Jump to content

 
Brax GX2000 2-Channel Amplifier
$4,100 Cash & Carry
Condition
Brand New
Suitable For
All Models
Posted on: 01 Nov 2022 | Updated on : 01 Nov 2022

Merchant information

1 Kaki Bukit Avenue 6 #01-92 Autobay @ Kaki Bukit S(417883)
10am - 8pm (Mon - Sat)
93633663

Ad information

Features

  • Low internal resistance due to solid gold-plated terminals for power cables up to 50 mm²/ gauge 1 and speaker cables up to 6 mm²/ gauge 6
  • Separate terminal to connect a BRAX IPC directly to the switching transistors
  • Signal inputs with high-end signal capacitors for a perfect and pure sound quality
  • Each amplifier is available in black or silver finish either with a short or extended heatsink
  • Especially developed transformers with high-efficient core materials guarantee a total output power of more than 1,000 Watts
  • Solid heatsink made of special aluminium alloy for a perfect cooling of the transistors in the power supply and output stage
  • 32 hand-selected high-end MOSFET transistors for brilliant sound
  • The level controls for the input sensitivity adjustment are placed under the name plate, thus the amplifier has a clean and puristic design
  • Adjustment range 1.0 V to 8.0 V
  • Handcrafted in Germany

Technical data

  • Output power RMS:

- @ 4 Ohms: 2 x 290 Watts
- @ 2 Ohms: 2 x 530 Watts
- @ 1 Ohm: - 
- bridged @ 4 Ohms: 1 x 1,060 Watts
- bridged @ 2 Ohms: - 

  • Amplifier technology: Class AB
  • Inputs:

2 x Cinch
1 x Remote In

  • Input sensitivity: RCA / Cinch 1.0 - 8.0 Volts
  • Input impedance RCA / Cinch: 10 kOhms
  • Input impedance highlevel: - 
  • Outputs: 2 x Speaker output
  • Output voltage RCA / Cinch: - 
  • Signal converter for digital input: - 
  • Frequency response: 10 Hz - 80 kHz
  • Bass boost: - 
  • Highpass: - 
  • Lowpass: - 
  • Bandpass: - 
  • Subsonic: - 
  • Phase: - 
  • Slope high- / lowpass: - 
  • Slope subsonic / lowpass: - 
  • Signal-to-noise ratio digital input: - 
  • Signal-to-noise ratio analog input: > 120 dB (A-weighted)
  • Distortion (THD): < 0.0009 %
  • Damping factor: > 1000
  • Operating voltage: 9 - 16 Volts (max. 5 sec. down to 6 Volts)
  • Idle current: 3.5 A
  • Fuse: 4 x 30 A LP-Mini-fuse (APS)
  • Additional features: Colour Protection System, BRAX Power Stabilizer connector, Start-Stop capability
  • Dimensions (H x W x D):

Heatsink „Short“: 53 x 237.5 x 433 mm / 2.09 x 9.35 x 17.05"
Heatsink „Long“: 53 x 237.5 x 473 mm / 2.09 x 9.35 x 18.62"

  • Net weight:

Heatsink „Short“: 8.1 kg
​​​​​​​Heatsink „Long“: 8.5 kg

Ad information

Features

  • Low internal resistance due to solid gold-plated terminals for power cables up to 50 mm²/ gauge 1 and speaker cables up to 6 mm²/ gauge 6
  • Separate terminal to connect a BRAX IPC directly to the switching transistors
  • Signal inputs with high-end signal capacitors for a perfect and pure sound quality
  • Each amplifier is available in black or silver finish either with a short or extended heatsink
  • Especially developed transformers with high-efficient core materials guarantee a total output power of more than 1,000 Watts
  • Solid heatsink made of special aluminium alloy for a perfect cooling of the transistors in the power supply and output stage
  • 32 hand-selected high-end MOSFET transistors for brilliant sound
  • The level controls for the input sensitivity adjustment are placed under the name plate, thus the amplifier has a clean and puristic design
  • Adjustment range 1.0 V to 8.0 V
  • Handcrafted in Germany

Technical data

  • Output power RMS:

- @ 4 Ohms: 2 x 290 Watts
- @ 2 Ohms: 2 x 530 Watts
- @ 1 Ohm: - 
- bridged @ 4 Ohms: 1 x 1,060 Watts
- bridged @ 2 Ohms: - 

  • Amplifier technology: Class AB
  • Inputs:

2 x Cinch
1 x Remote In

  • Input sensitivity: RCA / Cinch 1.0 - 8.0 Volts
  • Input impedance RCA / Cinch: 10 kOhms
  • Input impedance highlevel: - 
  • Outputs: 2 x Speaker output
  • Output voltage RCA / Cinch: - 
  • Signal converter for digital input: - 
  • Frequency response: 10 Hz - 80 kHz
  • Bass boost: - 
  • Highpass: - 
  • Lowpass: - 
  • Bandpass: - 
  • Subsonic: - 
  • Phase: - 
  • Slope high- / lowpass: - 
  • Slope subsonic / lowpass: - 
  • Signal-to-noise ratio digital input: - 
  • Signal-to-noise ratio analog input: > 120 dB (A-weighted)
  • Distortion (THD): < 0.0009 %
  • Damping factor: > 1000
  • Operating voltage: 9 - 16 Volts (max. 5 sec. down to 6 Volts)
  • Idle current: 3.5 A
  • Fuse: 4 x 30 A LP-Mini-fuse (APS)
  • Additional features: Colour Protection System, BRAX Power Stabilizer connector, Start-Stop capability
  • Dimensions (H x W x D):

Heatsink „Short“: 53 x 237.5 x 433 mm / 2.09 x 9.35 x 17.05"
Heatsink „Long“: 53 x 237.5 x 473 mm / 2.09 x 9.35 x 18.62"

  • Net weight:

Heatsink „Short“: 8.1 kg
​​​​​​​Heatsink „Long“: 8.5 kg

Merchant information

1 Kaki Bukit Avenue 6 #01-92Autobay @ Kaki Bukit S(417883)
10am - 8pm (Mon - Sat)
93633663
Posted on: 01 Nov 2022 | Updated on : 01 Nov 2022

Email Enquiry

This enquiry will be sent directly to the seller.
* indicates compulsory field.
×
×
  • Create New...