Jump to content

 
Audison APBX 10 AS2 Active Sub Box
$1,000
Condition
Brand New
Suitable For
All Models
Posted on: 19 Jun 2024 | Updated on : 19 Jun 2024

Merchant information

160 Sin Ming Drive #08-02 Sin Ming AutoCity S(575722)
9.30am - 7pm (Mon - Sun)
92325621
62661719

Ad information

The Prima APBX 10 AS2 active subwoofer, with the 10-inch driver, features a dedicated high performance amplification module that enhances all the passive box technologies, such as the 2S² (2 Sides / 2 Sounds) design, the Plug & Play terminal block and ultra-compact size.

The amplification module, with power outputs of 400W RMS, is developed with he-li technology (high efficiency / low impedance), which thanks to the absence of the DC-DC voltage booster reaches the impressive 90% efficiency level, very close to the theoretical limit of the D-Class. New input stage DBT (Dynamic Bass Tracking) technology allows 100% use of the he-li (High-Efficiency Low Impedance) amplifier power and to enjoy a tense and dynamic bass even at very high listening volumes.
Eliminating the voltage booster was made possible thanks to the development of the new dual coil drivers, which inherit all the technological background of the Prima subwoofers, but differ for the ultra-low impedance (0.16 ohms for APBX 10 AS).
This feature ensures a perfect synergy with the he-li (High-Efficiency Low Impedance) technology, maximizing the combination of amplifierspeakers and sealed boxto obtain low, powerful and crisp frequencies.

The controls section is complete and provides optimal regulation of the low-frequency emission in the car cabin. The Butterworth low pass filter at 12dB/Oct. with variable cut-off frequency (50-200 Hz) can be bypassed, when used with an AP bit processor with pre-out output dedicated to the sub. The adjustable bass-boost control (0 ÷ 6 dB) at 45 Hz allows the user to emphasize the response on the lower side of the spectrum.

The high-level speaker-in input on the multi-pole connector eases the integration with OEM audio systems while the low-level input on RCA is dedicated to the connection with aftermarket sources. The subwoofer automatic turn on/off function ART (Automatic Remote Turn-On) can be configured to be controlled by the source’s remote signal, by the voltage variation on the high-level input or by the audio signal on both inputs. Phase control (0 – 180 °) completes the equipment.

The SSP (Sub Smart Plug) terminal block is provided with a single Plug&Play connector to be able to disconnect the box easily and safely.

Technical Data

CompACTIVE SUB BOX
Subwoofer size mm (in.)250 (10)
Subwoofer Voice coil Ø mm (in.)60 (2.36)
Output power (RMS)400 W Continuous Power / 800 W Peak Power
Impedance Ω0,16
Sub box size mm (in.)460 (18.11) x 158 (6.22) x 338 (13.31)
MagnetHigh density flux ferrite
ConeWater-repellent pressed paper
Weight of one component kg (lb)9,4 (29.72)
High end does not mean high price. At SingTrade, we believe the best sounding system is not just because of the usage of expensive products, but also having the system properly designed. Only with proper design and integration, the system can be utilized to it's fullest potential.
 
With a range of audio products, coupled with a group of experts, we strive to provide the best system and performance that suits every individual's budget. This is how we define value.
 
Call us or visit our Facebook page to find out more!
 
Singtrade Car Audio & Accessories 
160, Sin Ming Drive #08-02, Sin Ming AutoCity, S(575722)
TEL: 6266 1719
H/P: +65 92325621
 
1528179628.jpg

Ad information

The Prima APBX 10 AS2 active subwoofer, with the 10-inch driver, features a dedicated high performance amplification module that enhances all the passive box technologies, such as the 2S² (2 Sides / 2 Sounds) design, the Plug & Play terminal block and ultra-compact size.

The amplification module, with power outputs of 400W RMS, is developed with he-li technology (high efficiency / low impedance), which thanks to the absence of the DC-DC voltage booster reaches the impressive 90% efficiency level, very close to the theoretical limit of the D-Class. New input stage DBT (Dynamic Bass Tracking) technology allows 100% use of the he-li (High-Efficiency Low Impedance) amplifier power and to enjoy a tense and dynamic bass even at very high listening volumes.
Eliminating the voltage booster was made possible thanks to the development of the new dual coil drivers, which inherit all the technological background of the Prima subwoofers, but differ for the ultra-low impedance (0.16 ohms for APBX 10 AS).
This feature ensures a perfect synergy with the he-li (High-Efficiency Low Impedance) technology, maximizing the combination of amplifierspeakers and sealed boxto obtain low, powerful and crisp frequencies.

The controls section is complete and provides optimal regulation of the low-frequency emission in the car cabin. The Butterworth low pass filter at 12dB/Oct. with variable cut-off frequency (50-200 Hz) can be bypassed, when used with an AP bit processor with pre-out output dedicated to the sub. The adjustable bass-boost control (0 ÷ 6 dB) at 45 Hz allows the user to emphasize the response on the lower side of the spectrum.

The high-level speaker-in input on the multi-pole connector eases the integration with OEM audio systems while the low-level input on RCA is dedicated to the connection with aftermarket sources. The subwoofer automatic turn on/off function ART (Automatic Remote Turn-On) can be configured to be controlled by the source’s remote signal, by the voltage variation on the high-level input or by the audio signal on both inputs. Phase control (0 – 180 °) completes the equipment.

The SSP (Sub Smart Plug) terminal block is provided with a single Plug&Play connector to be able to disconnect the box easily and safely.

Technical Data

CompACTIVE SUB BOX
Subwoofer size mm (in.)250 (10)
Subwoofer Voice coil Ø mm (in.)60 (2.36)
Output power (RMS)400 W Continuous Power / 800 W Peak Power
Impedance Ω0,16
Sub box size mm (in.)460 (18.11) x 158 (6.22) x 338 (13.31)
MagnetHigh density flux ferrite
ConeWater-repellent pressed paper
Weight of one component kg (lb)9,4 (29.72)

Merchant information

160 Sin Ming Drive #08-02Sin Ming AutoCity S(575722)
9.30am - 7pm (Mon - Sun)
92325621 / 62661719
Posted on: 19 Jun 2024 | Updated on : 19 Jun 2024

Similar Items

Related Searches : Woofer

Email Enquiry

This enquiry will be sent directly to the seller.
* indicates compulsory field.
×
×
  • Create New...