Jump to content

SOLD
 
Focal ES 165K Component Speakers (With Musway D1S Multi-channel Amplifier and Nakamichi NBF618S-II 6×9" Active Aluminum Subwoofer)
-
Condition
Brand New
Suitable For
All Models
Posted on: 14 Nov 2022 | Updated on : 17 Dec 2022

Merchant information

81 Ubi Avenue 4 #01-10 UB. One S(408830)
9.30am - 7.30pm (Mon - Sat)
64440123
81388731

Ad information

Focal K2 Power ES 165K

 Inverted dome “M”-shaped tweeter

Tweeter easy to install (supplied with accessories)

1-1/4 (32mm) VC diameter for higher performance

Specifications:

  • Diameter: 6-1/2″ (165mm)
  • Voice coil diameter:1-1/4″ (32mm)
  • Voice coil height: 0-9/16″(15mm)
  • Motor: Magnet
  • Tweeter: TKM (“M” profile aramid fiber inverted dome)
  • Cone: Composite K2 Power “W” sandwich cone
  • Surround: Tuned Mass Damper (TMD)
  • Separated crossover: 6-12/12dB (3.5kHz)
  • Tweeter adjustable level: +3; 0; -3dB/oct
  • Max Power: 200W Nominal power: 100W RMS
  • Sensitivity (2.83V/1m): 90.8dB
  • Frequency response: 60Hz-22kHz
  • Impedance: 4 Ω

Musway D1S - 4 Channel Class-AB Amp with 6 Channel DSP

  • 4 x 25/38Watts RMS @ 4/2 Ohms
  • Input : 4 x High Level, 2 x AUX/RCA
  • Output : 4 x High Level,6x RCA (configurable via DSP)
  • Intelligent Hi-Level Input : EPS (Error Protection System) technology which prevents when connected to an OEM factory radio that no functions are impaired or error messages are written into the vehicle memory
  • Start-Stop Ready : Advanced power amplifier control circuit can eliminate the sound interruption at start and stop
  • Over 50 kinds of plug+play cables which cover around 300 different car models
  • 28-bit DSP main chip supports 10-band EQ, digital crossover and time correction
  • Built-in 4-CH high-performance high-to-low converter, Hi-Fi sound quality, low noise
  • For cars without ACC wire, speaker wire can be used to control the start and stop of machine

Nakamichi NBF618S-II 6×9" Active Aluminum Subwoofer

Specification

  • N-Power: 100W
  • Peak Power: 1000W
  • Distortion(THD): <0.4%
  • Signal To Noise Ratio: >90dB
  • Frequency Response: 20Hz -150Hz
  • Input Sensitivity,High Level: 1.0V
  • Input Sensitivity,Low Level: 300mV
  • Low Pass Flter: 50Hz - 150Hz
  • Bass Boost: 0dB + 12dB
  • Subsonic Filter: 20Hz(Fixed)
  • Fuse Rating: 20A
  • Subwoofer: 6×8 inch,4ohm
  • Unit Dimension (LxWxH): 260x195x72mm

Contact (Whatsapp): 81388731
Facebook: https://www.facebook.com/AudioSolutionPteLtd/

 
1564380951.jpg

Ad information

Focal K2 Power ES 165K

 Inverted dome “M”-shaped tweeter

Tweeter easy to install (supplied with accessories)

1-1/4 (32mm) VC diameter for higher performance

Specifications:

  • Diameter: 6-1/2″ (165mm)
  • Voice coil diameter:1-1/4″ (32mm)
  • Voice coil height: 0-9/16″(15mm)
  • Motor: Magnet
  • Tweeter: TKM (“M” profile aramid fiber inverted dome)
  • Cone: Composite K2 Power “W” sandwich cone
  • Surround: Tuned Mass Damper (TMD)
  • Separated crossover: 6-12/12dB (3.5kHz)
  • Tweeter adjustable level: +3; 0; -3dB/oct
  • Max Power: 200W Nominal power: 100W RMS
  • Sensitivity (2.83V/1m): 90.8dB
  • Frequency response: 60Hz-22kHz
  • Impedance: 4 Ω

