Ad information
warranty 3 mth if installation done at AutoImage.
SPECIFICATIONS
Circuit system
OTL (output transformerless) circuit Pulse
power supply
Inputs
RCA pin jacks
High level input connector
Input level adjustment range
0.3 – 6 V (RCA pin jacks),
0.6 – 12 V (High level input)
Outputs
Speaker terminals
Speaker impedance
2 – 8 Ω (stereo)
4 – 8 Ω (when used as a bridging amplifier)
100 W × 2 (at 4 Ω)
Maximum outputs
222 W (BTL, at 4 Ω)
Rated outputs (supply voltage at 14.4 V)
35 W × 2 (20 Hz – 20 kHz, 0.04% THD, at 4 Ω)
40 W × 2 (20 Hz – 20 kHz, 0.1% THD, at 2 Ω)
80 W (Monaural) (20 Hz – 20 kHz, 0.1% THD,
at 4 Ω)
Frequency response
5 Hz – 80 kHz (
Harmonic distortion
0.005% or less (at 1 kHz, 4 Ω, 10 W)
Low-pass filter
80 Hz, –18 dB/oct
Power requirements
12 V DC car battery
(negative ground)
Power supply voltage
10.5 – 16 V
Current drain
at rated output : 12 A (4 Ω, 35 W × 2)
Remote input : 1.5 mA
Dimensions
Approx. 205 × 55 × 158 mm (w/h/d) not incl.
projecting parts and controls
Mass
Approx. 1.6 kg not incl. accessories
Supplied accessories
Mounting screws (4)
High level input cord (1)
Protection cap (1
- Car Audio Installation
- Car Audio Customisation
- Car Audio Tuning
- Car Security System Installation
- SoundProofing
Website: http://www.autoimage.com.sg/
Facebook: https://www.facebook.com/autoimage.sg/info
Ad information
warranty 3 mth if installation done at AutoImage.
SPECIFICATIONS
Circuit system
OTL (output transformerless) circuit Pulse
power supply
Inputs
RCA pin jacks
High level input connector
Input level adjustment range
0.3 – 6 V (RCA pin jacks),
0.6 – 12 V (High level input)
Outputs
Speaker terminals
Speaker impedance
2 – 8 Ω (stereo)
4 – 8 Ω (when used as a bridging amplifier)
100 W × 2 (at 4 Ω)
Maximum outputs
222 W (BTL, at 4 Ω)
Rated outputs (supply voltage at 14.4 V)
35 W × 2 (20 Hz – 20 kHz, 0.04% THD, at 4 Ω)
40 W × 2 (20 Hz – 20 kHz, 0.1% THD, at 2 Ω)
80 W (Monaural) (20 Hz – 20 kHz, 0.1% THD,
at 4 Ω)
Frequency response
5 Hz – 80 kHz (
Harmonic distortion
0.005% or less (at 1 kHz, 4 Ω, 10 W)
Low-pass filter
80 Hz, –18 dB/oct
Power requirements
12 V DC car battery
(negative ground)
Power supply voltage
10.5 – 16 V
Current drain
at rated output : 12 A (4 Ω, 35 W × 2)
Remote input : 1.5 mA
Dimensions
Approx. 205 × 55 × 158 mm (w/h/d) not incl.
projecting parts and controls
Mass
Approx. 1.6 kg not incl. accessories
Supplied accessories
Mounting screws (4)
High level input cord (1)
Protection cap (1
Merchant information
More items from this seller
Email Enquiry
* indicates compulsory field.