Merchant information
460 Upper Serangoon Road S(534493)
( 1 more outlet ) |
||
9.30am - 6.30pm (Mon - Sat) Close on Sun & PHs | ||
94558833 62816739 62830300 |
Ad information
Hertz DSK 165.3 (2-way System)
Dieci car audio systems let you realize a high quality audio system with the utmost in simplicity. The woofers employ the exclusive V-cone profile for amazing off-axis response and detailed mid-high range. The TPU (Thermoplastic polyurethane) surround ensures linearity and reduction of unwanted resonance, even at high excursion. High-performance materials, such as the neodymium motor assembly and the PEI membrane, ensure an extended high frequency range. The passive filters are found directly on the supplied connection cables, along with a rich array of accessories increasing the install-friendliness and installation time.
Specifications
- Component: 2-way System
- Woofer Size: 6.5 inch (165 mm)
- Tweeter Size: 0.9 inch (24 mm)
- Power Handling (Peak): 160 Watts
- Power Handling (Continuous): 80 Watts
- Impedance: 4 Ohm
- Frequency Response (Hz): 50 ÷ 23 k
- Sensitivity: 93 dB SPL
- Woofer Magnet: High Density Flux Ferrite
- Tweeter Magnet: Neodymium
- Woofer cone: Water-repellent pressed paper
- Tweeter dome: PEI
- Crossover type: Hi Pass
- Crossover cut off: 3,5 kHz @ 12 dB Oct.
Features
- 24 mm PEI dome-cone tweeter.
- High efficiency annular acoustic lens.
- High energy neodymium magnet.
- Mounting accessories for external or embedded mounting
included. - Large motor assembly for mobile voice coil control.
- Pure copper voice coil, wound on conex former, for maximum lightness.
- V-cone for best off-axis response, clear mid-high frequency detail and powerful bass.
- TPU surround, for wide excursion and resonance damping.
- DIN size basket protected by abrasion-proof dust paint.
- Tin-plated, high current terminals.
- Silver-plated lead wires for maximum reliability and conductivity.
- Butyl rubber protective cover, against crashes and abrasions.
- Epoxy glue for basket and motor system provides perfect coupling.
- Low carbon content plates for maximum magnetic permeability and high heat dissipation.
Hertz DCX 165.3 (2-way Coaxial)
To meet all installation needs, without giving up on Hertz quality and performance, the Dieci coaxes were designed with maniacal care to provide a linear frequency response and ensure high reliability. A Neodymium magnet, PEI dome tweeter, built-in crossover, TPU (Thermoplastic polyurethane) surround and a pressed-paper cone provide the optimum ratio between installation friendliness and sound with dynamic and emotional impact.
Specifications
- Component: 2-way Coaxial
- Woofer Size: 6.5 inch (165 mm)
- Tweeter Size: 0.6 inch (15 mm)
- Power Handling (Peak): 120 Watts
- Power Handling (Continuous): 60 Watts
- Impedance: 4 Ohm
- Frequency Response (Hz): 60 ÷ 21 k
- Sensitivity: 93 dB SPL
- Woofer Magnet: High Density Flux Ferrite
- Tweeter Magnet: Neodymium
- Woofer cone: Water-repellent pressed paper
- Tweeter dome: PEI
Features
- Large motor assembly for mobile voice coil control.
- Pure copper voice coil, wound on conex former, for maximum lightness.
- Water-repellent treated paper cone.
- TPU surround, for wide excursion and resonance damping.
- Neodymium tweeter with PEI dome, for compactness and energy at high frequencies.
- DIN size basket protected by abrasion-proof dust paint.
- Tin-plated, high current terminals.
- Silver-plated lead wires for maximum reliability and conductivity.
- Butyl rubber protective cover, against crashes and abrasions.
- Epoxy glue for basket and motor system provides perfect coupling.
- Low carbon content plates for maximum magnetic permeability and high heat dissipation.
Ad information
Hertz DSK 165.3 (2-way System)
Dieci car audio systems let you realize a high quality audio system with the utmost in simplicity. The woofers employ the exclusive V-cone profile for amazing off-axis response and detailed mid-high range. The TPU (Thermoplastic polyurethane) surround ensures linearity and reduction of unwanted resonance, even at high excursion. High-performance materials, such as the neodymium motor assembly and the PEI membrane, ensure an extended high frequency range. The passive filters are found directly on the supplied connection cables, along with a rich array of accessories increasing the install-friendliness and installation time.
