Jump to content

 
Helix DSP.2 Processor
$1,099
Condition
Brand New
Suitable For
All Models
Posted on: 07 Sep 2019 | Updated on : 12 Sep 2019 | 72 views

Merchant information

25 Kaki Bukit Road 4 #01-27 Synergy @ KB S(417800)
9am - 7pm (Mon - Sun & PHs)
87988081 / 67021557

Ad information

Product highlights:

  • Extremely powerful “fixed point” Audio DSP with 64 Bit resolution and 1.2 billion MAC operations per second
  • HELIX Extension Card slot (HEC) for additional input/output modules like Bluetooth Audio Streaming, High-Resolution Audio Streaming via USB etc.
  • Smart high-level input with ADEP circuit (Advanced Diagnostics Error Protection)
  • Start-Stop capability down to 6V supply voltage
  • Freely definable signal routing with separate matrices for line, SPDIF and HEC/AUX
  • Time alignment with up to 20 ms delay time per channel, additionally reverse time alignment for in-phase summation of the inputs
  • Optimized signal path and power supply for further improved sound quality
  • “Ground lift” switch to avoid ground loops
  • Control input for connecting remote controls and accessories
  • Inputs: 6 x RCA/Cinch, 6 x High-level and 1 x optical SPDIF
  • Outputs: 8 x RCA/Cinch with max. 6 Volts output voltage
  • Easy configuration thanks to the professional and user-friendly DSP PC-Tool Version 4 software


Smart high-level input

The latest generation of OE car radios incorporates sophisticated possibilities of diagnosing the connected speakers. If a common signal processor will be hooked up failure messages and loss of specific features (e.g. fader function) quite often appears – but not with the DSP.2.

The new ADEP circuit (Advanced Diagnostics Error Protection) avoids all these problems without loading the speaker outputs of the OE radio during high volumes unnecessarily.


Power Save Mode

The Power Save Mode is incorporated in the basic setup. It allows to significantly reduce the power consumption of the amplifiers that are connected to the Helix DSP.2 once there’s no input signal present for more than 60 seconds. Please note that in many up-to-date cars with “CAN” or any other internal bus structures it may happen that the radio remains “invisibly” turned on for up to 45 min. even after locking and leaving the car! Once the “Power Save Mode“ is active the remote output and therefore the connected amplifiers will be turned off. The Helix DSP.2 will reactivate the remote output within a second if a music signal is applied. It is possible to either modify the turn-off time of 60 sec. or completely deactivate the “Power Save Mode” via the DSP PC-Tool software.


Start-Stop capability

The switched power supply of the Helix DSP.2 assures a constant internal supply voltage even if the battery’s voltage drops to 6 Volts during engine crank.


Automatic Digital Signal Detection

Switching from analog input to the digital input is done automatically as soon as a signal is detected on the Optical Input. This feature can be deactivated in the DSP PC-Tool software. Alternatively, you can use an optional remote control for manual switching between analog and digital inputs.

Ad information

Product highlights:

  • Extremely powerful “fixed point” Audio DSP with 64 Bit resolution and 1.2 billion MAC operations per second
  • HELIX Extension Card slot (HEC) for additional input/output modules like Bluetooth Audio Streaming, High-Resolution Audio Streaming via USB etc.
  • Smart high-level input with ADEP circuit (Advanced Diagnostics Error Protection)
  • Start-Stop capability down to 6V supply voltage
  • Freely definable signal routing with separate matrices for line, SPDIF and HEC/AUX
  • Time alignment with up to 20 ms delay time per channel, additionally reverse time alignment for in-phase summation of the inputs
  • Optimized signal path and power supply for further improved sound quality
  • “Ground lift” switch to avoid ground loops
  • Control input for connecting remote controls and accessories
  • Inputs: 6 x RCA/Cinch, 6 x High-level and 1 x optical SPDIF
  • Outputs: 8 x RCA/Cinch with max. 6 Volts output voltage
  • Easy configuration thanks to the professional and user-friendly DSP PC-Tool Version 4 software


Smart high-level input

The latest generation of OE car radios incorporates sophisticated possibilities of diagnosing the connected speakers. If a common signal processor will be hooked up failure messages and loss of specific features (e.g. fader function) quite often appears – but not with the DSP.2.

The new ADEP circuit (Advanced Diagnostics Error Protection) avoids all these problems without loading the speaker outputs of the OE radio during high volumes unnecessarily.


Power Save Mode

The Power Save Mode is incorporated in the basic setup. It allows to significantly reduce the power consumption of the amplifiers that are connected to the Helix DSP.2 once there’s no input signal present for more than 60 seconds. Please note that in many up-to-date cars with “CAN” or any other internal bus structures it may happen that the radio remains “invisibly” turned on for up to 45 min. even after locking and leaving the car! Once the “Power Save Mode“ is active the remote output and therefore the connected amplifiers will be turned off. The Helix DSP.2 will reactivate the remote output within a second if a music signal is applied. It is possible to either modify the turn-off time of 60 sec. or completely deactivate the “Power Save Mode” via the DSP PC-Tool software.


Start-Stop capability

The switched power supply of the Helix DSP.2 assures a constant internal supply voltage even if the battery’s voltage drops to 6 Volts during engine crank.


Automatic Digital Signal Detection

Switching from analog input to the digital input is done automatically as soon as a signal is detected on the Optical Input. This feature can be deactivated in the DSP PC-Tool software. Alternatively, you can use an optional remote control for manual switching between analog and digital inputs.

Merchant information

25 Kaki Bukit Road 4 #01-27Synergy @ KB S(417800)
9am - 7pm (Mon - Sun & PHs)
87988081 / 67021557

Email Enquiry

This enquiry will be sent directly to the seller.
* indicates compulsory field.
×