Jump to content

 
Helix P One 1-Channel Amplifier
$1,788 Cash & Carry
Condition
Brand New
Suitable For
All Models
Posted on: 28 Mar 2024 | Updated on : 28 Mar 2024

Merchant information

Blk 5068 Ang Mo Kio Industrial Park 2 #01-1467/1469 S(569571)
9am - 6pm (Mon - Sat)
92286969
92216969

Ad information

Features

  • High performance Class D mono amplifier with up to 1,500 Watts RMS @ 1 Ohm – a perfect match for all 2 x 2 Ohms subwoofers connected in parallel
  • Also usable as an ultra broadband amplifier with exceptional sound quality – ideal for High Resolution Audio
  • Extremely high efficiency and low heat dissipation with minimal dimensions
  • High damping factor for maximum speaker control
  • Regulated power supply with Start-Stop capability for extremely stable output power even during voltage drops
  • TwinPower Link for connecting two amplifiers in bridged mode
  • Optionally available HELIX Digital Input Module (HDM) to extend the amplifier with an optical digital input in SPDIF format

Technical data

  • Power RMS  ≤ 1% THD+N:
    - @ 4 Ohms: Normal operation (One amplifier) - 1 x 500 Watts | TwinPower Link (Two amplifiers) - 1 x 1,760 Watts 
    - @ 2 Ohms: Normal operation (One amplifier) - 1 x 880 Watts | TwinPower Link (Two amplifiers) - 1 x 3,000 Watts 
    - @ 1 Ohm: Normal operation (One amplifier) - 1 x 1,500 Watts | - 
    - bridged @ 4 Ohms: - 
    - bridged @ 2 Ohms: - 
  • Max. output power per channel*: Up to 1.800 Watts RMS @ 1 Ohm
  • Amplifier technology: Class D
  • Inputs:
    2 x RCA / Cinch
    1 x Remote In
    Optional via HDM 1 module: 1 x Optical SPDIF (28 - 96 kHz) 
  • Input sensitivity: RCA / Cinch 0.5 - 8 Volts
  • Input impedance RCA / Cinch: 6 kOhms
  • Input impedance highlevel: -
  • Outputs: 1 x Speaker output
  • Output voltage RCA / Cinch: - 
  • Signal converter for digital input: - 
  • Frequency response: 10 Hz - 40,000 Hz
  • Bass boost: -
  • Highpass: -
  • Lowpass: -
  • Bandpass: -
  • Subsonic: - 
  • Phase: - 
  • Slope high- / lowpass: -
  • Slope subsonic / lowpass: - 
  • Signal-to-noise ratio digital input: - 
  • Signal-to-noise ratio analog input: 112 dB (A-weighted)
  • Distortion (THD): < 0.01 %
  • Damping factor: > 500
  • Operating voltage: 10.5 - 16 Volts (max. 5 sec. down to 6 Volts)
  • Idle current: 1250 mA
  • Fuse: 4 x 30 A LP-Mini-fuse (APS)
  • Additional features: Input mode switch, TwinPower Link, HDM slot, Start-Stop capability
  • Dimensions (H x W x D): 50 x 260 x 190 mm / 1.97 x 10.24 x 7.48”

* In typical applications as subwoofer amplifier

D Legend Auto Accessories
Blk 5068 Ang Mo Kio Industrial Park 2
#01-1463 / #01-1467 / #01-1469
Singapore 569571
 

1659690335.jpg

1659690341.jpg

1659690347.jpg

1659690353.jpg

1659690358.jpg

Ad information

Features

  • High performance Class D mono amplifier with up to 1,500 Watts RMS @ 1 Ohm – a perfect match for all 2 x 2 Ohms subwoofers connected in parallel
  • Also usable as an ultra broadband amplifier with exceptional sound quality – ideal for High Resolution Audio
  • Extremely high efficiency and low heat dissipation with minimal dimensions
  • High damping factor for maximum speaker control
  • Regulated power supply with Start-Stop capability for extremely stable output power even during voltage drops
  • TwinPower Link for connecting two amplifiers in bridged mode
  • Optionally available HELIX Digital Input Module (HDM) to extend the amplifier with an optical digital input in SPDIF format

Technical data

  • Power RMS  ≤ 1% THD+N:
    - @ 4 Ohms: Normal operation (One amplifier) - 1 x 500 Watts | TwinPower Link (Two amplifiers) - 1 x 1,760 Watts 
    - @ 2 Ohms: Normal operation (One amplifier) - 1 x 880 Watts | TwinPower Link (Two amplifiers) - 1 x 3,000 Watts 
    - @ 1 Ohm: Normal operation (One amplifier) - 1 x 1,500 Watts | - 
    - bridged @ 4 Ohms: - 
    - bridged @ 2 Ohms: - 
  • Max. output power per channel*: Up to 1.800 Watts RMS @ 1 Ohm
  • Amplifier technology: Class D
  • Inputs:
    2 x RCA / Cinch
    1 x Remote In
    Optional via HDM 1 module: 1 x Optical SPDIF (28 - 96 kHz) 
  • Input sensitivity: RCA / Cinch 0.5 - 8 Volts
  • Input impedance RCA / Cinch: 6 kOhms
  • Input impedance highlevel: -
  • Outputs: 1 x Speaker output
  • Output voltage RCA / Cinch: - 
  • Signal converter for digital input: - 
  • Frequency response: 10 Hz - 40,000 Hz
  • Bass boost: -
  • Highpass: -
  • Lowpass: -
  • Bandpass: -
  • Subsonic: - 
  • Phase: - 
  • Slope high- / lowpass: -
  • Slope subsonic / lowpass: - 
  • Signal-to-noise ratio digital input: - 
  • Signal-to-noise ratio analog input: 112 dB (A-weighted)
  • Distortion (THD): < 0.01 %
  • Damping factor: > 500
  • Operating voltage: 10.5 - 16 Volts (max. 5 sec. down to 6 Volts)
  • Idle current: 1250 mA
  • Fuse: 4 x 30 A LP-Mini-fuse (APS)
  • Additional features: Input mode switch, TwinPower Link, HDM slot, Start-Stop capability
  • Dimensions (H x W x D): 50 x 260 x 190 mm / 1.97 x 10.24 x 7.48”

* In typical applications as subwoofer amplifier

Merchant information

Blk 5068 Ang Mo Kio Industrial Park 2 #01-1467/1469 S(569571)
9am - 6pm (Mon - Sat)
92286969 / 92216969
Posted on: 28 Mar 2024 | Updated on : 28 Mar 2024

Similar Items

Related Searches : 1-Channel Amplifier

Email Enquiry

This enquiry will be sent directly to the seller.
* indicates compulsory field.
×
×
  • Create New...