Jump to content

SOLD
 
Audison SRx 4 Channel Amplifier (With Independent Fully Configurable Crossover Sections)
- Cash & Carry
Condition
Excellent [5/5]
Suitable For
All Models
Posted on: 15 Jun 2022 | Updated on : 15 Jun 2022

Merchant information

159 Sin Ming Road #01-09 Amtech Building S(575625)
9am - 6pm (Mon - Sat) 10am - 3pm (Sun) Closed on PHs
92269222
64555031

Ad information

4-channel amplifier, perfect for driving Front/Rear, Front/Sub or Multichannel systems, with independent, fully configurable, by-passable crossover sections. The SRx 4 can work in 4, 3 or 2-channel mode, with the advantage of the Speaker In hi-level inputs as well as the PRE-amp by-pass outputs for every installation requirement.


Preamplifier

  • High pass filter: Variable from 50Hz to 5000Hz measured at 12 dB / Octave

Power Amplifier

  • Power output: 65W per channel into 4 ohms

Amplifier Channels: 4

  • 90W per channel into 2 ohms
  • Bridge mode: Yes
  • Power: 180W into 4 ohms
  • Amplifier class: Class AB
  • Frequency response: 5 - 50kHz at +-3dB
  • Signal to noise ratio: 96dB
  • Input impedance: Unbalanced: 15k ohms
  • Damping factor: over 140 at frequencies from 1000Hz to1kHz at 4ohms

Body

  • Dimensions (WxHxD): 14.57 in x 2.20 in x 8.50 in
  • Weight: 8.16 Ib
We provide a range of services such as:
  • Car Audio Installation
  • Car Audio Customisation
  • Car Audio Tuning 
  • Car Security System Installation
  • SoundProofing
Call us or visit our website to find out more!
 
Website: http://www.autoimage.com.sg/
 
Facebook: https://www.facebook.com/autoimage.sg/info
 

Ad information

4-channel amplifier, perfect for driving Front/Rear, Front/Sub or Multichannel systems, with independent, fully configurable, by-passable crossover sections. The SRx 4 can work in 4, 3 or 2-channel mode, with the advantage of the Speaker In hi-level inputs as well as the PRE-amp by-pass outputs for every installation requirement.


Preamplifier

  • High pass filter: Variable from 50Hz to 5000Hz measured at 12 dB / Octave

Power Amplifier

  • Power output: 65W per channel into 4 ohms

Amplifier Channels: 4

  • 90W per channel into 2 ohms
  • Bridge mode: Yes
  • Power: 180W into 4 ohms
  • Amplifier class: Class AB
  • Frequency response: 5 - 50kHz at +-3dB
  • Signal to noise ratio: 96dB
  • Input impedance: Unbalanced: 15k ohms
  • Damping factor: over 140 at frequencies from 1000Hz to1kHz at 4ohms

Body

  • Dimensions (WxHxD): 14.57 in x 2.20 in x 8.50 in
  • Weight: 8.16 Ib

Merchant information

159 Sin Ming Road #01-09Amtech Building S(575625)
9am - 6pm (Mon - Sat) 10am - 3pm (Sun) Closed on PHs
92269222 / 64555031
Posted on: 15 Jun 2022 | Updated on : 15 Jun 2022

Features & specs

4-channel amplifier, perfect for driving Front/Rear, Front/Sub or Multichannel systems, with independent, fully configurable, by-passable crossover sections. The SRx 4 can work in 4, 3 or 2-channel mode, with the advantage of the Speaker In hi-level inputs as well as the PRE-amp by-pass outputs for every installation requirement.

 

Preamplifier

  • High pass filter: Variable from 50Hz to 5000Hz measured at 12 dB / Octave

Power Amplifier
  • Power output: 65W per channel into 4 ohms

Amplifier Channels: 4

  • 90W per channel into 2 ohms
  • Bridge mode: Yes
  • Power: 180W into 4 ohms
  • Amplifier class: Class AB
  • Frequency response: 5 - 50kHz at +-3dB
  • Signal to noise ratio: 96dB
  • Input impedance: Unbalanced: 15 kohms
  • Damping factor: over 140 at frequencies from 1000Hz to1kHz at 4ohms

Body

  • Dimensions (WxHxD): 14.57 in x 2.20 in x 8.50 in
  • Weight: 8.16 Ib
Consumer Reviews
Bought this used amp solely based on the Audison brand and because it is made in Italy. Initial configuration didn't bring out the power and clarity of it due to only 3 channel output switch was not selected. After a careful study on the manual and proper configuration by my installer, the front speakers and sub came alive and the SQ was really good even for an entry level amp. The design and finishing is demure but modern and lasting complemented by an aluminum cover over the easy accessed controls. Had to install on my rear seats as it was slightly too long for under seat but turned out to be a better option as it was better ventilated and an eye candy(the blue-lighted SRX4 words) every time I opened the boot.
Reviewed by Jaspok 
Installed this amp to supplement my audio system. Flexible; used as 3-channel. Incredible quality and plenty of thump. Great value; don't spend more money on an amp, this is all you need from a quality brand. Installation; for flush mounting it requires skill to make a professional-grade cut through carpet board due to unusual top surface profile. Other than that, very easy to install. An additional comment, the amp requires air space around the longer sides to cool. Amp is still okay with convection cooling, but cannot expose sides to any material without possible melting of that material or overheating the amp.
Reviewed by LilOkie 

Similar Items

Related Searches : Multi-channel Amplifier

Email Enquiry

This enquiry will be sent directly to the seller.
* indicates compulsory field.
×
×
  • Create New...