Jump to content

A New Chapter - Skoda Singapore


Carbon82
 Share

Recommended Posts

9 hours ago, Shouyi said:

@Soonkuay76 in your vrs, does the car remembers your drive mode selection?  Or it goes back to normal mode every time u restart the car? 

yes vrs model.

U need the ODB function to configure so that can stay on the mode u last set- which is irritating

↡ Advertisement
Link to post
Share on other sites

2 hours ago, Soonkuay76 said:

yes vrs model.

U need the ODB function to configure so that can stay on the mode u last set- which is irritating

Can meh? What is the coding?

Link to post
Share on other sites

18 minutes ago, badlammy said:

Haha...bro I meant the coding or adaptation to ensure last drive mode remains. Cuz my understanding is cannot be done.

Ohh i see haha my bad!

 

VCDS has limitations ay or unless someone has come out with a code for it

Link to post
Share on other sites

1 hour ago, Soonkuay76 said:

Ohh i see haha my bad!

 

VCDS has limitations ay or unless someone has come out with a code for it

Difference between OBDeleven and vcds shd be just interface, the codings shd be same. Found something below, will see if it exists and give it a try.

Gateway 19
Adaptation
Driving_Profile_Selection_Parameter
last one Counter_Master_Reset change active to not active

Link to post
Share on other sites

Neutral Newbie
13 minutes ago, badlammy said:

Difference between OBDeleven and vcds shd be just interface, the codings shd be same. Found something below, will see if it exists and give it a try.

Gateway 19
Adaptation
Driving_Profile_Selection_Parameter
last one Counter_Master_Reset change active to not active

Later I go back and try

Link to post
Share on other sites

Neutral Newbie
11 minutes ago, badlammy said:

I disclaim first...if your car bricked, not my fault ok. 🤣

haha don worry, still trying to find out the code for disable start stop

Link to post
Share on other sites

20 hours ago, badlammy said:

Difference between OBDeleven and vcds shd be just interface, the codings shd be same. Found something below, will see if it exists and give it a try.

Gateway 19
Adaptation
Driving_Profile_Selection_Parameter
last one Counter_Master_Reset change active to not active

I tried. Doesn't work.

Link to post
Share on other sites

On 3/26/2021 at 4:04 PM, badlammy said:

I disclaim first...if your car bricked, not my fault ok. 🤣

Have you config with vcds for VIM?

Link to post
Share on other sites

56 minutes ago, Sdf4786k said:

Have you config with vcds for VIM?

Nope. I think that requires VCP. Anw, dun want VIM to distract my driving.

Link to post
Share on other sites

On 3/21/2021 at 8:21 AM, Sdf4786k said:

1.0 engine not the smoothest.. I believe the previous batch of octavia also stop the 1.0 because it’s drive train can’t match the load .. same for the kona

No no, the 1.0 Octavia drives well. It’s stopped because of $10,000 VES banding which defeats the purpose. 🤷‍♂

  • Praise 3
Link to post
Share on other sites

On 3/21/2021 at 8:23 AM, Sdf4786k said:

That’s quite a waste .. as i shared.. should have removed the items we don’t use like the sunroof that does not open n give us stuff that matters like DCC 

Yeah understood, some people might prefer sunroof for the lifestyle more to the driver focused dcc. Adding both will be the best no? But that will send the cost high. Haha.. so eventually somebody will have to decide which one to add in. 😁

On 3/21/2021 at 11:21 AM, Sdf4786k said:

N rightfully should be the case where it’s smooth n not noticeable .. but what does owners say is more important 

Doesn’t feel it for mine, no feeling when deactivation kicks in. I don’t even know when it happens or not for my current ride. Haha! 

↡ Advertisement
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...