Jump to content

Mitsubishi ASX


Agoodman
 Share

Recommended Posts

Hi just bought my ASX last month and estimated collection end may...would like to enquiry on the fuel consumption rate so far...? And may I know where can I get the boot tray...? Tks!

 

Getting about 9 - 10 km/L, mostly city driving, using Caltex 98.

Normally about 450 km to 500 km before refueling.

You can get 11 - 13 km/L if u drive on expressway more often.

Just enjoy the ride and don't worry too much about the FC!

 

You can buy the boot tray from taobao, aliexpress , ebay.

Got free boot mat, so did not buy the boot tray.

↡ Advertisement
Link to post
Share on other sites

Neutral Newbie

Getting about 9 - 10 km/L, mostly city driving, using Caltex 98.

Normally about 450 km to 500 km before refueling.

You can get 11 - 13 km/L if u drive on expressway more often.

Just enjoy the ride and don't worry too much about the FC!

 

You can buy the boot tray from taobao, aliexpress , ebay.

Got free boot mat, so did not buy the boot tray.

First thanks...

 

Any link that you can share?

 

Also look for visor and door sill plate too

Link to post
Share on other sites

Neutral Newbie

You can find most visor and scuff and sill on Taobao or EZbuy or SGShop. You can also join the FB Mitsubishi ASX Singapore, they post some link and poison there 

Link to post
Share on other sites

Neutral Newbie

Anyone know where to go to a reputable Mitsubishi workshop? somewhat a Specialist for ASX or Mitsubishi cars?

 

Saying this because previously I'm drove a boxer car and patronize a boxer workshop like BKS. They would actually help you to understand your car more and what to lookout for and solve problem that only through experience could tell.

 

[bounce2]

  • Praise 1
Link to post
Share on other sites

Neutral Newbie

Just check...can we change the halogen yellow tone light which come with it to white led type?

  • Praise 1
Link to post
Share on other sites

Neutral Newbie

Haven't secure COE after 4 bidding. They tell me unless huge drop in COE then can deliver to me. C&C Fulco screw up big time. I will never recommend to any of my friend to Fulco anymore. Suckz

  • Praise 1
Link to post
Share on other sites

Neutral Newbie
(edited)

Just check...can we change the halogen yellow tone light which come with it to white led type?

Yes you can, it won't void warranty but if too bright and glaring in some ways; TP or LTA will come down on you but very rarely since most cars are hid.

Haven't secure COE after 4 bidding. They tell me unless huge drop in COE then can deliver to me. C&C Fulco screw up big time. I will never recommend to any of my friend to Fulco anymore. Suckz

Mine; got it during the first bid. Rather strange to say a huge drop in COE with a diff of 4 points the other round. Edited by 1348612
Link to post
Share on other sites

Just check...can we change the halogen yellow tone light which come with it to white led type?

No, so long you dont mod to HID.  Those bulbs from Philips or Osram are OK.

  • Praise 1
Link to post
Share on other sites

Haven't secure COE after 4 bidding. They tell me unless huge drop in COE then can deliver to me. C&C Fulco screw up big time. I will never recommend to any of my friend to Fulco anymore. Suckz

Yes, i too will not recommend to Fulco.  I booked my last year at same Car Expo fair 2016 and this salesman closed my purchase within 5 min (I already decided before the fair) and gave me nothing as gifts.  He said that C&C already give discounts and his job is to fill the purchase forms.  Later from chat group i realised not true.  After I took delivery of my ride, realized that the rear logo MIVEC was missing and I called him.  He just said that C&C dont give any more.  after a day, he called and he used his special connection to get me one.  Ton of bull shits.

  • Praise 1
Link to post
Share on other sites

Anyone know where to go to a reputable Mitsubishi workshop? somewhat a Specialist for ASX or Mitsubishi cars?

 

Saying this because previously I'm drove a boxer car and patronize a boxer workshop like BKS. They would actually help you to understand your car more and what to lookout for and solve problem that only through experience could tell.

 

[bounce2]

 

If you bought a new Mitsubishi, better go back to C&C for repairs and maintenance as still under warranty.

Not sure why you would want to send to outside workshop.

Link to post
Share on other sites

Just check...can we change the halogen yellow tone light which come with it to white led type?

 

LED bulbs are not approved for use, if the car head light housing was not designed for LED bulbs.

It can cause glaring and dazzle other drivers.

And when you go for Vicom inspection, it might fail.

 

Have changed my headlight bulbs to Osram "Nightbreaker Plus" halogen bulbs.

It is brighter with longer throw and is LTA legal.

But the life span will not be as good as the original halogen bulbs.

You need to do your own research first.

Link to post
Share on other sites

Lawsteady, on 06 May 2017 - 2:50 PM, said:snapback.png

Haven't secure COE after 4 bidding. They tell me unless huge drop in COE then can deliver to me. C&C Fulco screw up big time. I will never recommend to any of my friend to Fulco anymore. Suckz

 

Mine; got it during the first bid. Rather strange to say a huge drop in COE with a diff of 4 points the other round.

 

C&C Fulco is super lousy for COE bidding, CMI.

Got my COE in 2016 only after four COE bids.

Really slow, my previous cars (Nissan) all secured COE on the first bid.

 

 

Link to post
Share on other sites

(edited)

 

Lawsteady, on 06 May 2017 - 2:50 PM, said:snapback.png

 

 

C&C Fulco is super lousy for COE bidding, CMI.

Got my COE in 2016 only after four COE bids.

Really slow, my previous cars (Nissan) all secured COE on the first bid.

 

 

You are comparing small fry with big fish. Of course cmi.

 

Fulco is just a subsidary of C&C, what we know is they hold many dealership of car brands, which brand is given priority we won't know or are they operating independantly on their own when it comes to coe? While TanChong focus only on the Nissan brand. It's not easy to make a comparison based on what they do.

Edited by Watwheels
Link to post
Share on other sites

You are comparing small fry with big fish. Of course cmi.

 

Fulco is just a subsidary of C&C, what we know is they hold many dealership of car brands, which brand is given priority we won't know or are they operating independantly on their own when it comes to coe? While TanChong focus only on the Nissan brand. It's not easy to make a comparison based on what they do.

 

Agree that C&C Fulco is a smaller set-up compared to Tan Chong.

 

But there is no point in speculating on the reasons for it. 

To the consumer, we do not really care about this, only want to get our COE.

 

C&C Fulco already lost "Lawsteady" as a customer, he already bought a Mazda instead of a Mitsubishi.

And some ASX owners here have managed to get their COE on the first bid.

That shows that C&C Fulco can do it if they want to.

Link to post
Share on other sites

Neutral Newbie

Thanks for all the advise...

 

Just got my ASX Coe bided with first attempt...still wondering how it really work...anw just want to check how long it takes in general to collect the car? I ask the sales and said end may. I'm ok but just want avoid SLP on car plate...hahah

Link to post
Share on other sites

Neutral Newbie

Hi guys, I'm sorry that I cannot share my experience on ASX drive here anymore. It great to read all the review from this link. Mazda told me they will secure the COE for me on 11/5/17, meaning 1st bidding of May. Will be collecting the car 1 week later.

 

I'm actually more interested a SUV then a MPV.

Good luck guys..

↡ Advertisement
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...