Jump to content

 
Morel MPS Multi-channel Amplifier
$698 – $1,498
Condition
Brand New
Suitable For
All Models
Posted on: 28 Mar 2024 | Updated on : 28 Mar 2024

Merchant information

Blk 5068 Ang Mo Kio Industrial Park 2 #01-1467/1469 S(569571)
9am - 6pm (Mon - Sat)
92286969
92216969

Ad information

Accurate Design and High-Level Components

The MPS amplifiers were developed with proper, audiophile-grade components to ensure the highest-level performance.

  • The MPS incorporate fully balanced differential inputs that provide superior noise rejection and can endure up to 20 volts of signal input, allowing even factory speaker-level signal to be accepted through the RCA connections.
  • High fidelity Texas Instruments OP amps and ultra-low tolerance surface mount components keep the integrity of the audio signal as pure as possible.
  • Protection and thermal management are managed via an onboard microprocessor, allowing our engineers to design the amplifier without the need for internal fuses that can impede power delivery to the power supply.

Innovation is at the heart of every Morel product

The new Morel Performance Series amplifiers were developed with the same passion and product philosophy that lead Morel over the past 45 years.  The company’s R&D team worked diligently to engineer the MPS series so they provide a fine balance of built quality, sonic performance and affordability.

As a high fidelity speaker manufacturer, Morel thoroughly recognizes how poorly designed amplifiers and electronics can ruin the performance potential of a speaker system. With this in mind, the engineering directive for the MPS amplifiers was simple— produce a series of amplifiers to be exceptionally musical and dynamic, with clean, uncolored power that can drive speakers to their full sonic potential.

Accurate Design and High-Level Components

With installers in mind, our new amplifiers provide a unique feature set and installation-friendly design. Each model uses a single-sided circuit layout with all connections on one side of the amplifier, making installation simple and clean.  Preamp tuning and setting options are located discretely under a removable panel at the top of the amplifier.

Each amplifier is also devised to integrate with OEM audio systems directly through the RCA input with an adaptive connector, and auto turn-on via signal sensing or DC turn-off sensing—features usually found in much more expensive amplifiers.

Our choice of mono, four-channel and five-channel amplifier configurations ensure that the MPS amplifiers will cover almost every sound system design.  We also provide a two-year warranty for the MPS amplifiers when installed by an authorized Morel dealer.

The MPS amplifiers set new sonic boundaries for affordable amplifiers and a unique feature set that places them at the top of their game.


MPS 4.400

  • 4-channel car amplifier
  • 70 watts RMS x 4 at 4 ohms (100 watts RMS x 4 at 2 ohms)
  • 200 watts RMS x 2 at 4 ohms in bridged mode (4-ohm stable in bridged mode)
  • Class AB amp technology:
    100 dB signal-to-noise ratio, 0.05% distortion
  • variable high- and low-pass filters (40-400 Hz, 12 dB/octave) on front and rear channels
  • preamp and speaker-level inputs:
    speaker-level inputs require speaker wire to RCA adapters
    speaker-level inputs feature DC offset or signal sensing turn-on
  • wiring, fuse, and hardware not included with amplifier:
    8-gauge power and ground wires and a 40-amp fuse recommended
  • 13-5/16"W (including flange) x 2-1/8"H x 6-3/4"D

MPS 1.550

  • mono subwoofer amplifier
  • 350 watts RMS x 1 at 4 ohms (550 watts RMS x 1 at 2 ohms)
  • Class D amp technology:
    100 dB signal-to-noise ratio, 0.15% distortion
  • variable low-pass filter (40-220 Hz, 12 dB/octave)
  • variable bass boost (0-12 dB at 45 Hz)
  • switchable subsonic filter (off, 25, 35 Hz)
  • optional MPS-R1 wired remote level control available soon
  • preamp and speaker-level inputs:
    speaker-level inputs require speaker wire to RCA adapters
    speaker-level inputs feature DC offset or signal sensing turn-on
  • wiring, fuse, and hardware not included with amplifier:
    8-gauge power and ground wires and a 50-amp fuse recommended
  • 9-3/8"W (including flange) x 2-1/8"H x 6-3/4"D

MPS 5.950

  • 5-channel car amplifier
  • 70 watts RMS x 4 + 350 watts RMS x 1 at 4 ohms
  • 100 watts RMS x 4 + 550 watts RMS x 1 at 2 ohms
  • 200 watts RMS x 2 bridged at 4 ohms + 550 watts RMS x 1 at 2 ohms
  • Class AB design on front and rear channels, Class D on sub channel:
    100 dB signal-to-noise ratio, 0.05% distortion on front and rear channels, 0.15% distortion on sub channel
  • variable high- and low-pass filters (40-400 Hz, 12 dB/octave) on front and rear channels
  • variable low-pass filter (40-220 Hz, 12 dB/octave) on sub channel
  • variable bass boost (0-12 dB at 45 Hz) on sub channel
  • switchable subsonic filter (off, 25, 35 Hz) on sub channel
  • Other Features:
    - preamp and speaker-level inputs:
        - speaker-level inputs require speaker wire to RCA adapters
        - speaker-level inputs feature DC offset or signal sensing turn-on
    - optional MPS-R1 wired remote bass level control available soon
    - wiring, fuse, and hardware not included with amplifier:
        - 4-gauge power and ground wires and an 80-amp fuse recommended
    - 19-1/4"W (including flange) x 2-1/8"H x 6-3/4"D

D Legend Auto Accessories
Blk 5068 Ang Mo Kio Industrial Park 2
#01-1463 / #01-1467 / #01-1469
Singapore 569571
 

1659690335.jpg

1659690341.jpg

1659690347.jpg

1659690353.jpg

1659690358.jpg

Ad information

Accurate Design and High-Level Components

The MPS amplifiers were developed with proper, audiophile-grade components to ensure the highest-level performance.

