Jump to content

 
3M Silicone Lubricant - Dry Type (08897)
$9 Cash & Carry
Condition
Brand New
Suitable For
All Models
Posted on: 11 Jan 2020 | Updated on : 11 Jan 2020 | 3 views

Merchant information

18 Boon Lay Way #04-109 TradeHub 21 S(609966)
9.30am - 6pm (Mon - Fri) 9.30am - 2pm (Sat) Closed on Sun & PHs
65159282
82288858

Ad information

3M Silicone Lubricant eliminates rubber squeaks, prevents sticking and seals out moisture. Our lubricant contains no petroleum oils to stain fabrics. Formulated for extreme conditions, it will not freeze at -28°F nor degrade at 350°F. Silicone lubricant is available in both wet and dry formulas.

 

Directions for Use:

  1. Turn spray tip so opening points to dot on rim of can.
  2. Hold can upright and push actuator on top of can all the way down to apply a uniform spray. Position the actuator away from your face before spraying.
  3. If using the extension tube, insert it in to the actuator using a twisting motion.
  4. Best results are obtained when material is at room temperature. Higher temperatures increase the pressure in the can, and lower temperatures reduce the pressure.
  5. Hold can 8" to 10" from surface to be sprayed. Apply evenly and use sparingly.
  6. For hard to reach or small surfaces, use the extension tube.
  7. On rubber, leather, and vinyl; apply and wipe with a cloth.

Call us now to know more!
 
Website:

Facebook: 
Distributor: 3M Authorized Distributor Windows Films & Automotive Aftermarket Products, RaceChip Chiptuning, Hummer Jump Starter, Layered Sound USA, T.M Works Japan. 

Ad information

3M Silicone Lubricant eliminates rubber squeaks, prevents sticking and seals out moisture. Our lubricant contains no petroleum oils to stain fabrics. Formulated for extreme conditions, it will not freeze at -28°F nor degrade at 350°F. Silicone lubricant is available in both wet and dry formulas.

 

Directions for Use:

  1. Turn spray tip so opening points to dot on rim of can.
  2. Hold can upright and push actuator on top of can all the way down to apply a uniform spray. Position the actuator away from your face before spraying.
  3. If using the extension tube, insert it in to the actuator using a twisting motion.
  4. Best results are obtained when material is at room temperature. Higher temperatures increase the pressure in the can, and lower temperatures reduce the pressure.
  5. Hold can 8" to 10" from surface to be sprayed. Apply evenly and use sparingly.
  6. For hard to reach or small surfaces, use the extension tube.
  7. On rubber, leather, and vinyl; apply and wipe with a cloth.

Merchant information

18 Boon Lay Way #04-109TradeHub 21 S(609966)
9.30am - 6pm (Mon - Fri) 9.30am - 2pm (Sat) Closed on Sun & PHs
65159282 / 82288858

Email Enquiry

This enquiry will be sent directly to the seller.
* indicates compulsory field.
×