Jump to content

 
Audison Prima AP8.9 bit 8-Ch Amplifier (With Built-In 9-Ch Processor)
$1,250
Condition
Brand New
Suitable For
All Models
Posted on: 09 Mar 2024 | Updated on : 09 Mar 2024

Merchant information

50 Serangoon North Avenue 4 #01-18 First Centre S(555856)
10am - 8pm (Mon - Sat) 11am - 4pm (Sun & PHs)
97459950
65701138

Ad information

BRAND NEW

SELLING @ $1550 with Installation


The AP8.9 bit amplifier was designed by Audison R&D Department to achieve maximum sound quality in OEM Integration applications.

The powerful management software proves the ability to acquire the bit Drive presets which the Audison team fine-tuned specifically for your car. Thanks to the innovative power supply stage, a power of 520 W total can be achieved in an extremely compact case.

The non-amplifiable ninth channel can be used to drive a subwoofer via the mono AP1 D amplifier


POWER SUPPLY

  • Voltage: 7.5 ÷ 15 VDC
  • Idling current: 1.5 A
  • Switched off: <0.04 mA
  • Consumption @ 14.4 VDC 2Ω Max Musical Power (without CPL): 30 A
  • Remote IN 7 ÷ 15 VDC (1 mA)
  • Remote OUT 11 ÷ 15 VDC (200 mA)
  • Fuse 30 A
  • ART (Automatic Remote Turn on/off) Speakers to input - selectable
  • AST (Automatic Signal Turn on/off) Pre-In to input - selectable
  • CPL (Continuous Power Limiting) Max continuous power - selectable

AMPLIFIER STAGE

  • Distortion - THD (1kHz @ 4Ω, 90% Power): 0.05 %
  • Bandwidth (-3 dB, 2 V RMS, 4Ω): 10 ÷ 22k Hz
  • S/N ratio @ A weighted, 1V, Max Power: 95 dBA
  • Damping factor @ 1 kHz, 2 V RMS, 4Ω: >70
  • Input sensitivity: 2 ÷ 15 V RMS
  • Input impedance: 15k Ω
  • LOAD IMPEDANCE (MIN):
    • 8 Ch: 2Ω
    • 4 Ch - Bridge (1-2) (3-4) (5-6) (7-8): 4Ω
  • OUTPUT POWER (RMS) @ 12.0 ÷ 14.4 VDC, 1% THD:
    • 8 Ch @ 4Ω: 35 W x 8
    • 8 Ch @ 2Ω: 65 W x 8
    • 4 Ch - (Bridge 1/2; 3/4; 5/6; 7/8) @ 4Ω: 130 W x 4
  • OUTPUT POWER (RMS) @ 14.4 VDC, 10% THD:
    • 8 Ch @ 4Ω: 45 W x 8
    • 8 Ch @ 2Ω: 85 W x 8
    • 4 Ch - (Bridge 1/2; 3/4; 5/6; 7/8) @ 4Ω: 170 W x 4

CEA SPECIFICATIONS

  • Output power @ 4Ω, ⩽1% THD+N, 14.4 V: 35 W x 8 Ch
  • SN ratio (ref. 1 W output): 85 dBA

SIGNAL CONNECTIONS

  • Sub Out (RCA Pre-Out): 0 ÷ 4 V RMS Max
  • Input Stage:
    • Config 1: Hi / Lo level FL-FR-RL-RR + N.2 customizable
    • Config 2: Hi / Lo level FL-FR-RL-RR + Stereo Aux In (DRC select.)
    • Optical IN (max 96 kHz/24 bit): S/P-DIF PCM 96 kHz/24 bit max

DIGITAL SIGNAL PROCESSOR (32 bit Cirrus Logic; Clock speed: 147 MHz)