  • The MPS incorporate fully balanced differential inputs that provide superior noise rejection and can endure up to 20 volts of signal input, allowing even factory speaker-level signal to be accepted through the RCA connections.
  • High fidelity Texas Instruments OP amps and ultra-low tolerance surface mount components keep the integrity of the audio signal as pure as possible.
  • Protection and thermal management are managed via an onboard microprocessor, allowing our engineers to design the amplifier without the need for internal fuses that can impede power delivery to the power supply.

Innovation is at the heart of every Morel product

The new Morel Performance Series amplifiers were developed with the same passion and product philosophy that lead Morel over the past 45 years.  The company’s R&D team worked diligently to engineer the MPS series so they provide a fine balance of built quality, sonic performance and affordability.

As a high fidelity speaker manufacturer, Morel thoroughly recognizes how poorly designed amplifiers and electronics can ruin the performance potential of a speaker system. With this in mind, the engineering directive for the MPS amplifiers was simple— produce a series of amplifiers to be exceptionally musical and dynamic, with clean, uncolored power that can drive speakers to their full sonic potential.

Accurate Design and High-Level Components

With installers in mind, our new amplifiers provide a unique feature set and installation-friendly design. Each model uses a single-sided circuit layout with all connections on one side of the amplifier, making installation simple and clean.  Preamp tuning and setting options are located discretely under a removable panel at the top of the amplifier.

Each amplifier is also devised to integrate with OEM audio systems directly through the RCA input with an adaptive connector, and auto turn-on via signal sensing or DC turn-off sensing—features usually found in much more expensive amplifiers.

Our choice of mono, four-channel and five-channel amplifier configurations ensure that the MPS amplifiers will cover almost every sound system design.  We also provide a two-year warranty for the MPS amplifiers when installed by an authorized Morel dealer.

The MPS amplifiers set new sonic boundaries for affordable amplifiers and a unique feature set that places them at the top of their game.


MPS 4.400

  • 4-channel car amplifier
  • 70 watts RMS x 4 at 4 ohms (100 watts RMS x 4 at 2 ohms)
  • 200 watts RMS x 2 at 4 ohms in bridged mode (4-ohm stable in bridged mode)
  • Class AB amp technology:
    100 dB signal-to-noise ratio, 0.05% distortion
  • variable high- and low-pass filters (40-400 Hz, 12 dB/octave) on front and rear channels
  • preamp and speaker-level inputs:
    speaker-level inputs require speaker wire to RCA adapters
    speaker-level inputs feature DC offset or signal sensing turn-on
  • wiring, fuse, and hardware not included with amplifier:
    8-gauge power and ground wires and a 40-amp fuse recommended
  • 13-5/16"W (including flange) x 2-1/8"H x 6-3/4"D

MPS 1.550

  • mono subwoofer amplifier
  • 350 watts RMS x 1 at 4 ohms (550 watts RMS x 1 at 2 ohms)
  • Class D amp technology:
    100 dB signal-to-noise ratio, 0.15% distortion
  • variable low-pass filter (40-220 Hz, 12 dB/octave)
  • variable bass boost (0-12 dB at 45 Hz)
  • switchable subsonic filter (off, 25, 35 Hz)
  • optional MPS-R1 wired remote level control available soon
  • preamp and speaker-level inputs:
    speaker-level inputs require speaker wire to RCA adapters
    speaker-level inputs feature DC offset or signal sensing turn-on
  • wiring, fuse, and hardware not included with amplifier:
    8-gauge power and ground wires and a 50-amp fuse recommended
  • 9-3/8"W (including flange) x 2-1/8"H x 6-3/4"D

MPS 5.950

  • 5-channel car amplifier
  • 70 watts RMS x 4 + 350 watts RMS x 1 at 4 ohms
  • 100 watts RMS x 4 + 550 watts RMS x 1 at 2 ohms
  • 200 watts RMS x 2 bridged at 4 ohms + 550 watts RMS x 1 at 2 ohms
  • Class AB design on front and rear channels, Class D on sub channel:
    100 dB signal-to-noise ratio, 0.05% distortion on front and rear channels, 0.15% distortion on sub channel
  • variable high- and low-pass filters (40-400 Hz, 12 dB/octave) on front and rear channels
  • variable low-pass filter (40-220 Hz, 12 dB/octave) on sub channel
  • variable bass boost (0-12 dB at 45 Hz) on sub channel
  • switchable subsonic filter (off, 25, 35 Hz) on sub channel
  • Other Features:
    - preamp and speaker-level inputs:
        - speaker-level inputs require speaker wire to RCA adapters
        - speaker-level inputs feature DC offset or signal sensing turn-on
    - optional MPS-R1 wired remote bass level control available soon
    - wiring, fuse, and hardware not included with amplifier:
        - 4-gauge power and ground wires and an 80-amp fuse recommended
    - 19-1/4"W (including flange) x 2-1/8"H x 6-3/4"D

Merchant information

Blk 5068 Ang Mo Kio Industrial Park 2 #01-1467/1469 S(569571)
9am - 6pm (Mon - Sat)
92286969 / 92216969
Posted on: 28 Mar 2024 | Updated on : 28 Mar 2024

Similar Items

Related Searches : Multi-channel Amplifier

Email Enquiry

This enquiry will be sent directly to the seller.
* indicates compulsory field.
×
×
  • Create New...