Jump to content

 
Liqui Moly Jet Clean Tronic Diesel Vehicle Servicing With Throttle Body Wash Package
$180
Condition
Brand New
Suitable For
All Models
Posted on: 22 Mar 2024 | Updated on : 22 Mar 2024

Merchant information

155 Kaki Bukit Avenue 1 #01-00 Shun Li Industrial Park S(416012)
10am - 7pm (Mon - Fri) 10am - 3pm (Sat)
92376217
68442814

Ad information

$180 now comes with free throttle body wash!


Jet Clean Tronic is a device for cleaning all diesel injection systems, as well as gasoline engines. Deposits that build up on the elements of injection systems and combustion chamber are a common cause of irregular engine, increased fuel consumption and emissions of harmful substances more in the exhaust. Another symptom of the contaminated injection system is also often a large smoke especially when rapid engine load (eg overtaking).


In addition, gas-powered engines after a long operation in the fuel, there are often problems with the engine on gasoline is due to accumulation of large amounts of pollutants to the injectors, also in many types of gas installations after switching on the "gas" is cut off the fuel supply to the injectors, and this, in turn, causes the "browning" of injectors. The gasoline engine can also clean the intake and intake of particulate matter from the filter inside the injector. Cleaning the intake manifold is particularly important in vehicles that are operated mainly in city traffic.


Petrol engine:

dissolution of deposits in fuel injectors and "rail" injection - is an automatic cleaning cycle, which lasts 8 minutes

cleaning the injection system and combustion chamber, the inlet valve - this cycle lasts from 20 to 40 minutes depending on the degree of contamination of components of the injection system, the engine is of special cleaning agents.

sucking pollutants mesh injector - automatic cycle takes 90 seconds for each 4 injectors

cleaning the intake manifold - this cycle lasts from 15 to 35 minutes depending on the degree of contamination of the intake manifold, the engine during this process runs on petrol and also lead to the intake manifold vacuum is given cleaner.

Diesel engine:


clean the injection system and the combustion chamber, the process takes about 35 minutes, the engine should be at this time to work on cleaning fluid, while cleaning the injection system will be cleared:

cleaning of the injection pump

cleaning injectors

Cleaning of the combustion chamber

cleaning turbines with variable geometry VTG

cleaning the intake manifold

cleaning the DPF particulate filter



Info directly from Liqui Moly's main web.

https://www.liqui-moly.com/



Operating hours 3pm - 3am!

Call us now or visit our website for more details!
 
Website: http://www.eclipseauto.com.sg/
 
1429673788.jpg

Ad information

$180 now comes with free throttle body wash!


Jet Clean Tronic is a device for cleaning all diesel injection systems, as well as gasoline engines. Deposits that build up on the elements of injection systems and combustion chamber are a common cause of irregular engine, increased fuel consumption and emissions of harmful substances more in the exhaust. Another symptom of the contaminated injection system is also often a large smoke especially when rapid engine load (eg overtaking).


In addition, gas-powered engines after a long operation in the fuel, there are often problems with the engine on gasoline is due to accumulation of large amounts of pollutants to the injectors, also in many types of gas installations after switching on the "gas" is cut off the fuel supply to the injectors, and this, in turn, causes the "browning" of injectors. The gasoline engine can also clean the intake and intake of particulate matter from the filter inside the injector. Cleaning the intake manifold is particularly important in vehicles that are operated mainly in city traffic.


Petrol engine:

dissolution of deposits in fuel injectors and "rail" injection - is an automatic cleaning cycle, which lasts 8 minutes

cleaning the injection system and combustion chamber, the inlet valve - this cycle lasts from 20 to 40 minutes depending on the degree of contamination of components of the injection system, the engine is of special cleaning agents.

sucking pollutants mesh injector - automatic cycle takes 90 seconds for each 4 injectors

cleaning the intake manifold - this cycle lasts from 15 to 35 minutes depending on the degree of contamination of the intake manifold, the engine during this process runs on petrol and also lead to the intake manifold vacuum is given cleaner.

Diesel engine:


clean the injection system and the combustion chamber, the process takes about 35 minutes, the engine should be at this time to work on cleaning fluid, while cleaning the injection system will be cleared:

cleaning of the injection pump

cleaning injectors

Cleaning of the combustion chamber

cleaning turbines with variable geometry VTG

cleaning the intake manifold

cleaning the DPF particulate filter



Info directly from Liqui Moly's main web.

https://www.liqui-moly.com/



Operating hours 3pm - 3am!

Merchant information

155 Kaki Bukit Avenue 1 #01-00 Shun Li Industrial Park S(416012)
10am - 7pm (Mon - Fri) 10am - 3pm (Sat)
92376217 / 68442814
Posted on: 22 Mar 2024 | Updated on : 22 Mar 2024

Features & specs

Injection Cleaner is a highly effective combination of active agents for cleaning and protection. This product is formulated in accordance with the latest standard of fuel and additive technology and meets the requirements of today's engines, fuels and running conditions. Suitable for all gasoline fuel injection systems such as K, KE and L-Jetronic systems, etc.

 

 

Benefits:

  • Cleans the injection system
  • Cost-effective due to exact dosage
  • Guarantees low fuel consumption
  • Optimum dosage
  • Reduces pollutant emissions removes carbon deposits from the intake valves and in the combustion chamber
  • Tested for turbochargers and catalytic converters

Areas Of Application:

 

For rectifying problems such as difficulties with starting, irregular idling, poor throttle response, performance losses, surges due to lean mixture and poor exhaust values caused by contaminated injection systems. Repeat treatment if problems reoccur. Suitable for all gasoline injection systems.

Consumer Reviews
Used on a Honda Civic. Can feel better engine performance and also fuel efficiency. A good additive to have - Sean, Owner of Honda Civic SJH20--J
Reviewed by Mobile Reviewer
Smoother engine sound. More responsive. Fuel consumption has slightly improved. Will observe longer to see if there is any significant sign. - Tan, Owner of Toyota Vios SFK38--U
Reviewed by Mobile Reviewer

Similar Items

Related Searches : Vehicle Servicing

Email Enquiry

This enquiry will be sent directly to the seller.
* indicates compulsory field.
×
×
  • Create New...