Jump to content

 
Helix P SIX DSP MK2 6-Ch Amplifier (With Integrated 8-Ch DSP)
$2,300
Condition
Brand New
Suitable For
All Models
Posted on: 15 Mar 2024 | Updated on : 15 Mar 2024

Merchant information

160 Sin Ming Drive #08-02 Sin Ming AutoCity S(575722)
10am - 7pm (Mon - Sun)
92325621
62661719

Ad information

The HELIX P SIX DSP MK2 6-channel amplifier is not built to solely deliver loads of clean power; it also incorporates a cutting-edge 8-channel DSP with outstanding processing power. This amalgamation sets a completely new standard with its “Ultra HD Class D” amplifier technology.

Features

  • New “Ultra HD Class D” concept which combines the high-end sound quality of Class AB technology with the benefits of Class D amplifiers
  • Full audio bandwidth up to more than 40 kHz thanks to 96 kHz sampling rate
  • Cutting-edge, extremely powerful “fixed point” Audio DSP with 64 Bit resolution and 1.2 billion MAC operations per second
  • 24 Volts compatible without the need to make any changes to the unit
  • Six speaker outputs with up to 230 Watts RMS into 2 Ohms
  • Two processed RCA outputs
  • Inputs: 6 x RCA, 6 x Highlevel with up to 20V RMS input sensitivity, optical SPDIF input
  • Smart highlevel input with ADEP circuit
  • HELIX Extension Card slot (HEC) for additional input / output modules like Bluetooth® Audio Streaming, High Resolution Audio Streaming via USB etc.
  • Compact design with low heat dissipation thanks to ­extraordinary efficiency
  • Automatic Remote switch


Special features:

Ultra HD Class D amplifier technology with 96 kHz sampling rate
The HELIX P SIX DSP MK2 is the first Class D amplifier with integrated DSP on the market that runs at 96 kHz sampling rate. Therefore the audio bandwidth is no longer limited to 22 kHz, but allows an extended frequency response to more than 40 kHz. The higher sampling rate has only been possible by implementing the latest DSP and amplifier chip sets.
The result: a Class D amplifier with an unprecedented sound quality.

Ready for 24 V
It is possible to operate the P SIX DSP MK2 with a supply voltage of 12 Volts or 24 Volts (e.g. as usual in trucks) without the need to make any changes to the unit. In both operating modes the amplifier will have equal performance characteristics. This guarantees maximum flexibility for numerous applications.

Smart highlevel input
The latest generation of OE car radios incorporates sophisticated possibilities of diagnosing the connected speakers. If an usual amplifier will be hooked up failure messages and loss of specific features (e.g. fader function) are often the result - but not with the P SIX DSP MK2.
The new ADEP circuit (Advanced Diagnostics Error Protection) avoids all these problems without loading the speaker outputs of the OE radio during high volumes unnecessarily.

Power Save Mode
The Power Save Mode is incorporated in the basic setup. It allows to significantly reduce the power consumption of the P SIX DSP MK2 and connected amplifiers once there’s no input signal present for more than 60 seconds. Please note that in many up-to-date cars with “CAN” or any other internal bus structures it may happen that the radio remains “invisibly” turned on for up to 45 min. even after leaving the car! Once the “Power Save Mode“ is active the remote output (Rem Out) and the internal amplifier stages will be turned off. The HELIX P SIX DSP MK2 will reactivate the remote output and the internal amplifier stages within a second if a music signal is applied. It is possible to either modify the turn-off time of 60 sec. or completely deactivate the “Power Save Mode” via the DSP PC-Tool software.

Start-Stop capability
The switched power supply of the HELIX P SIX DSP MK2 assures a constant internal supply voltage even if the battery’s voltage drops to 6 Volts during engine crank.

Automatic Digital Signal Detection
Switching from analog input to the digital input is done automatically as soon as a signal is detected on the Optical Input. This feature can be deactivated in the DSP PC-Tool software. Alternatively you can use an optional remote control for manual switching between analog and digital inputs.


Note: The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Audiotec Fischer GmbH is under license. Other trademarks and trade names are those of their respective owners.


