Jump to content

 
Quartorigo Overture Component Speakers (With Helix M Four DSP & Pioneer TS-WX130DA Active Subwoofer)
$1,988
Condition
Brand New
Suitable For
All Models
Posted on: 18 May 2022 | Updated on : 18 May 2022

Merchant information

160 Sin Ming Drive #08-02 Sin Ming AutoCity S(575722)
10am - 7pm (Mon - Sun)
62661719
92325621

Ad information

@ ONLY $1988 with installation & 1 Year Warranty (U.P. $2488)

Quartorigo Overture
Midwoofer - 6.5'' / 165 mm

  • Normal Impedance: 4Ω
  • Power RMS: 50W
  • Voice Coil Ø: 25mm
  • Sensivity: 90dB
  • Frequency Response: 60Hz - 7.000Hz

Midrange - 3.5'' / 89 mm

  • Normal Impedance: 4Ω
  • Power RMS: 40W
  • Voice Coil Ø: 20mm
  • Sensivity: 90dB
  • Frequency Response: 200Hz - 10.000Hz

Tweeter - 1'' / 25 mm

  • Normal Impedance: 4Ω
  • Power RMS (filtered 12dB 2500hz): 50W
  • Voice Coil Ø: 25mm
  • Sensivity: 90dB
  • Frequency Response: 3.000Hz - 20.000Hz

Tweeter protection - 4,7 uF capacitor

Helix M Four DSP Specification

  • Power RMS  ≤ 1% THD+N
    • @ 4 Ohms - 4 x 100 Watts 
    • @ 2 Ohms -  4 x 100 Watts
    • bridged @ 4 Ohms -  2 x 200 Watts
  • Max. output power per channel*
    • Up to 135 Watts RMS @ 4 / 2 Ohms
  • Amplifier technology
    • Class D
  • Inputs
    • 6 x RCA / Cinch
    • 6 x Highlevel speaker input
    • 1 x Optical SPDIF (12 - 96 kHz)
    • 1 x Remote In
  • Input sensitivity
    • RCA / Cinch 1 - 4 Volts
    • Highlevel 5 - 20 Volts
  • Input impedance RCA / Cinch
    • 22 kOhms
  • Input impedance highlevel
    • 9 - 33 Ohms or 20 kOhms
  • Outputs
    • 4 x Speaker output
    • 6 x RCA / Cinch
    • 2 x Remote Out
  • Output voltage RCA / Cinch
    • 6 Volts RMS
  • Frequency response
    • 20 Hz - 22,000 Hz
  • DSP resolution
    • 64 Bit
  • DSP power
    • 295 MHz (1.2 billion MAC operations/second)
  • Sampling rate
    • 48 kHz
  • DSP type
    • Audio signal processor
  • Signal-to-noise ratio digital input
    • 105 dB (A-weighted)
  • Signal-to-noise ration analog input
    • 102 dB (A-weighted)
  • Distortion (THD)
    • < 0.03 % 
  • Damping factor
    • 100
  • Operating voltage
    • 10.5 - 16 Volts (max. 5 sec.down to 6 Volts)
  • Idle current
    • 1500 mA
  • Max. remote output current
    • 500 mA
  • Fuse
    • 2 x 30 A Maxi-fuse (APX)
  • Additional features
    • ADEP.3 circuit, Auto Remote switch, 32 Bit CoProcessor, Control Input

TS-WX130DA
20cm (8”) Sealed Active Subwoofer
160W Max Power
Built-In Class-D Amplifier
Digital Bass Control

Woofer Size

  • 20cm x 13cm

Max Music Power

  • 160 W

Nominal Output Power

  • 50 W

Frequency Response

  • DEEP:20~200 Hz DYNAMIC:40~160 Hz

Sensitivity (1W/1m)

  • DEEP:95 dB DYNAMIC:100 dB
High end does not mean high price. At SingTrade, we believe the best sounding system is not just because of the usage of expensive products, but also having the system properly designed. Only with proper design and integration, the system can be utilized to it's fullest potential.
 
With a range of audio products, coupled with a group of experts, we strive to provide the best system and performance that suits every individual's budget. This is how we define value.
 
