Ad information
Hertz Ultimate Promotion (Valid till 31st Aug 2016)
Get a Hertz HCP 4 for ONLY $416. Comes with a FREE Hertz DSK 165.3 (worth $262)
* All prices exclude installation, cable and wiring charges
* All prices excludes GST
* While Stocks Last!
Hertz HCP 4 - 4 Channel Amplifier
- Channel mode : 4 - 3 - 2
- Output Power (RMS) @ 14.4 VDC
4 Ch: 65 W x 4 (4 Ω)
4 Ch: 95 W x 4 (2 Ω)
3 Ch: 65 W x 2 (4 Ω) + 190 W x 1 (4 Ω)
3 Ch: 95 W x 2 (2 Ω) + 190 W x 1 (4 Ω)
2 Ch: 190 W x 2 (4 Ω) - Filters
Bypass Yes
Hi-Pass A/B: 80 Hz @ 12 dB/Oct.
Lo-Pass A/B: 50 ÷ 500 Hz @ 12 dB/Oct. - Distortion - THD (100Hz @ 4Ω) : 0.01%
- S/N Ratio (A weighted @ 1V) : 103 dB
- Damping factor (100Hz @ 4Ω) : 120
- Size W x D x H mm (in.) : 315 x 190 x 50 (12.40 x 7.48 x 1.97)
Hertz DSK 165.3 Dieci 2-way Component System
- Power Handling - Peak W 160
- Power Handling - Continuous W 80
- Impedance Ω 4
- Frequency response Hz 50 ÷ 23k
- Sensitivity dB SPL 93
- Woofer size mm (in.) 165 (6.5)
- Tweeter size mm (in.) 24 (0.9)
- Woofer magnet High density flux ferrite
- Tweeter magnet Neodymium
- Woofer cone Water-repellent pressed paper
- Tweeter dome PEI
- Crossover type Hi Pass
- Crossover cut off 3,5 kHz @ 12 dB Oct.
For any enquiries, you may still contact us at 9844 7828 via WhatsApp (Preferred) / SMS or Call!
Ad information
Hertz Ultimate Promotion (Valid till 31st Aug 2016)
Get a Hertz HCP 4 for ONLY $416. Comes with a FREE Hertz DSK 165.3 (worth $262)
* All prices exclude installation, cable and wiring charges
* All prices excludes GST
* While Stocks Last!
Hertz HCP 4 - 4 Channel Amplifier
- Channel mode : 4 - 3 - 2
- Output Power (RMS) @ 14.4 VDC
4 Ch: 65 W x 4 (4 Ω)
4 Ch: 95 W x 4 (2 Ω)
3 Ch: 65 W x 2 (4 Ω) + 190 W x 1 (4 Ω)
3 Ch: 95 W x 2 (2 Ω) + 190 W x 1 (4 Ω)
2 Ch: 190 W x 2 (4 Ω) - Filters
Bypass Yes
Hi-Pass A/B: 80 Hz @ 12 dB/Oct.
Lo-Pass A/B: 50 ÷ 500 Hz @ 12 dB/Oct. - Distortion - THD (100Hz @ 4Ω) : 0.01%
- S/N Ratio (A weighted @ 1V) : 103 dB
- Damping factor (100Hz @ 4Ω) : 120
- Size W x D x H mm (in.) : 315 x 190 x 50 (12.40 x 7.48 x 1.97)
Hertz DSK 165.3 Dieci 2-way Component System
- Power Handling - Peak W 160
- Power Handling - Continuous W 80
- Impedance Ω 4
- Frequency response Hz 50 ÷ 23k
- Sensitivity dB SPL 93
- Woofer size mm (in.) 165 (6.5)
- Tweeter size mm (in.) 24 (0.9)
- Woofer magnet High density flux ferrite
- Tweeter magnet Neodymium
- Woofer cone Water-repellent pressed paper
- Tweeter dome PEI
- Crossover type Hi Pass
- Crossover cut off 3,5 kHz @ 12 dB Oct.
Merchant information
50 Serangoon North Avenue 4 #01-27First Centre S(555856)
|
||
11am - 8pm (Mon - Sun & PHs) | ||
98447828 |
Features & specs
HCP 4 is an amplifier designed to reproduce any musical genres with four separate channels for multiple configurations. Pre-amplified (Pre-In) inputs and high-level (Speaker-In) inputs allow for connection with any head units. Built to work both in mono, as part of a three-channel system with sub and front, and in stereo for a powerful two-channel system, HCP 4 is a unique model in terms of versatility!