Technical data

Output power RMS / max.:
- @ 4 Ohms: Channel A - F: 120 / 240 Watts per channel
- @ 2 Ohms: Channel C - F: 230 / 460 Watts per channel
- @ 1 Ohm: - 
- bridged @ 4 Ohms: - 
- bridged @ 2 Ohms: - 

Max. output power per channel*:
Channel A - F: up to 140 Watts RMS @ 4 Ohms
Channel C - F: up to 260 Watts RMS @ 2 Ohms

Amplifier technology: Ultra HD Class D

Inputs:
6 x RCA / Cinch
6 x Highlevel speaker input
1 x Optical SPDIF (12 - 96 kHz)
1 x Remote In

Input sensitivity:
RCA / Cinch 2 - 4 Volts or 4 - 8 Volts
Highlevel 5 - 10 Volts or 10 - 20 Volts

Input impedance RCA / Cinch: 64 kOhms

Input impedance highlevel: 13 Ohms oder 64 kOhms

Outputs:
6 x Speaker output
2 x RCA / Cinch
2 x Remote Out

Output voltage RCA / Cinch: 3 Volts RMS

Frequency response: 20 Hz - 44,000 Hz

DSP resolution: 64 Bit

DSP power: 295 MHz (1.2 billion MAC operations/second)

Sampling rate: 96 kHz

DSP type: Audio signal processor

Signal converters:
A/D: BurrBrown
D/A: BurrBrown

Signal-to-noise ratio digital input: 105 dB (A-weighted)

Signal-to-noise ration analog input: 100 dB (A-weighted)

Distortion (THD): < 0,008 %

Damping factor: > 100

Operating voltage: 10.5 - 32 Volts (max. 5 sec.down to 6 Volts)

Idle current: 2200 mA

Max. remote output current: 500 mA

Fuse: 3 x 20 A LP-Mini-fuse (APS)

Additional features: HEC slot, ADEP circuit, Auto Remote switch, Control Input

Dimensions (H x W x D): 50 x 260 x 190 mm / 1.97 x 10.24 x 7.48“

* In typical multi-channel applications (2- / 3-way system + rear + subwoofer)

High end does not mean high price. At SingTrade, we believe the best sounding system is not just because of the usage of expensive products, but also having the system properly designed. Only with proper design and integration, the system can be utilized to it's fullest potential.
 
With a range of audio products, coupled with a group of experts, we strive to provide the best system and performance that suits every individual's budget. This is how we define value.
 
Call us or visit our Facebook page to find out more!
 
Singtrade Car Audio & Accessories 
160, Sin Ming Drive #08-02, Sin Ming AutoCity, S(575722)
TEL: 6266 1719
H/P: +65 92325621
 
1528179628.jpg

Ad information

The HELIX P SIX DSP MK2 6-channel amplifier is not built to solely deliver loads of clean power; it also incorporates a cutting-edge 8-channel DSP with outstanding processing power. This amalgamation sets a completely new standard with its “Ultra HD Class D” amplifier technology.

Features

  • New “Ultra HD Class D” concept which combines the high-end sound quality of Class AB technology with the benefits of Class D amplifiers
  • Full audio bandwidth up to more than 40 kHz thanks to 96 kHz sampling rate
  • Cutting-edge, extremely powerful “fixed point” Audio DSP with 64 Bit resolution and 1.2 billion MAC operations per second
  • 24 Volts compatible without the need to make any changes to the unit
  • Six speaker outputs with up to 230 Watts RMS into 2 Ohms
  • Two processed RCA outputs
  • Inputs: 6 x RCA, 6 x Highlevel with up to 20V RMS input sensitivity, optical SPDIF input
  • Smart highlevel input with ADEP circuit
  • HELIX Extension Card slot (HEC) for additional input / output modules like Bluetooth® Audio Streaming, High Resolution Audio Streaming via USB etc.
  • Compact design with low heat dissipation thanks to ­extraordinary efficiency
  • Automatic Remote switch


Special features:

Ultra HD Class D amplifier technology with 96 kHz sampling rate
The HELIX P SIX DSP MK2 is the first Class D amplifier with integrated DSP on the market that runs at 96 kHz sampling rate. Therefore the audio bandwidth is no longer limited to 22 kHz, but allows an extended frequency response to more than 40 kHz. The higher sampling rate has only been possible by implementing the latest DSP and amplifier chip sets.
The result: a Class D amplifier with an unprecedented sound quality.

Ready for 24 V
It is possible to operate the P SIX DSP MK2 with a supply voltage of 12 Volts or 24 Volts (e.g. as usual in trucks) without the need to make any changes to the unit. In both operating modes the amplifier will have equal performance characteristics. This guarantees maximum flexibility for numerous applications.