  • Crossover: Full / Hi Pass / Lo Pass / Band Pass
  • Crossover type and slope: Linkwitz @ 12/24 dB - Butterworth @ 6/12/18/24 dB
  • Crossover Frequency: 68 steps @ 20 ÷ 20k Hz
  • Phase inversion: 0° / 180°
  • Analog Input Equalizer: Automatic De-Equalization
  • Output Equalizer: N.9 Parametrics Equalizers: ±12 dB;10 pole; 20 ÷ 20k Hz
  • Time Alignment Distance: 0 ÷ 510 cm / 0 ÷ 200.8 in.
  • Time Alignment Delay: 0 ÷ 15 ms
  • Time Alignment Step: 0,08 ms; 2,8 cm / 1.1 in.
  • Time Alignment Fine Set: 0,02 ms; 0,7 cm / 0.27 in.
  • SYSTEM SET: Preset (Drive Preset): Rotary switch for 7 installation Presets
  • Acoustic Preset: N.2 DSP Memory, DRC selectable

CONTROL CONNECTIONS

  • From / to personal computer: 1 x micro USB-B
  • To Audison Electronics: DRC controls
  • ASP: Automatic Speaker Presence
  • Optical / AUX select: 12V control for Optical In / AUX enable
  • Master enable: 12V control for Master In enable

GENERAL REQUIREMENTS

  • PC connections: Micro USB (1.1 / 2.0 / 3.0)
  • Software/PC requirements: Microsoft Windows (32/64 bit): XP, Vista, Windows 7, Windows 8
  • Graphic card min. resolution: 800 x 600
  • Ambient operating temperature range: 0 °C to 55 °C (32°F to 131°F)
Call now for enquiries or drop by our shop @ First Centre(Serangoon)!
 
Contact: 65701138 
 
50 Serangoon North Avenue 4
#01-18
First Centre
S(555856)
 
Monday to Saturday: 10am - 8pm
Sunday and PHs: 11am - 4pm
 

Ad information

BRAND NEW

SELLING @ $1550 with Installation


The AP8.9 bit amplifier was designed by Audison R&D Department to achieve maximum sound quality in OEM Integration applications.

The powerful management software proves the ability to acquire the bit Drive presets which the Audison team fine-tuned specifically for your car. Thanks to the innovative power supply stage, a power of 520 W total can be achieved in an extremely compact case.

The non-amplifiable ninth channel can be used to drive a subwoofer via the mono AP1 D amplifier


POWER SUPPLY

  • Voltage: 7.5 ÷ 15 VDC
  • Idling current: 1.5 A
  • Switched off: <0.04 mA
  • Consumption @ 14.4 VDC 2Ω Max Musical Power (without CPL): 30 A
  • Remote IN 7 ÷ 15 VDC (1 mA)
  • Remote OUT 11 ÷ 15 VDC (200 mA)
  • Fuse 30 A
  • ART (Automatic Remote Turn on/off) Speakers to input - selectable
  • AST (Automatic Signal Turn on/off) Pre-In to input - selectable
  • CPL (Continuous Power Limiting) Max continuous power - selectable

AMPLIFIER STAGE

  • Distortion - THD (1kHz @ 4Ω, 90% Power): 0.05 %
  • Bandwidth (-3 dB, 2 V RMS, 4Ω): 10 ÷ 22k Hz
  • S/N ratio @ A weighted, 1V, Max Power: 95 dBA
  • Damping factor @ 1 kHz, 2 V RMS, 4Ω: >70
  • Input sensitivity: 2 ÷ 15 V RMS
  • Input impedance: 15k Ω
  • LOAD IMPEDANCE (MIN):
    • 8 Ch: 2Ω
    • 4 Ch - Bridge (1-2) (3-4) (5-6) (7-8): 4Ω
  • OUTPUT POWER (RMS) @ 12.0 ÷ 14.4 VDC, 1% THD:
    • 8 Ch @ 4Ω: 35 W x 8
    • 8 Ch @ 2Ω: 65 W x 8
    • 4 Ch - (Bridge 1/2; 3/4; 5/6; 7/8) @ 4Ω: 130 W x 4
  • OUTPUT POWER (RMS) @ 14.4 VDC, 10% THD:
    • 8 Ch @ 4Ω: 45 W x 8
    • 8 Ch @ 2Ω: 85 W x 8
    • 4 Ch - (Bridge 1/2; 3/4; 5/6; 7/8) @ 4Ω: 170 W x 4

CEA SPECIFICATIONS

  • Output power @ 4Ω, ⩽1% THD+N, 14.4 V: 35 W x 8 Ch
  • SN ratio (ref. 1 W output): 85 dBA

