.

 

Also saw the "paperlamp", lighted number plate - but was told not LTA approved.

 

 

 

Link to post
Share on other sites

Turbocharged

There is a shop at Ubi, cross juction at Traffic police HQ,1st shop, price is good. If it is not crowded, you can collect on the same day depend on the type of plate you do. If i remember correctly, those black base metal plate cost around $25ea.

Went to this before, fast service.

Link to post
Share on other sites

Look for Jeff Chen in Facebook.

 

$20 Front and Back carplate.

At Queensway car mart.

His contract is 9729 2909.

 

Can call and check out the price.

 

Btw. Im not Jeff.

I brought from him once.

And just find that its cheap :)

Yes, I bought 2 sets from him too. His price is reasonable. He will check the correct car number before working on the plates. I was making 1 for myself and my brother BMW. he gave me the wrong last character. Jeff called me to informed me that there is no such number and I contacted my bro and find out he remember wrongly. Nice guy and very please with his service.

Link to post
Share on other sites

Hypersonic

Went there this morning.

Good and fast workmanship,

yes around 10-15min ready.

Can choose the frame/wording eg Borneo motors - similar to authorised distributor.

Surprised that they provide the screws too, and offer to install the new plate for me, told them no need.

 

Generally impressed.

 

Cons - have to look for parking.

 

Also saw the "paperlamp", lighted number plate - but was told not LTA approved.

 

 

Actually can just drive straight into their premises.

Link to post
Share on other sites

I called up and enquired. I was told $50 for plastic frame and $60 for metal frame. Also, have to come back after a few hours to have the plate installed. Not 15 minutes wait but few hours.

 

I wondered what is the difference between their $60 plates and the usual $20 plate?

 

Any ideas?

 

Go here:

 

Eng Bee Signcraft

1 Mactaggart Road
#01-02 S368089

Tel: 62993383

Fax: 62843353

 

 

If you go to those car accessories shop, high chance they will order from this shop.

 

You go there, save on the middleman and you get it fast. Those embossed metal plates you can get it in 15mins.

 

Should be $60 for a set of embossed metal plates with frame. Got a price list there.

 

Unfortunately they are probably closed for CNY so go there next week.

 

Link to post
Share on other sites

Hypersonic

I called up and enquired. I was told $50 for plastic frame and $60 for metal frame. Also, have to come back after a few hours to have the plate installed. Not 15 minutes wait but few hours.

 

I wondered what is the difference between their $60 plates and the usual $20 plate?

 

Any ideas?

 

 

From Jan till now, you still haven't replace yr plates?

 

Maybe you don't really need to....haha.

 

Anyway, they can get it done fast la. Just drive to their premises.

↡ Advertisement
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...