Specifications
- Component: 2-way System
- Woofer Size: 6.5 inch (165 mm)
- Tweeter Size: 0.9 inch (24 mm)
- Power Handling (Peak): 160 Watts
- Power Handling (Continuous): 80 Watts
- Impedance: 4 Ohm
- Frequency Response (Hz): 50 ÷ 23 k
- Sensitivity: 93 dB SPL
- Woofer Magnet: High Density Flux Ferrite
- Tweeter Magnet: Neodymium
- Woofer cone: Water-repellent pressed paper
- Tweeter dome: PEI
- Crossover type: Hi Pass
- Crossover cut off: 3,5 kHz @ 12 dB Oct.
Features
- 24 mm PEI dome-cone tweeter.
- High efficiency annular acoustic lens.
- High energy neodymium magnet.
- Mounting accessories for external or embedded mounting
included. - Large motor assembly for mobile voice coil control.
- Pure copper voice coil, wound on conex former, for maximum lightness.
- V-cone for best off-axis response, clear mid-high frequency detail and powerful bass.
- TPU surround, for wide excursion and resonance damping.
- DIN size basket protected by abrasion-proof dust paint.
- Tin-plated, high current terminals.
- Silver-plated lead wires for maximum reliability and conductivity.
- Butyl rubber protective cover, against crashes and abrasions.
- Epoxy glue for basket and motor system provides perfect coupling.
- Low carbon content plates for maximum magnetic permeability and high heat dissipation.
Hertz DCX 165.3 (2-way Coaxial)
To meet all installation needs, without giving up on Hertz quality and performance, the Dieci coaxes were designed with maniacal care to provide a linear frequency response and ensure high reliability. A Neodymium magnet, PEI dome tweeter, built-in crossover, TPU (Thermoplastic polyurethane) surround and a pressed-paper cone provide the optimum ratio between installation friendliness and sound with dynamic and emotional impact.
Specifications
- Component: 2-way Coaxial
- Woofer Size: 6.5 inch (165 mm)
- Tweeter Size: 0.6 inch (15 mm)
- Power Handling (Peak): 120 Watts
- Power Handling (Continuous): 60 Watts
- Impedance: 4 Ohm
- Frequency Response (Hz): 60 ÷ 21 k
- Sensitivity: 93 dB SPL
- Woofer Magnet: High Density Flux Ferrite
- Tweeter Magnet: Neodymium
- Woofer cone: Water-repellent pressed paper
- Tweeter dome: PEI
Features
- Large motor assembly for mobile voice coil control.
- Pure copper voice coil, wound on conex former, for maximum lightness.
- Water-repellent treated paper cone.
- TPU surround, for wide excursion and resonance damping.
- Neodymium tweeter with PEI dome, for compactness and energy at high frequencies.
- DIN size basket protected by abrasion-proof dust paint.
- Tin-plated, high current terminals.
- Silver-plated lead wires for maximum reliability and conductivity.
- Butyl rubber protective cover, against crashes and abrasions.
- Epoxy glue for basket and motor system provides perfect coupling.
- Low carbon content plates for maximum magnetic permeability and high heat dissipation.
Merchant information
Features & specs
Dieci component systems let you realize a high quality audio system with the utmost in simplicity. The woofers employ the exclusive V-cone® profile for amazing off-axis response and detailed mid-high range. The TPU (Thermoplastic polyurethane) surround ensures linearity and reduction of unwanted resonance, even at high excursion. High-performance materials, such as the neodymium motor assembly and the PEI membrane, ensure an extended high frequency range. The passive filters are found directly on the supplied connection cables, along with a rich array of accessories increasing the install-friendliness and installation time.
Specifications
- Component - Two way system
- Woofer size: mm (in.) 165 (6.5)
- Tweeter size: mm (in.) 24 (0.9)
- Power handling: W peak 160 | W continuous 80
- Impedance: Ω 4
- Frequency response: Hz 50 ÷ 23k
- Sensitivity: dB SPL 93
- Woofer Magnet size D·d·h: mm (in.) 80 x 40 x 15 (3.1 x 1.6 x 0.6)
- Woofer Voice coil Ø: mm (in.) 25 (1.0)
- Woofer magnet: High density flux ferrite
- Tweeter magnet: Neodymium
- Woofer cone: Water-repellent pressed paper
- Tweeter dome: PEI
- Woofer weight: kg (lb.) 0,74 (1.63)
- Tweeter weight: kg (lb.) 0,03 (0.07)
- Crossover weight: kg (lb.) 0,16 (0.35)
- Crossover: Hi Pass
- Crossover cut off: 3,5 kHz @ 12 dB Oct
More items from this seller
& 4 Other Models
& 1 Other Models
Similar Items
Email Enquiry
* indicates compulsory field.