Jump to content

SOLD
 
Honda Base Badge (White)
- Cash & Carry
Condition
Brand New
Suitable For
Posted on: 22 Jan 2024 | Updated on : 03 Feb 2024

Merchant information

Blk 147 Bishan Street 11 S(570147)
91259516

Ad information

Emblem size (approximate) Height 8.8cm x Width 10.5cm.

 

Please indicate model when making purchase.

 

Installation method.

1. Remove original badge.

2. Clean the surfaces on the area where the base is to be installed and the back of the original badge.

3. Insert the wires through the pin hole on the boot, peel off the tape backing on the illuminated base and stick onto boot and connect the wires.

4. Peel off the tape backing on the top side of the illuminated base and stick the original badge on it.

5. Done.

 

Please make sure the area to stick the base is sufficient as it is bigger than the original badge.

If there is not pin-hole for inserting the wires, drilling of the boot cover will be required.

 

Price is for one piece (as seen in photo).

Please visit www.e-shoppinghouse.com for more of our products.

 

Due to unpredictable stock movement, certain items may be out of stock, kindly check the stock availability with us before heading over.

Please note that all purchases are strictly BY APPOINTMENT only.

 

Pickup timings:

  • Monday to Thursday: 9am to 9.30pm
  • Friday: 9am to 6pm (after 6pm to be pre-arranged)
  • Saturday: 9am to 6pm
  • Sundays and PHs: CLOSED

 

Pickup location:

BLK 147 BISHAN STREET 11 S(570147)
*Delivery and installation at buyer's own cost.

 

NOTE:

  • We may not be able to entertain walk-in customers. We will not be responsible if you walk-in without an appointment and we are unable to meet you or should you need to wait longer than expected.
  • Prices are not negotiable and are correct at the time of posting.
  • We reserve the right to amend the price based on the circumstances and the final price will be confirmed when order is placed.

Ad information

Emblem size (approximate) Height 8.8cm x Width 10.5cm.

 

Please indicate model when making purchase.

 

Installation method.

1. Remove original badge.

2. Clean the surfaces on the area where the base is to be installed and the back of the original badge.

3. Insert the wires through the pin hole on the boot, peel off the tape backing on the illuminated base and stick onto boot and connect the wires.

4. Peel off the tape backing on the top side of the illuminated base and stick the original badge on it.

5. Done.

 

Please make sure the area to stick the base is sufficient as it is bigger than the original badge.

If there is not pin-hole for inserting the wires, drilling of the boot cover will be required.

 

Price is for one piece (as seen in photo).

Merchant information

Blk 147 Bishan Street 11 S(570147)
91259516
Posted on: 22 Jan 2024 | Updated on : 03 Feb 2024

Email Enquiry

This enquiry will be sent directly to the seller.
* indicates compulsory field.
×
×
  • Create New...