Cleaning of oven glass door

[Ct3833]

the glass panel of my oven has been oily and dirty for a while but have no time to figure out how to clean it,  the glass panels in between is so inaccessible. i was thinking to buy a new one but after looking around, I realised that most of the glass panels of the ovens are of the same design. I decided to remove the whole door after quite a bit of procrastination. I am sharing the process of removing the door and the glass panels in case anyone is interested

 

First, locate a catch on the door hinge, lock it against the hook.

swing the door to about 30 degree, lift up the door, it will come out nicely. 

Since i removed the door, might as well remove the fan.

There are all in all three gass panels, all can be taken out with either removing the holding screws or catches, depending on the design. 

 

revers the process to put back everything. 

 

anyone is interested and wants to know more, can PM me , happy to share my experience, but you model may be differnt from mine, so there might be some difference, however, i notice the design are generally quite similar.  

Edited May 27, 2023 by Ct3833

[Kb27]

This one very good to clean oven

[Ingenius]

This is the last thing I will think of doing. 
😄

can ts show how to clean stand fan, since this is more pressing ? 

Edited May 27, 2023 by Ingenius

[Ct3833]

On 5/27/2023 at 2:21 PM, Ingenius said:

This is the last thing I will think of doing. 
😄

can ts show how to clean stand fan, since this is more pressing ? 

Yes, quite some effort. Sorry i have zero stand fan 😄😄

[Tianmo]

On 5/27/2023 at 2:32 PM, Ct3833 said:

Yes, quite some effort. Sorry i have zero stand fan 😄😄

Do I carry my oven in to you, or you make house call?

 

[Ingenius]

On 5/27/2023 at 2:32 PM, Ct3833 said:

Yes, quite some effort. Sorry i have zero stand fan 😄😄

That’s quite unusual I must say. 

[Ingenius]

On 5/27/2023 at 2:38 PM, Tianmo said:

Do I carry my oven in to you, or you make house call?

 

I am sure he will clean it for you if you really bring it over. Lol. 

[Tianmo]

On 5/27/2023 at 2:21 PM, Ingenius said:

This is the last thing I will think of doing. 
😄

can ts show how to clean stand fan, since this is more pressing ? 

Stand fan? As in a normal stand fan? Bro, there is only one clip to unclipped and one knot to unscrew. You sure you need demo?

 

[Ct3833]

On 5/27/2023 at 2:39 PM, Ingenius said:

That’s quite unusual I must say. 

I have a lot of ceiling fans though 😅😅

[Ct3833]

On 5/27/2023 at 2:40 PM, Tianmo said:

Stand fan? As in a normal stand fan? Bro, there is only one clip to unclipped and one knot to unscrew. You sure you need demo?

 

I think he is referring to tower fans. 😃😃 hope not bladeless fan hor , but maybe still can reach the blower at the base. 

Edited May 27, 2023 by Ct3833

[Ingenius]

On 5/27/2023 at 2:40 PM, Tianmo said:

Stand fan? As in a normal stand fan? Bro, there is only one clip to unclipped and one knot to unscrew. You sure you need demo?

 

Have to take out the blade and the front and back metal covers and wash ah. Not just wipe down. Then reassemble, then it becomes good as new with clean air.  Fans get very dirty over time. 

Edited May 27, 2023 by Ingenius

[Ct3833]

On 5/27/2023 at 2:39 PM, Ingenius said:

I am sure he will clean it for you if you really bring it over. Lol. 

No no , i will dismantle  it for him, he will do the cleaning himself, i can provide free detergent.  😁😁😁

[Lala81]

Very interesting. But I will just leave it dirty. Lol. 

[Mkl22]

Seems like I have a similar oven. EF. Cheap and good. 

[Mkl22]

On 5/27/2023 at 2:42 PM, Ingenius said:

Have to take out the blade and the front and back metal covers and wash ah. Not just wipe down. Then reassemble.  Fans get very dirty over time. 

So easy. Don’t even need any tools except your hands. 

[mersaylee]

I just cleaned 2 standing fans and 2 table fans today...i have in total 12 fans at home...not including those USB hand held personal fan...i tink those also have 4-5...😂

[Ct3833]

Since i have time on Saturday, might as well replace a wall socket as well, i can hear arcing when flipping the switch.

And my door bell button got ripped of by the gate, the cover cracked by my son. Bought a new one and have it replaced also, now i am a happy man😄😄

 

 

 

[Mkl22]

On 5/27/2023 at 4:38 PM, Ct3833 said:

Since i have time on Saturday, might as well replace a wall socket as well, i can hear arcing when flipping the switch.

And my door bell button got ripped of by the gate, the cover cracked by my son. Bought a new one and have it replaced also, now i am a happy man😄😄

 

 

 

Still need to scrape off the old silicon and redo. 😂
use dowsil 791 or 688! Weatherproof

Edited May 27, 2023 by Mkl22