All the Hertz Compact Power amplifiers are assembled with high-quality components and feature a complete and by-passable crossover system. The dissipation system is optimized with the heat being transferred to the heat sink and then dissipated through the sides of the amplifier.
- Compact design built from an extruded aluminum heatsink with the top side ensuring effective transfer of the heat generated by the power electronic components.
- Special balanced input circuitry to reject electromagnetic disturbances pre sent on the Pre-amplified or Speaker level inputs.
- Input featuring both Speaker-In (OEM radio) and RCA-In (Aftermarket radio) inputs.
- Selectable ART, Automatic Remote Turn-On/Off function, automatically turns on and off the amplifier when the OEM radio turns on and off (available on Speaker-In only).
- Power supply stage featuring multiple winding transformer, Low-ESR 105°C capacitors, AB-Class 2 Ω stable.
- Pre-out, also available when using Speaker level inputs.
- Mono operation mode (selectable) to realize a sub + front three-channel system, or a powerful two-channel system.
- Bass Boost (50 Hz) selectable to 12 dB, to increase the subwoofer punch.
- Lo-Pass (50 Hz to 500 Hz) and Hi-Pass (80 Hz) 12 dB crossover filters. The Hi-Pass fixed frequency filter ensures optimal coupling with sub amplifier, also providing the ability to realize a front + rear or a sub + front system.
- Selectable full range power outputs.
Power Supply
- Power supply voltage / fuse: 11 ÷ 15 VDC / 2 x 20 A
- Idling current (power ON/OFF): 1 A / 0.04 mA
- Consumption @ 2 Ω, 14.4 VDC (Max Musical Power): 21 A
- Remote In: 7 ÷ 15 VDC - 1 mA
- ART: Automatic Remote Turn-On/Off with Speaker-In
Features
- Distorsion - THD (100 Hz @ 4Ω): 0.01 %
- Bandwidth: 10 ÷ 45K Hz
- S/N Ratio (A weighted @ 1 V): 103 dB
- Damping factor (100 Hz @ 4 Ω): 120
- Pre-In sensitivity: 0.6 ÷ 5 VRMS (15 k Ω)
- Speaker-In sensitivity: 1.5 ÷ 12 VRMS (47 Ω)
- Load impedance (MIN)
- @ 4 Ch: 2 Ω
- @ 3 Ch: 2 Ω + 2 Ω + 4 Ω
- @ 2 Ch: 4 Ω
Output Power (RMS) @ 14.4 VDC, THD 1%
- 4 Ch: 55 W x 4 (4 Ω)
- 4 Ch: 85 W x 4 (2 Ω)
- 3 Ch: 55 W x 2 (4 Ω) + 170 W x 1 (4 Ω)
- 3 Ch: 85 W x 2 (2 Ω) + 170 W x 1 (4 Ω)
- 2 Ch: 170 W x 2 (4 Ω)
Output Power (RMS) @ 14.4 VDC, THD 10%
- 4 Ch: 65 W x 4 (4 Ω)
- 4 Ch: 95 W x 4 (2 Ω)
- 3 Ch: 65 W x 2 (4 Ω) + 190 W x 1 (4 Ω)
- 3 Ch: 95 W x 2 (2 Ω) + 190 W x 1 (4 Ω)
- 2 Ch: 190 W x 2 (4 Ω)
INPUTS : PRE IN / SPEAKER IN
- Pre out FULL range (FRONT): Yes
- FRONT Ch. filters FULL: Yes
- Hi-Pass: 80 Hz @ 12 dB/Oct.
- Lo-Pass: 50 ÷ 500 Hz @ 12 dB/Oct.
- REAR Ch. filters FULL: Yes
- Hi-Pass: 80 Hz @ 12 dB/Oct.
- Lo-Pass: 50 ÷ 500 Hz @ 12 dB/Oct.
- FRONT Ch. MONO (on/off): Yes
- REAR Ch. MONO (on/off): Yes
- BOOST 50 Hz (select): (0 / 6 / 12) dB
Size/Weight
- Max size (mm / in.): 315 x 190 x 50 / 12.40 x 7.48 x 1.97
- Weight (kg / lb.): 2,62 / 5.77
More items from this seller
Similar Items
Email Enquiry
* indicates compulsory field.