Package Inclusive of:

• Sony XS-162ES Component Speakers 
• Sony XS-160ES Coaxial Speakers

Looking for additional sub-woofer? Call to enquire now!

XS-162ES - 6 ½" (16cm) Mobile ES 2-Way Component Speakers

The XS-162ES 6.5" (16cm) component speakers deliver astonishing clarity and imaging to your in-car listening. Redefine your listening with these innovative Mobile ES speakers.

Features:

MRC Aramid Fiber Matrix Woofer

The main speaker diaphragm on the XS-162ES is crafted from Sony's unique Mica Reinforced Cellular (MRC) material. This rigid but lightweight driver allows for a much more precise response than conventional driver materials, for smoother and more natural sound characteristics.

Optimal Formulation

Embedding MRC in a unique matrix with aramid fibers suppresses diaphragm resonance and minimises distortion — not only in the lows, but also in the mid and higher frequencies. The result is sound that is powerful at all frequencies and uncommonly clean — even at high volume.

Bi-Amp Capable Crossover With Gain Selector

The audiophile-grade crossover features an optimal, lower-resistance film capacitor for smooth high-end. It's bi-amp capable design mitigates current distortion to the tweeter when running the woofer with high input levels. A dedicated gain selector helps keep balance of woofer and tweeter signal levels, and enables tweeter level adjustment even when driving the components from a single amplifier.

Separated Notch Edge Surround

The woofer surround features another proprietary Sony technology, with distinctive curved notches improving the vertical amplitude symmetry, for dramatically reduced distortion and enhanced clarity.

Five-Beam Frame Structure & Dynamic Air Diffuser

The Five-beam Frame design disperses resonance while the integrated Dynamic Air Diffuser ensures efficient air circulation for smooth cone travel and cooling of the voice coil.

Tweeters To Hit The High Notes

Compatible with High-Resolution Audio, a soft dome tweeter diaphragm is directly attached on the voice coil, designed to cover your music's ultra-high ends, with a frequency range extending up to 40kHz.

Progressive Height Rate Spider

The acoustically-optimised spider allows for higher power handling and airflow, with a profile designed for more rapid and precise cushioning of the speaker cone.

Phase Plug

The resonance damping phase plug on the XS-162ES woofer helps realise ideal frequency response, right up to the crossover point with the matched tweeters. A rigid aluminium bobbin and Dynamic Air Diffuser further support the speaker's wide frequency response, for controlled and dynamic bass delivery.

Structure Cutaway

Discover structures of the Mobile ES speaker, including newly applied mechanical approaches such as Separated Notch Edge Surround, Five-beam Frame design, and Dynamic Air Diffuser.

Specifications:

• Size & Weight

WEIGHT (WOOFER): 950 g

WEIGHT (TWEETER): 60 g

WEIGHT (NETWORK BOX): 160 g

• Speaker System

CONFIGURATION: Component, 2-way

SIZE: 6 1/2" (16 cm)

• General Features

PEAK POWER: 270 W

RMS POWER: 90 W

RATED POWER: 60 W

EFFECTIVE FREQUENCY RANGE: 40-40,000 Hz

OUTPUT SOUND PRESSURE: 89 dB ±2dB SPL (1W,1m)

IMPEDANCE (OHMS): 4

• Woofer

TYPE: Cone

SURROUND MATERIAL: Rubber (Separated Notch)

WOOFER MAGNET MATERIAL: Ferrite

WOOFER DIAPHRAGM MATERIAL: MRC Aramid Fiber Matrix

• Tweeter

TYPE: Soft Dome

DIAMETER: 1" (2.5 cm)

TWEETER DIAPHRAGM MATERIAL: Synthetic Fiber

TWEETER MAGNET MATERIAL: Neodymium

XS-160ES - 6 ½" (16 cm) Mobile ES 2-Way Coaxial Speakers

Clarity and power come together in the XS-160ES 2-way speakers. Enjoy a premium Mobile ES experience and the ease of installation from the compact coaxial design.

Features:

MRC Aramid Fiber Matrix Woofer

The main speaker diaphragm on the XS-160ES is crafted from Sony's unique Mica Reinforced Cellular (MRC) material. This rigid but lightweight driver allows for a much more precise response than conventional driver materials, for smoother and more natural sound characteristics.

Optimal Formulation

Embedding MRC in a unique matrix with aramid fibers suppresses diaphragm resonance and minimises distortion — not only in the lows, but also in the mid and higher frequencies. The result is sound that is powerful at all frequencies and uncommonly clean — even at high volume.

Separated Notch Edge Surround

The woofer surround features another proprietary Sony technology, with distinctive curved notches improving the vertical amplitude symmetry, for dramatically reduced distortion and enhanced clarity.

Five-Beam Frame Structure & Dynamic Air Diffuser

The Five-beam Frame design disperses resonance while the integrated Dynamic Air Diffuser ensures efficient air circulation for smooth cone travel and cooling of the voice coil.

Progressive Height Rate Spider

The acoustically-optimised spider allows for higher power handling and airflow, with a profile designed for more rapid and precise cushioning of the speaker cone.

Tweeter To Hit The High Notes

Compatible with High-Resolution Audio, a soft dome tweeter diaphragm is directly attached on the voice coil, designed to cover your music's ultra-high ends, with a frequency range extending up to 40kHz.

Structure Cutaway

Discover structures of the Mobile ES speaker, including newly applied mechanical approaches such as Separated Notch Edge Surround, Five-beam Frame design, and Dynamic Air Diffuser.

Specifications:

• Size & Weight:

WEIGHT: 990 g

• Speaker System:

CONFIGURATION: Coaxial, 2-way

SIZE: 6 1/2" (16 cm)

• General Features:

PEAK POWER: 270 W

RMS POWER: 90 W

RATED POWER: 60 W

EFFECTIVE FREQUENCY RANGE: 45-40,000 Hz

OUTPUT SOUND PRESSURE: 89 dB ±2dB SPL (1W,1m)

IMPEDANCE (OHMS): 4

• Woofer:

TYPE: Cone

SURROUND MATERIAL: Rubber (Separated Notch)

WOOFER MAGNET MATERIAL: Ferrite

WOOFER DIAPHRAGM MATERIAL: MRC Aramid Fiber Matrix

• Tweeter:

TYPE: Soft Dome

DIAMETER: 13/16" (2.0cm)

TWEETER DIAPHRAGM MATERIAL: Synthetic Fiber

TWEETER MAGNET MATERIAL: Neodymium