Smart highlevel input
The latest generation of OE car radios incorporates sophisticated possibilities of diagnosing the connected speakers. If an usual amplifier will be hooked up failure messages and loss of specific features (e.g. fader function) are often the result - but not with the P SIX DSP MK2.
The new ADEP circuit (Advanced Diagnostics Error Protection) avoids all these problems without loading the speaker outputs of the OE radio during high volumes unnecessarily.

Power Save Mode
The Power Save Mode is incorporated in the basic setup. It allows to significantly reduce the power consumption of the P SIX DSP MK2 and connected amplifiers once there’s no input signal present for more than 60 seconds. Please note that in many up-to-date cars with “CAN” or any other internal bus structures it may happen that the radio remains “invisibly” turned on for up to 45 min. even after leaving the car! Once the “Power Save Mode“ is active the remote output (Rem Out) and the internal amplifier stages will be turned off. The HELIX P SIX DSP MK2 will reactivate the remote output and the internal amplifier stages within a second if a music signal is applied. It is possible to either modify the turn-off time of 60 sec. or completely deactivate the “Power Save Mode” via the DSP PC-Tool software.

Start-Stop capability
The switched power supply of the HELIX P SIX DSP MK2 assures a constant internal supply voltage even if the battery’s voltage drops to 6 Volts during engine crank.

Automatic Digital Signal Detection
Switching from analog input to the digital input is done automatically as soon as a signal is detected on the Optical Input. This feature can be deactivated in the DSP PC-Tool software. Alternatively you can use an optional remote control for manual switching between analog and digital inputs.


Note: The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Audiotec Fischer GmbH is under license. Other trademarks and trade names are those of their respective owners.


Technical data

Output power RMS / max.:
- @ 4 Ohms: Channel A - F: 120 / 240 Watts per channel
- @ 2 Ohms: Channel C - F: 230 / 460 Watts per channel
- @ 1 Ohm: - 
- bridged @ 4 Ohms: - 
- bridged @ 2 Ohms: - 

Max. output power per channel*:
Channel A - F: up to 140 Watts RMS @ 4 Ohms
Channel C - F: up to 260 Watts RMS @ 2 Ohms

Amplifier technology: Ultra HD Class D

Inputs:
6 x RCA / Cinch
6 x Highlevel speaker input
1 x Optical SPDIF (12 - 96 kHz)
1 x Remote In

Input sensitivity:
RCA / Cinch 2 - 4 Volts or 4 - 8 Volts
Highlevel 5 - 10 Volts or 10 - 20 Volts

Input impedance RCA / Cinch: 64 kOhms

Input impedance highlevel: 13 Ohms oder 64 kOhms

Outputs:
6 x Speaker output
2 x RCA / Cinch
2 x Remote Out

Output voltage RCA / Cinch: 3 Volts RMS

Frequency response: 20 Hz - 44,000 Hz

DSP resolution: 64 Bit

DSP power: 295 MHz (1.2 billion MAC operations/second)

Sampling rate: 96 kHz

DSP type: Audio signal processor

Signal converters:
A/D: BurrBrown
D/A: BurrBrown

Signal-to-noise ratio digital input: 105 dB (A-weighted)

Signal-to-noise ration analog input: 100 dB (A-weighted)

Distortion (THD): < 0,008 %

Damping factor: > 100

Operating voltage: 10.5 - 32 Volts (max. 5 sec.down to 6 Volts)

Idle current: 2200 mA

Max. remote output current: 500 mA

Fuse: 3 x 20 A LP-Mini-fuse (APS)

Additional features: HEC slot, ADEP circuit, Auto Remote switch, Control Input

Dimensions (H x W x D): 50 x 260 x 190 mm / 1.97 x 10.24 x 7.48“

* In typical multi-channel applications (2- / 3-way system + rear + subwoofer)

Merchant information

160 Sin Ming Drive #08-02Sin Ming AutoCity S(575722)
10am - 7pm (Mon - Sun)
92325621 / 62661719
Posted on: 15 Mar 2024 | Updated on : 15 Mar 2024

Similar Items

Related Searches : Multi-channel Amplifier

Email Enquiry

This enquiry will be sent directly to the seller.
* indicates compulsory field.
×
×
  • Create New...