Struct bars for conti cars

[Wccm]

anyone knows which shop carries struct bars for conti cars?

[King]

which car?

[Soya]

autovox is the place to go for conti performance parts but they r not cheap. btw, which conti u driving?

[Vtim]

what's your ride

[Phalanx]

Alamak, Wccm, if you are the same Wccm from Seat Forum, then you can ask us there also mah

 

Anyway if it is the car in my avatar, then can get from Vass Auto for Neuspeed bars or go and purchase OEM Audi TT Strut Bar....

[Mel4fun]

You may go to those common accessories shop.....

 

...... and ask politely

 

Maybe the folks will bring out a T304 bar, pull out a drill, punch a few holes in your ride and weld on the stainless steel bar .....and Wah lah ! You got your customised Strut Bar

 

Good luck in your search

Edited December 27, 2003 by Mel4fun

[Mel4fun]

Oh...BTW, if you are looking for a range of options in SG, you got the wrong ownership.

 

Time to switch .

[Vtim]

that's what Luckent did to his Megane Classic, he just get those hardware shop to customize one for his ride, costing less than $200

[Vtim]

147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147, 147,

[Mel4fun]

Buddy,

 

I think I can get an OEM at 2/3 of his price....

 

But if there's non in the market for the make, then LL have to go the customised way.

 

However, the safety aspect and the effectiveness of the component may be compromised if not fitted in the rightful manner.

 

Good to know that there are options out there.

 

Cheers,

 

Edited December 27, 2003 by Mel4fun

[Mel4fun]

Err....your number is not listed in tonight 4D result leh....

 

sianz 1/2

 

[Vtim]

If I remember, it's $150 to $170 for a customized job

[Vtim]

I know but I didn't buy mine, I bought S2P2's 156's number but I think 'jump' number sequence for Starter's prize

[Saaber]

should buy combi mah...

[Vtim]

ah yar! so many numbers to buy but not enough $$$ ley!

[Mel4fun]

If the MOMENT is right, 1 set of number is enough already

 

Nah.....have to wait for the next round

[Saaber]

I olso know....

[Vtim]

aiyoh! everyone also know lar!

 

yar! me also waiting for the next round