Jump to content

SOLD
 
Morel Maximo Ultra 602 MKII Component Speakers (With Morel Maximo Ultra Coax 602 MKII Coaxial Speakers & MPS 4.400 4-Channel Amplifier)
-
Condition
Brand New
Suitable For
All Models
Posted on: 14 Jun 2023 | Updated on : 11 Jul 2023

Merchant information

81 Ubi Avenue 4 #01-10 UB. One S(408830)
9.30am - 7.30pm (Mon - Sat)
64440123
81388731

Ad information

1635140885.jpg

Package Inclusive of:

  • Morel Maximo Ultra 602 MKII
  • Morel Maximo Ultra Coax 602 MKII
  • Morel MPS 4.400 4 Channel Amplifier

Call to enquire now!

Morel Maximo Ultra 602 MKII

Specifications:

  • 6-1/2" 2-Way Component Speaker System
  • Power Handling:
  • Peak: 360 watts per pair / 180 watts each
  • RMS: 200 watts per pair / 100 watts each
  • Impedance: 4 Ohm
  • Sensitivity: 90.5 dB
  • Frequency Response: 50Hz - 20,000Hz
  • Treated Paper Composite Cone
  • High Grade Ferrite Magnets
  • External Voice Coil Technology (EVC)
  • Mounting Depth: 63mm (2.5")
  • 1" Soft Dome Tweeters
  • Neodymium Magnet
  • MXR Direct Crossovers
  • Includes Grilles

Morel Maximo Ultra Coax 602 MKII

Specifications:

  • 6-1/2" 2-Way Coaxial Speakers
  • Power Handling:
  • Peak: 320 watts per pair / 160 watts each
  • RMS: 180 watts per pair / 90 watts each
  • Impedance: 4 Ohm •Sensitivity: 91 dB
  • Frequency Response: 55Hz - 20,000 Hz
  • Treated Paper Composite Paper Cone
  • High Grade Ferrite Magnet
  • 1" Soft Dome Tweeter
  • Built-in MXR Crossover
  • Mounting Depth: 63mm (2.5")
  • Includes Grilles

Morel MPS 4.400 4 Channel Amplifier

Specifications:

  • 4-channel car amplifier
  • 70 watts RMS x 4 at 4 ohms (100 watts RMS x 4 at 2 ohms)
  • 200 watts RMS x 2 at 4 ohms in bridged mode (4-ohm stable in bridged mode)
  • Class AB amp technology

-100 dB signal-to-noise ratio, 0.05% distortion

  • Variable high- and low-pass filters (40-400 Hz, 12 dB/octave) on front and rear channels
  • Preamp and speaker-level inputs

-Speaker-level inputs require speaker wire to RCA adapters

-Speaker-level inputs feature DC offset or signal sensing turn-on

  • Wiring, fuse, and hardware not included with amplifier

-8-gauge power and ground wires and a 40-amp fuse recommended

  • 13-5/16"W (including flange) x 2-1/8"H x 6-3/4"D


Contact (Whatsapp): 81388731
Facebook: https://www.facebook.com/AudioSolutionPteLtd/

 
1564380951.jpg

Ad information

1635140885.jpg

Package Inclusive of:

  • Morel Maximo Ultra 602 MKII
  • Morel Maximo Ultra Coax 602 MKII
  • Morel MPS 4.400 4 Channel Amplifier

Call to enquire now!

Morel Maximo Ultra 602 MKII

Specifications:

  • 6-1/2" 2-Way Component Speaker System
  • Power Handling:
  • Peak: 360 watts per pair / 180 watts each
  • RMS: 200 watts per pair / 100 watts each
  • Impedance: 4 Ohm
  • Sensitivity: 90.5 dB
  • Frequency Response: 50Hz - 20,000Hz
  • Treated Paper Composite Cone
  • High Grade Ferrite Magnets
  • External Voice Coil Technology (EVC)
  • Mounting Depth: 63mm (2.5")
  • 1" Soft Dome Tweeters
  • Neodymium Magnet
  • MXR Direct Crossovers
  • Includes Grilles

Morel Maximo Ultra Coax 602 MKII

Specifications:

  • 6-1/2" 2-Way Coaxial Speakers
  • Power Handling:
  • Peak: 320 watts per pair / 160 watts each
  • RMS: 180 watts per pair / 90 watts each
  • Impedance: 4 Ohm •Sensitivity: 91 dB
  • Frequency Response: 55Hz - 20,000 Hz
  • Treated Paper Composite Paper Cone
  • High Grade Ferrite Magnet
  • 1" Soft Dome Tweeter
  • Built-in MXR Crossover
  • Mounting Depth: 63mm (2.5")
  • Includes Grilles

Morel MPS 4.400 4 Channel Amplifier

Specifications:

  • 4-channel car amplifier
  • 70 watts RMS x 4 at 4 ohms (100 watts RMS x 4 at 2 ohms)
  • 200 watts RMS x 2 at 4 ohms in bridged mode (4-ohm stable in bridged mode)
  • Class AB amp technology

-100 dB signal-to-noise ratio, 0.05% distortion

  • Variable high- and low-pass filters (40-400 Hz, 12 dB/octave) on front and rear channels
  • Preamp and speaker-level inputs

-Speaker-level inputs require speaker wire to RCA adapters

-Speaker-level inputs feature DC offset or signal sensing turn-on

  • Wiring, fuse, and hardware not included with amplifier

-8-gauge power and ground wires and a 40-amp fuse recommended

  • 13-5/16"W (including flange) x 2-1/8"H x 6-3/4"D


Merchant information

81 Ubi Avenue 4 #01-10UB. One S(408830)
9.30am - 7.30pm (Mon - Sat)
64440123 / 81388731
Posted on: 14 Jun 2023 | Updated on : 11 Jul 2023

Features & specs

The Morel Maximo is an opportunity to discover the sound Morel is famous for without breaking the budget. Engineered to easily integrate with most factory head units or be powered with a small amplifier, the Maximo series will elevate any audio system to a new performance level.

 

Features

  • 6.5" Maximo Series 2-Way Component System
  • Power Handling:

    Peak: 360 watts per set / 180 watts each side

    RMS: 180 watts per set / 90 watts each side

  • Acudamp Polymer-Coated cone material
  • Rubber speaker surround
  • 1" Soft Dome tweeter with EVC technology
  • High-temperature 1" Copper voice coil
  • High-grade Ferrite magnet motor structure
  • External crossover filter protects tweeter from damaging frequencies
  • 4 ohms impedance
  • Frequency response: 50-20,000 Hz
  • Top-mount depth: 2-1/2"
  • Sensitivity: 90.5dB

Specifications

  • Nominal Impedance 4 Ohm
  • Power Handling 90W
  • Max. Transient Power Handling 180W
  • Sensitivity (2.83V/1M) 90.5dB
  • Frequency Response 50-20,000Hz
  • Crossover Point 3800Hz 6dB/octave
  • Voice Coil Diameter

    Woofer: 25mm (1")

    Tweeter: 25mm (1") 

  • Voice Coil Wire Copper 
  • Magnet System

    Woofer: High grade ferrite magnet

  • High grade ferrite magnet
  • Tweeter: Neodymium
  • Mounting Depth 63mm (2.5")
Consumer Reviews
N/A
There is no consumer review available. Be the first to Rate it !

Similar Items

Related Searches : Component Speakers , Coaxial Speakers

Email Enquiry

This enquiry will be sent directly to the seller.
* indicates compulsory field.
×
×
  • Create New...