Jump to content

SOLD
 
Focal ES 165K Component Speakers (With Musway D1S Multi-channel Amplifier and Roadmark 6X8 400W Active Subwoofer)
-
Condition
Brand New
Suitable For
All Models
Posted on: 18 Oct 2021 | Updated on : 18 Nov 2021

Merchant information

81 Ubi Avenue 4 #01-10 UB. One S(408830)
9.30am - 7.30pm (Mon - Sat)
64440123
81388731

Ad information

Focal K2 Power ES 165K

 Inverted dome “M”-shaped tweeter

Tweeter easy to install (supplied with accessories)

1-1/4 (32mm) VC diameter for higher performance

Specifications:

  • Diameter: 6-1/2″ (165mm)
  • Voice coil diameter:1-1/4″ (32mm)
  • Voice coil height: 0-9/16″(15mm)
  • Motor: Magnet
  • Tweeter: TKM (“M” profile aramid fiber inverted dome)
  • Cone: Composite K2 Power “W” sandwich cone
  • Surround: Tuned Mass Damper (TMD)
  • Separated crossover: 6-12/12dB (3.5kHz)
  • Tweeter adjustable level: +3; 0; -3dB/oct
  • Max Power: 200W Nominal power: 100W RMS
  • Sensitivity (2.83V/1m): 90.8dB
  • Frequency response: 60Hz-22kHz
  • Impedance: 4 Ω

Musway D1S - 4 Channel Class-AB Amp with 6 Channel DSP

  • 4 x 25/38Watts RMS @ 4/2 Ohms
  • Input : 4 x High Level, 2 x AUX/RCA
  • Output : 4 x High Level,6x RCA (configurable via DSP)
  • Intelligent Hi-Level Input : EPS (Error Protection System) technology which prevents when connected to an OEM factory radio that no functions are impaired or error messages are written into the vehicle memory
  • Start-Stop Ready : Advanced power amplifier control circuit can eliminate the sound interruption at start and stop
  • Over 50 kinds of plug+play cables which cover around 300 different car models
  • 28-bit DSP main chip supports 10-band EQ, digital crossover and time correction
  • Built-in 4-CH high-performance high-to-low converter, Hi-Fi sound quality, low noise
  • For cars without ACC wire, speaker wire can be used to control the start and stop of machine

Nakamichi NBF618S-II 6×9" Active Aluminum Subwoofer

Specification

  • N-Power: 100W
  • Peak Power: 1000W
  • Distortion(THD): <0.4%
  • Signal To Noise Ratio: >90dB
  • Frequency Response: 20Hz -150Hz
  • Input Sensitivity,High Level: 1.0V
  • Input Sensitivity,Low Level: 300mV
  • Low Pass Flter: 50Hz - 150Hz
  • Bass Boost: 0dB + 12dB
  • Subsonic Filter: 20Hz(Fixed)
  • Fuse Rating: 20A
  • Subwoofer: 6×8 inch,4ohm
  • Unit Dimension (LxWxH): 260x195x72mm

Contact (Whatsapp): 81388731
Facebook: https://www.facebook.com/AudioSolutionPteLtd/

 
1564380951.jpg

Ad information

Focal K2 Power ES 165K

 Inverted dome “M”-shaped tweeter

Tweeter easy to install (supplied with accessories)

1-1/4 (32mm) VC diameter for higher performance

Specifications:

  • Diameter: 6-1/2″ (165mm)
  • Voice coil diameter:1-1/4″ (32mm)
  • Voice coil height: 0-9/16″(15mm)
  • Motor: Magnet
  • Tweeter: TKM (“M” profile aramid fiber inverted dome)
  • Cone: Composite K2 Power “W” sandwich cone
  • Surround: Tuned Mass Damper (TMD)
  • Separated crossover: 6-12/12dB (3.5kHz)
  • Tweeter adjustable level: +3; 0; -3dB/oct
  • Max Power: 200W Nominal power: 100W RMS
  • Sensitivity (2.83V/1m): 90.8dB
  • Frequency response: 60Hz-22kHz
  • Impedance: 4 Ω

Musway D1S - 4 Channel Class-AB Amp with 6 Channel DSP

  • 4 x 25/38Watts RMS @ 4/2 Ohms
  • Input : 4 x High Level, 2 x AUX/RCA
  • Output : 4 x High Level,6x RCA (configurable via DSP)
  • Intelligent Hi-Level Input : EPS (Error Protection System) technology which prevents when connected to an OEM factory radio that no functions are impaired or error messages are written into the vehicle memory
  • Start-Stop Ready : Advanced power amplifier control circuit can eliminate the sound interruption at start and stop
  • Over 50 kinds of plug+play cables which cover around 300 different car models
  • 28-bit DSP main chip supports 10-band EQ, digital crossover and time correction
  • Built-in 4-CH high-performance high-to-low converter, Hi-Fi sound quality, low noise
  • For cars without ACC wire, speaker wire can be used to control the start and stop of machine

Nakamichi NBF618S-II 6×9" Active Aluminum Subwoofer

Specification

  • N-Power: 100W
  • Peak Power: 1000W
  • Distortion(THD): <0.4%
  • Signal To Noise Ratio: >90dB
  • Frequency Response: 20Hz -150Hz
  • Input Sensitivity,High Level: 1.0V
  • Input Sensitivity,Low Level: 300mV
  • Low Pass Flter: 50Hz - 150Hz
  • Bass Boost: 0dB + 12dB
  • Subsonic Filter: 20Hz(Fixed)
  • Fuse Rating: 20A
  • Subwoofer: 6×8 inch,4ohm
  • Unit Dimension (LxWxH): 260x195x72mm

Merchant information

81 Ubi Avenue 4 #01-10UB. One S(408830)
9.30am - 7.30pm (Mon - Sat)
64440123 / 81388731
Posted on: 18 Oct 2021 | Updated on : 18 Nov 2021

Similar Items

Email Enquiry

This enquiry will be sent directly to the seller.
* indicates compulsory field.
×
×
  • Create New...