Jump to content
dcb

Electrician lobang?

Recommended Posts

Need to change some lighting stuffs for the house. Any good electrician to recommend?

↡ Advertisement
  • Praise 1

Share this post


Link to post
Share on other sites

I am not sure what is the market rate, I asked one that I found from Gumtree.

 

they came to take out the 3 old ceiling lights and install the new ones I bought. $40 each light for their service.

 

but I won't recommend the one I engaged [laugh] they are not that bad but probably 80% of my expectations [sweatdrop]

Edited by Jman888
  • Praise 1

Share this post


Link to post
Share on other sites

Wah $40 for each ceiling lights changed seems rather expensive. However good guideline bro @Jman888

I am not sure what is the market rate, I asked one that I found from Gumtree.

they came to take out the 3 old ceiling lights and install the new ones I bought. $40 each light for their service.

but I won't recommend the one I engaged [laugh] they are not that bad but probably 80% of my expectations [sweatdrop]

 

Share this post


Link to post
Share on other sites

Look for Ah Peng.

He works for an electrician wiring company. He did my lighting points wiring for my flat. They may provide bulb changing services. His mobile is :- ‭+65 9653 3308‬

  • Praise 2

Share this post


Link to post
Share on other sites

Will give Peng a call. Thanks. [thumbsup]

Look for Ah Peng.
He works for an electrician wiring company. He did my lighting points wiring for my flat. They may provide bulb changing services. His mobile is :- ‭+65 9653 3308‬

 

↡ Advertisement

Share this post


Link to post
Share on other sites

Yes, best to find all these workers that do freelance outside working hours. 

 

What exactly do you need to do ? 

  • Praise 1

Share this post


Link to post
Share on other sites

By right, you should engage one with licence. This is to ensure the installation is properly done for safety.

 

https://www.ema.gov.sg/Electricity_Search_for_Licensed_Workers.aspx

 

By left, simple work can engage someone who really have enough experience. use the correct cable size, connect properly with good insulation, protected with the right mccb rating, wiring done with good mechanical protection.

 

Do be careful. [;)]

  • Praise 2

Share this post


Link to post
Share on other sites

Change the existing T5 bulbs in my cove light to LED T5 bulbs.

What exactly do you need to do ? 

 

Share this post


Link to post
Share on other sites

Change the existing T5 bulbs in my cove light to LED T5 bulbs.

Let me know how much they charge you. Am also thinking to do the same. Also cove ceiling lights
  • Praise 2

Share this post


Link to post
Share on other sites

Change the existing T5 bulbs in my cove light to LED T5 bulbs.

 

Your home high ceiling? Need long ladder?

  • Praise 1

Share this post


Link to post
Share on other sites

Need to change some lighting stuffs for the house. Any good electrician to recommend?

Hi Bro,

 

You can give this guys a call for a Quote -->

 

Ahmad 96948309

 

Sam 83168324

 

Rex 86301299

 

Ricky 97369196

  • Praise 1

Share this post


Link to post
Share on other sites

Standard 5 room HDB flat

Your home high ceiling? Need long ladder?

Share this post


Link to post
Share on other sites

If its just swapping bulbs to LED. Should be easy. Cove lights u just pull out as it's just on a clip..

Share this post


Link to post
Share on other sites

If its just swapping bulbs to LED. Should be easy. Cove lights u just pull out as it's just on a clip..

I tried DIY, and some LED lights didn't light up. Also the terminal points are slightly different. So, for me getting an electrical expert to come in to take a look at my current setup will be the best option

Share this post


Link to post
Share on other sites

that was mine concern too, I bought some LED ceiling light from JB and thought of changing myself, open the cover and give up [laugh]

 

pay $40 each for them to dismantle and install with some drilling, etc. At least I dun get killed [sweatdrop][laugh]

Share this post


Link to post
Share on other sites

By right, you should engage one with licence. This is to ensure the installation is properly done for safety.

 

https://www.ema.gov.sg/Electricity_Search_for_Licensed_Workers.aspx

 

By left, simple work can engage someone who really have enough experience. use the correct cable size, connect properly with good insulation, protected with the right mccb rating, wiring done with good mechanical protection.

 

Do be careful. [;)]

Yeah, but it'll cost an arm and 2 legs!

 

Change the existing T5 bulbs in my cove light to LED T5 bulbs.

Should be plug and play. Look at yourT5 lamp fitting. If its 2 hole power socket, just get back 2 hole ones

 

If its just swapping bulbs to LED. Should be easy. Cove lights u just pull out as it's just on a clip..

LED T5 usually is whole fitting, not tube

 

that was mine concern too, I bought some LED ceiling light from JB and thought of changing myself, open the cover and give up [laugh]

 

pay $40 each for them to dismantle and install with some drilling, etc. At least I dun get killed [sweatdrop][laugh]

Actually is simple enough to DIY. Of cos I'm slightly exposed to the industry... Haha

Edited by Othello

Share this post


Link to post
Share on other sites

Yeah, but it'll cost an arm and 2 legs!

 

Simple wrong connection of the cables can cause danger when replacing blubs even with the light switch in off position. so it good to play it safe. 

  • Praise 1

Share this post


Link to post
Share on other sites

If it's fluorescent whether it's the round tube or the long tube the setup is different of that from the LED.  The fluorescent uses a ballast and starter while the LED uses a driver. So you need to remove the ballast and starter setup and replace it with a driver setup. Yeah. You will need someone qualified to do it if you dunno how.

 

If you are using the E127 lightbulb (screw type) it's quite straight forward and only requires a direct led bulb replacement.

Edited by Watwheels
↡ Advertisement
  • Praise 1

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×