Brax GX2000 2-Ch Amplifier
$4,388 Cash & Carry
Condition
Brand New
Category
Suitable For
All Models
Posted on: 28 Mar 2024 | Updated on : 28 Mar 2024
Ad information
Features
- Low internal resistance due to solid gold-plated terminals for power cables up to 50 mm²/ gauge 1 and speaker cables up to 6 mm²/ gauge 6
- Separate terminal to connect a BRAX IPC directly to the switching transistors
- Signal inputs with high-end signal capacitors for a perfect and pure sound quality
- Each amplifier is available in black or silver finish either with a short or extended heatsink
- Especially developed transformers with high-efficient core materials guarantee a total output power of more than 1,000 Watts
- Solid heatsink made of special aluminium alloy for a perfect cooling of the transistors in the power supply and output stage
- 32 hand-selected high-end MOSFET transistors for brilliant sound
- The level controls for the input sensitivity adjustment are placed under the name plate, thus the amplifier has a clean and puristic design
- Adjustment range 1.0 V to 8.0 V
- Handcrafted in Germany
Technical data
- Output power RMS:
- @ 4 Ohms: 2 x 290 Watts
- @ 2 Ohms: 2 x 530 Watts
- @ 1 Ohm: -
- bridged @ 4 Ohms: 1 x 1,060 Watts
- bridged @ 2 Ohms: - - Amplifier technology: Class AB
- Inputs:
2 x Cinch
1 x Remote In - Input sensitivity: RCA / Cinch 1.0 - 8.0 Volts
- Input impedance RCA / Cinch: 10 kOhms
- Input impedance highlevel: -
- Outputs: 2 x Speaker output
- Output voltage RCA / Cinch: -
- Signal converter for digital input: -
- Frequency response: 10 Hz - 80 kHz
- Bass boost: -
- Highpass: -
- Lowpass: -
- Bandpass: -
- Subsonic: -
- Phase: -
- Slope high- / lowpass: -
- Slope subsonic / lowpass: -
- Signal-to-noise ratio digital input: -
- Signal-to-noise ratio analog input: > 120 dB (A-weighted)
- Distortion (THD): < 0.0009 %
- Damping factor: > 1000
- Operating voltage: 9 - 16 Volts (max. 5 sec. down to 6 Volts)
- Idle current: 3.5 A
- Fuse: 4 x 30 A LP-Mini-fuse (APS)
- Additional features: Colour Protection System, BRAX Power Stabilizer connector, Start-Stop capability
- Dimensions (H x W x D):
Heatsink „Short“: 53 x 237.5 x 433 mm / 2.09 x 9.35 x 17.05"
Heatsink „Long“: 53 x 237.5 x 473 mm / 2.09 x 9.35 x 18.62" - Net weight:
Heatsink „Short“: 8.1 kg
Heatsink „Long“: 8.5 kg
D Legend Auto Accessories
Blk 5068 Ang Mo Kio Industrial Park 2
#01-1463 / #01-1467 / #01-1469
Singapore 569571
Ad information
Features
- Low internal resistance due to solid gold-plated terminals for power cables up to 50 mm²/ gauge 1 and speaker cables up to 6 mm²/ gauge 6
- Separate terminal to connect a BRAX IPC directly to the switching transistors
- Signal inputs with high-end signal capacitors for a perfect and pure sound quality
- Each amplifier is available in black or silver finish either with a short or extended heatsink
- Especially developed transformers with high-efficient core materials guarantee a total output power of more than 1,000 Watts
- Solid heatsink made of special aluminium alloy for a perfect cooling of the transistors in the power supply and output stage
- 32 hand-selected high-end MOSFET transistors for brilliant sound
- The level controls for the input sensitivity adjustment are placed under the name plate, thus the amplifier has a clean and puristic design
- Adjustment range 1.0 V to 8.0 V
- Handcrafted in Germany
Technical data
- Output power RMS:
- @ 4 Ohms: 2 x 290 Watts
- @ 2 Ohms: 2 x 530 Watts
- @ 1 Ohm: -
- bridged @ 4 Ohms: 1 x 1,060 Watts
- bridged @ 2 Ohms: - - Amplifier technology: Class AB
- Inputs:
2 x Cinch
1 x Remote In - Input sensitivity: RCA / Cinch 1.0 - 8.0 Volts
- Input impedance RCA / Cinch: 10 kOhms
- Input impedance highlevel: -
- Outputs: 2 x Speaker output
- Output voltage RCA / Cinch: -
- Signal converter for digital input: -
- Frequency response: 10 Hz - 80 kHz
- Bass boost: -
- Highpass: -
- Lowpass: -
- Bandpass: -
- Subsonic: -
- Phase: -
- Slope high- / lowpass: -
- Slope subsonic / lowpass: -
- Signal-to-noise ratio digital input: -
- Signal-to-noise ratio analog input: > 120 dB (A-weighted)
- Distortion (THD): < 0.0009 %
- Damping factor: > 1000
- Operating voltage: 9 - 16 Volts (max. 5 sec. down to 6 Volts)
- Idle current: 3.5 A
- Fuse: 4 x 30 A LP-Mini-fuse (APS)
- Additional features: Colour Protection System, BRAX Power Stabilizer connector, Start-Stop capability
- Dimensions (H x W x D):
Heatsink „Short“: 53 x 237.5 x 433 mm / 2.09 x 9.35 x 17.05"
Heatsink „Long“: 53 x 237.5 x 473 mm / 2.09 x 9.35 x 18.62" - Net weight:
Heatsink „Short“: 8.1 kg
Heatsink „Long“: 8.5 kg
Merchant information
Posted on: 28 Mar 2024 | Updated on : 28 Mar 2024
More items from this seller
Similar Items
Brax Matrix ML1 Tweeter
$1,618
Brax Matrix ML6P Subwoofer
$2,088
Brax Graphic GL1 Tweeter
$1,088
Brax DSP 12-Ch Processor
$8,588
Related Searches :
2-Channel Amplifier
Email Enquiry
This enquiry will be sent directly to the seller.
* indicates compulsory field.
* indicates compulsory field.