Jump to content

Mitsubishi Attrage.


Cheesey74
 Share

Message added by kobayashiGT

Participate and learn more about Mitsubishi Attrage here! 

 

Recommended Posts

On 8/23/2019 at 11:37 PM, punjigao said:

hi all new here can check whether attrage style 2019 has power door switch? cant seem to find the button

Hi. What is a "power door switch" ? 

Link to post
Share on other sites

On 8/19/2019 at 12:24 AM, bongo9000 said:

Jumping in with a new question here...anyone ever changed the stock headlights on their attrage? Wondering if it would be worth it...

the simple answer is no, it is never worth it.

only if you have money to waste and you feel like doing it, then just change to whatever appease you.

then again, whatever you change must be LTA compliant hor.

Link to post
Share on other sites

Going at 70 and put to b is asking for trouble. 

MCP how many floors only no need b lah. Just use brake lah. 

Spoil transmission very expensive. Worn out brake pads very cheap to change. 

:D

  • Praise 2
Link to post
Share on other sites

1 hour ago, DicksonLeeWangLong said:

hi its me again !

anyone encounter problem like breaks not sensitive and sometime it work good?

did check the pad etc all are fine ..  

 Nope. Brake works fine so far for about 9 months already. 

Link to post
Share on other sites

On 8/27/2019 at 4:03 PM, Firehorse said:

the simple answer is no, it is never worth it.

only if you have money to waste and you feel like doing it, then just change to whatever appease you.

then again, whatever you change must be LTA compliant hor.

tempted by all the white lights haha. thanks!

Link to post
Share on other sites

On 8/18/2019 at 4:03 PM, ferrytales said:

Instead of changing to B, why not just pull the handbrake and drift down?

Lol ... switch to 'B' (Gear 2) to initiate the drift, counter-steer & toe-heel till the bend is about to be negotiated, switch back to 'D' (Gear 3-5) and prepare to accelerate, straightening out of the current bend.

Using Attrage can also perform 'Initial D'  :D

Edited by Dadiao
  • Praise 1
Link to post
Share on other sites

Neutral Newbie

Hi Guys,

I am a two month old Attrage owner and will like to check:

1) The rear seats are not able to fold down to increase the boot space.

2) What is the tyre pressure because I see two sets of reading "2.4(35){240}" and "2.2(32){220}"

3) I believe the spare tyre pressure is "4.2(60){420}". Is it necessary to check the spare  tyre pressure as well?

Thanks.

Link to post
Share on other sites

Neutral Newbie

Hi I'm new joined, did anyone facing c-pillar or rear desk weird noise issue? It's happen intermittently, feel very disturbing for driving experience.

Link to post
Share on other sites

On 9/4/2019 at 11:00 AM, decarn said:

Hi Guys,

I am a two month old Attrage owner and will like to check:

1) The rear seats are not able to fold down to increase the boot space.

2) What is the tyre pressure because I see two sets of reading "2.4(35){240}" and "2.2(32){220}"

3) I believe the spare tyre pressure is "4.2(60){420}". Is it necessary to check the spare  tyre pressure as well?

Thanks.

Back seat cannot fold. You never check before buying? 

 

Those are the different units.

 

Dont knw about spare tire. By right must check every 2 weeks. By left up to you 

Link to post
Share on other sites

10 hours ago, SIM37 said:

Just collected mine yesterday (sent my swift in to scrap).

Still figuring out how to set the display to km/l for average tank.

Congrats! If I remember correctly, you press the spindle until you reach km/100km. Then press and hold until the configuration changes to km/l. 🙂

 

Link to post
Share on other sites

22 hours ago, superzhen said:

Back seat cannot fold. You never check before buying? 

 

Those are the different units.

 

Dont knw about spare tire. By right must check every 2 weeks. By left up to you 

For spare, I normally check every 1 to 2 months 🙂

Link to post
Share on other sites

18 hours ago, auto1701 said:

Congrats! If I remember correctly, you press the spindle until you reach km/100km. Then press and hold until the configuration changes to km/l. 🙂

 

Yup got it. But cannot set to read for entire tank full right? After 4h it'll reset 

Link to post
Share on other sites

6 hours ago, SIM37 said:

Yup got it. But cannot set to read for entire tank full right? After 4h it'll reset 

No. I think the meter track the journey FC, not the full tank FC.  I do reset the FC after I pumped my petrol though.

↡ Advertisement
Link to post
Share on other sites

Guest
This topic is now closed to further replies.
 Share

×
×
  • Create New...