SIGNAL CONNECTIONS

  • Sub Out (RCA Pre-Out): 0 ÷ 4 V RMS Max
  • Input Stage:
    • Config 1: Hi / Lo level FL-FR-RL-RR + N.2 customizable
    • Config 2: Hi / Lo level FL-FR-RL-RR + Stereo Aux In (DRC select.)
    • Optical IN (max 96 kHz/24 bit): S/P-DIF PCM 96 kHz/24 bit max

DIGITAL SIGNAL PROCESSOR (32 bit Cirrus Logic; Clock speed: 147 MHz)

  • Crossover: Full / Hi Pass / Lo Pass / Band Pass
  • Crossover type and slope: Linkwitz @ 12/24 dB - Butterworth @ 6/12/18/24 dB
  • Crossover Frequency: 68 steps @ 20 ÷ 20k Hz
  • Phase inversion: 0° / 180°
  • Analog Input Equalizer: Automatic De-Equalization
  • Output Equalizer: N.9 Parametrics Equalizers: ±12 dB;10 pole; 20 ÷ 20k Hz
  • Time Alignment Distance: 0 ÷ 510 cm / 0 ÷ 200.8 in.
  • Time Alignment Delay: 0 ÷ 15 ms
  • Time Alignment Step: 0,08 ms; 2,8 cm / 1.1 in.
  • Time Alignment Fine Set: 0,02 ms; 0,7 cm / 0.27 in.
  • SYSTEM SET: Preset (Drive Preset): Rotary switch for 7 installation Presets
  • Acoustic Preset: N.2 DSP Memory, DRC selectable

CONTROL CONNECTIONS

  • From / to personal computer: 1 x micro USB-B
  • To Audison Electronics: DRC controls
  • ASP: Automatic Speaker Presence
  • Optical / AUX select: 12V control for Optical In / AUX enable
  • Master enable: 12V control for Master In enable

GENERAL REQUIREMENTS

  • PC connections: Micro USB (1.1 / 2.0 / 3.0)
  • Software/PC requirements: Microsoft Windows (32/64 bit): XP, Vista, Windows 7, Windows 8
  • Graphic card min. resolution: 800 x 600
  • Ambient operating temperature range: 0 °C to 55 °C (32°F to 131°F)

Merchant information

50 Serangoon North Avenue 4 #01-18First Centre S(555856)
10am - 8pm (Mon - Sat) 11am - 4pm (Sun & PHs)
97459950 / 65701138
Posted on: 09 Mar 2024 | Updated on : 09 Mar 2024

Features & specs

The AP8.9 bit amplifier was designed by Audison R&D Department to achieve maximum sound quality in OEM Integration applications. The powerful management software proves the ability to acquire the bit Drive presets which the Audison team fine-tuned specifically for your car. Thanks to the innovative power supply stage, a power of 480 W total can be achieved in an extremely compact case . The non-amplifiable ninth channel can be used to drive a subwoofer via the mono AP1 D amplifier.

 

Load Imp.

8 Channels

4 Channels (Bridge)

4 Ohm

35 W x 8

130 W x 4

2 Ohm

65 W x 8

 

Consumer Reviews
Been a while from ICE. Only recently stumble across this little gems. I could drive front and rear speaker actively and have installer tune for me. It can either do 8ch or combine any of the 2ch into bridge mode for higher power drive. Very flexible config. With main input, one aux and one optical in direct to the amp. IF you know what you want it can perform extremely well. (digital domain). There's also sub out (line level) which I could utilized in the future.
Reviewed by Mavwong 
I purchased the AP 8.9 to enhance my system sound but it is not performing any better than the original rcd 510 that came with the car, it got so many abilities and settings that its wonderful but still after lots of hours the sound isn't better, i have it for six months and the wired remote stopped working after 5 months and now the pc interface stopped working, so i am stuck with one setting and no ability to change between sources, i expected more from Audison at this price level.
Reviewed by shterling 

Similar Items

Related Searches : Multi-channel Amplifier

Email Enquiry

This enquiry will be sent directly to the seller.
* indicates compulsory field.
×
×
  • Create New...