Musway D1S - 4 Channel Class-AB Amp with 6 Channel DSP

  • 4 x 25/38Watts RMS @ 4/2 Ohms
  • Input : 4 x High Level, 2 x AUX/RCA
  • Output : 4 x High Level,6x RCA (configurable via DSP)
  • Intelligent Hi-Level Input : EPS (Error Protection System) technology which prevents when connected to an OEM factory radio that no functions are impaired or error messages are written into the vehicle memory
  • Start-Stop Ready : Advanced power amplifier control circuit can eliminate the sound interruption at start and stop
  • Over 50 kinds of plug+play cables which cover around 300 different car models
  • 28-bit DSP main chip supports 10-band EQ, digital crossover and time correction
  • Built-in 4-CH high-performance high-to-low converter, Hi-Fi sound quality, low noise
  • For cars without ACC wire, speaker wire can be used to control the start and stop of machine

Nakamichi NBF618S-II 6×9" Active Aluminum Subwoofer

Specification

  • N-Power: 100W
  • Peak Power: 1000W
  • Distortion(THD): <0.4%
  • Signal To Noise Ratio: >90dB
  • Frequency Response: 20Hz -150Hz
  • Input Sensitivity,High Level: 1.0V
  • Input Sensitivity,Low Level: 300mV
  • Low Pass Flter: 50Hz - 150Hz
  • Bass Boost: 0dB + 12dB
  • Subsonic Filter: 20Hz(Fixed)
  • Fuse Rating: 20A
  • Subwoofer: 6×8 inch,4ohm
  • Unit Dimension (LxWxH): 260x195x72mm

Merchant information

81 Ubi Avenue 4 #01-10UB. One S(408830)
9.30am - 7.30pm (Mon - Sat)
64440123 / 81388731
Posted on: 14 Nov 2022 | Updated on : 17 Dec 2022

Features & specs

The ES 165 KX2 component kit is composed of two 165 mm (6½") woofers with Kevlar cones providing an extremely rich and punchy sound. The centre of the cone is equipped with a phase plug for improved sound dispersion around the vehicle. The two "M"-shaped aramid-fibre TKMX inverted dome tweeters are equipped with bi-amplified crossovers. This enables perfect control over the high end for providing very smooth treble with perfect definition.

 

Thanks to its excellent power handling, this kit is the reference product of the K2 Power range. It even won over the hearts of the experts when it was officially revealed at the CES in Las Vegas, and received the CES Innovation 2016 award.

 

The kit is supplied with aluminium and mesh grilles.

 

Exceptional Sound for your Vehicle

 

The speaker drivers used for the K2 Power have been completely redesigned. Each component is the result of extensive research in acoustics to push back the limits of performance, of power and of precision!

 

Kevlar Cone

 

Precision and dynamics

The K2 Power Kevlar cone, a product of unique expertise Made In Focal, is to this day second to none. Composed of an ultra-light foam structure sandwiched between a thin layer of Kevlar aramid fibres, and a layer of glass fibres, the K2 Power cone combines three key factors of quality acoustics: Rigidity / Lightness / Damping, for precise and dynamic sound.

 

New "M"-Shaped Tweeter

 

For a precise and smooth high end

The new K2 Power TKMX tweeter features an exclusive "M"-shaped structure. This new-generation aramid-fibre inverted dome tweeter provides great precision in the very high end, and its combination with a "push-pull" motor with IAL2 technology extends the low end of the frequency response and provides extraordinary harmonic balance.

 

TMD Suspension

 

Say goodbye to distortionInitially developed for Sopra high-fidelity loudspeakers, TMD suspension (Tuned Mass Damper) features a special structure designed to control unwanted resonance and drastically reduce the harmonic distortion caused by the stress the cone is subject to. This patented technology endows the speaker driver with a very realistic mid-range with great definition.

 

"Radial VC" Cooling for Higher SPL

 

The new Radial VC cooling system for speaker driver voice coils expels hot air from the voice coil towards the bottom of the magnet through 6 holes. This improves control over the voice coil temperature, limiting the effects of thermal compression and improving reliability. This significantly increases the efficiency of the speaker driver. It also improves dynamics and produces a more powerful sound.

 

Progressive Spider Profile Improved Linearity and Precision

The progressive spider profile of K2 Power speaker drivers is designed to provide a full-bodied sound at low levels and to increase linearity, precision and dynamic range.

 

An Optimised Crossover for Improved Reliability

The components used for the new K2 Power crossovers were selected specifically and optimised in order to improve control over the effects of heat dissipation. These components, which are fundamental to managing the various channels and for the soundstage, are now even more reliable.

Consumer Reviews
N/A
There is no consumer review available. Be the first to Rate it !

Similar Items

Email Enquiry

This enquiry will be sent directly to the seller.
* indicates compulsory field.
×
×
  • Create New...