Call us or visit our Facebook page to find out more!
 
Main Outlet:
160, Sin Ming Drive #08-02, Sin Ming AutoCity, S(575722)
TEL: 6266 1719
 
 
Branch:
541 Balestier Road (Opp Caltex Station), S(329863) 
TEL: 6354 2853
*Kindly give us a call before heading down to Balestier branch.
 
 
 
 
 

Ad information

@ ONLY $1988 with installation & 1 Year Warranty (U.P. $2488)

Quartorigo Overture
Midwoofer - 6.5'' / 165 mm

  • Normal Impedance: 4Ω
  • Power RMS: 50W
  • Voice Coil Ø: 25mm
  • Sensivity: 90dB
  • Frequency Response: 60Hz - 7.000Hz

Midrange - 3.5'' / 89 mm

  • Normal Impedance: 4Ω
  • Power RMS: 40W
  • Voice Coil Ø: 20mm
  • Sensivity: 90dB
  • Frequency Response: 200Hz - 10.000Hz

Tweeter - 1'' / 25 mm

  • Normal Impedance: 4Ω
  • Power RMS (filtered 12dB 2500hz): 50W
  • Voice Coil Ø: 25mm
  • Sensivity: 90dB
  • Frequency Response: 3.000Hz - 20.000Hz

Tweeter protection - 4,7 uF capacitor

Helix M Four DSP Specification

  • Power RMS  ≤ 1% THD+N
    • @ 4 Ohms - 4 x 100 Watts 
    • @ 2 Ohms -  4 x 100 Watts
    • bridged @ 4 Ohms -  2 x 200 Watts
  • Max. output power per channel*
    • Up to 135 Watts RMS @ 4 / 2 Ohms
  • Amplifier technology
    • Class D
  • Inputs
    • 6 x RCA / Cinch
    • 6 x Highlevel speaker input
    • 1 x Optical SPDIF (12 - 96 kHz)
    • 1 x Remote In
  • Input sensitivity
    • RCA / Cinch 1 - 4 Volts
    • Highlevel 5 - 20 Volts
  • Input impedance RCA / Cinch
    • 22 kOhms
  • Input impedance highlevel
    • 9 - 33 Ohms or 20 kOhms
  • Outputs
    • 4 x Speaker output
    • 6 x RCA / Cinch
    • 2 x Remote Out
  • Output voltage RCA / Cinch
    • 6 Volts RMS
  • Frequency response
    • 20 Hz - 22,000 Hz
  • DSP resolution
    • 64 Bit
  • DSP power
    • 295 MHz (1.2 billion MAC operations/second)
  • Sampling rate
    • 48 kHz
  • DSP type
    • Audio signal processor
  • Signal-to-noise ratio digital input
    • 105 dB (A-weighted)
  • Signal-to-noise ration analog input
    • 102 dB (A-weighted)
  • Distortion (THD)
    • < 0.03 % 
  • Damping factor
    • 100
  • Operating voltage
    • 10.5 - 16 Volts (max. 5 sec.down to 6 Volts)
  • Idle current
    • 1500 mA
  • Max. remote output current
    • 500 mA
  • Fuse
    • 2 x 30 A Maxi-fuse (APX)
  • Additional features
    • ADEP.3 circuit, Auto Remote switch, 32 Bit CoProcessor, Control Input

TS-WX130DA
20cm (8”) Sealed Active Subwoofer
160W Max Power
Built-In Class-D Amplifier
Digital Bass Control

Woofer Size

  • 20cm x 13cm

Max Music Power

  • 160 W

Nominal Output Power

  • 50 W

Frequency Response

  • DEEP:20~200 Hz DYNAMIC:40~160 Hz

Sensitivity (1W/1m)

  • DEEP:95 dB DYNAMIC:100 dB

Merchant information

160 Sin Ming Drive #08-02Sin Ming AutoCity S(575722)
10am - 7pm (Mon - Sun)
62661719 / 92325621
Posted on: 18 May 2022 | Updated on : 18 May 2022

Similar Items

Related Searches : Component Speakers , Processor , Woofer

Email Enquiry

This enquiry will be sent directly to the seller.
* indicates compulsory field.
×
×
  • Create New...