Jump to content

 
Sony XS-162ES Component Speakers (With Sony XS-160ES Coaxial Speakers)
$748
Condition
Brand New
Suitable For
All Models
Posted on: 17 Sep 2022 | Updated on : 04 Oct 2022

Merchant information

81 Ubi Avenue 4 #01-10 UB. One S(408830)
9.30am - 7.30pm (Mon - Sat)
64440123
81388731

Ad information


Package Inclusive of:

  • Sony XS-162ES Component Speakers 
  • Sony XS-160ES Coaxial Speakers

Looking for additional sub-woofer? Call to enquire now!



XS-162ES - 6 ½" (16cm) Mobile ES 2-Way Component Speakers


The XS-162ES 6.5" (16cm) component speakers deliver astonishing clarity and imaging to your in-car listening. Redefine your listening with these innovative Mobile ES speakers.


Features:


MRC Aramid Fiber Matrix Woofer


The main speaker diaphragm on the XS-162ES is crafted from Sony's unique Mica Reinforced Cellular (MRC) material. This rigid but lightweight driver allows for a much more precise response than conventional driver materials, for smoother and more natural sound characteristics.


Optimal Formulation


Embedding MRC in a unique matrix with aramid fibers suppresses diaphragm resonance and minimises distortion — not only in the lows, but also in the mid and higher frequencies. The result is sound that is powerful at all frequencies and uncommonly clean — even at high volume.


Bi-Amp Capable Crossover With Gain Selector


The audiophile-grade crossover features an optimal, lower-resistance film capacitor for smooth high-end. It's bi-amp capable design mitigates current distortion to the tweeter when running the woofer with high input levels. A dedicated gain selector helps keep balance of woofer and tweeter signal levels, and enables tweeter level adjustment even when driving the components from a single amplifier.


Separated Notch Edge Surround


The woofer surround features another proprietary Sony technology, with distinctive curved notches improving the vertical amplitude symmetry, for dramatically reduced distortion and enhanced clarity.


Five-Beam Frame Structure & Dynamic Air Diffuser


The Five-beam Frame design disperses resonance while the integrated Dynamic Air Diffuser ensures efficient air circulation for smooth cone travel and cooling of the voice coil.


Tweeters To Hit The High Notes


Compatible with High-Resolution Audio, a soft dome tweeter diaphragm is directly attached on the voice coil, designed to cover your music's ultra-high ends, with a frequency range extending up to 40kHz.


Progressive Height Rate Spider


The acoustically-optimised spider allows for higher power handling and airflow, with a profile designed for more rapid and precise cushioning of the speaker cone.


Phase Plug


The resonance damping phase plug on the XS-162ES woofer helps realise ideal frequency response, right up to the crossover point with the matched tweeters. A rigid aluminium bobbin and Dynamic Air Diffuser further support the speaker's wide frequency response, for controlled and dynamic bass delivery.


Structure Cutaway


Discover structures of the Mobile ES speaker, including newly applied mechanical approaches such as Separated Notch Edge Surround, Five-beam Frame design, and Dynamic Air Diffuser.



Specifications:


  • Size & Weight


WEIGHT (WOOFER): 950 g

WEIGHT (TWEETER): 60 g

WEIGHT (NETWORK BOX): 160 g



  • Speaker System


CONFIGURATION: Component, 2-way

SIZE: 6 1/2" (16 cm)



  • General Features


PEAK POWER: 270 W

RMS POWER: 90 W

RATED POWER: 60 W

EFFECTIVE FREQUENCY RANGE: 40-40,000 Hz

OUTPUT SOUND PRESSURE: 89 dB ±2dB SPL (1W,1m)

IMPEDANCE (OHMS): 4



  • Woofer


TYPE: Cone

SURROUND MATERIAL: Rubber (Separated Notch)

WOOFER MAGNET MATERIAL: Ferrite

WOOFER DIAPHRAGM MATERIAL: MRC Aramid Fiber Matrix



  • Tweeter


TYPE: Soft Dome

DIAMETER: 1" (2.5 cm)

TWEETER DIAPHRAGM MATERIAL: Synthetic Fiber

TWEETER MAGNET MATERIAL: Neodymium



XS-160ES - 6 ½" (16 cm) Mobile ES 2-Way Coaxial Speakers


Clarity and power come together in the XS-160ES 2-way speakers. Enjoy a premium Mobile ES experience and the ease of installation from the compact coaxial design.



Features:


MRC Aramid Fiber Matrix Woofer


The main speaker diaphragm on the XS-160ES is crafted from Sony's unique Mica Reinforced Cellular (MRC) material. This rigid but lightweight driver allows for a much more precise response than conventional driver materials, for smoother and more natural sound characteristics.


Optimal Formulation


Embedding MRC in a unique matrix with aramid fibers suppresses diaphragm resonance and minimises distortion — not only in the lows, but also in the mid and higher frequencies. The result is sound that is powerful at all frequencies and uncommonly clean — even at high volume.


Separated Notch Edge Surround


The woofer surround features another proprietary Sony technology, with distinctive curved notches improving the vertical amplitude symmetry, for dramatically reduced distortion and enhanced clarity.


Five-Beam Frame Structure & Dynamic Air Diffuser


The Five-beam Frame design disperses resonance while the integrated Dynamic Air Diffuser ensures efficient air circulation for smooth cone travel and cooling of the voice coil.


Progressive Height Rate Spider


The acoustically-optimised spider allows for higher power handling and airflow, with a profile designed for more rapid and precise cushioning of the speaker cone.


Tweeter To Hit The High Notes


Compatible with High-Resolution Audio, a soft dome tweeter diaphragm is directly attached on the voice coil, designed to cover your music's ultra-high ends, with a frequency range extending up to 40kHz.


Structure Cutaway

Discover structures of the Mobile ES speaker, including newly applied mechanical approaches such as Separated Notch Edge Surround, Five-beam Frame design, and Dynamic Air Diffuser.


Specifications:

  • Size & Weight:


WEIGHT: 990 g



  • Speaker System:


CONFIGURATION: Coaxial, 2-way

SIZE: 6 1/2" (16 cm)



  • General Features:


PEAK POWER: 270 W

RMS POWER: 90 W

RATED POWER: 60 W

EFFECTIVE FREQUENCY RANGE: 45-40,000 Hz

OUTPUT SOUND PRESSURE: 89 dB ±2dB SPL (1W,1m)

IMPEDANCE (OHMS): 4



  • Woofer:


TYPE: Cone

SURROUND MATERIAL: Rubber (Separated Notch)

WOOFER MAGNET MATERIAL: Ferrite

WOOFER DIAPHRAGM MATERIAL: MRC Aramid Fiber Matrix



  • Tweeter:


TYPE: Soft Dome

DIAMETER: 13/16" (2.0cm)

TWEETER DIAPHRAGM MATERIAL: Synthetic Fiber

TWEETER MAGNET MATERIAL: Neodymium

Contact (Whatsapp): 81388731
Facebook: https://www.facebook.com/AudioSolutionPteLtd/

 
1564380951.jpg

Ad information


Package Inclusive of:

  • Sony XS-162ES Component Speakers 
  • Sony XS-160ES Coaxial Speakers

Looking for additional sub-woofer? Call to enquire now!



XS-162ES - 6 ½" (16cm) Mobile ES 2-Way Component Speakers


The XS-162ES 6.5" (16cm) component speakers deliver astonishing clarity and imaging to your in-car listening. Redefine your listening with these innovative Mobile ES speakers.


Features:


MRC Aramid Fiber Matrix Woofer


The main speaker diaphragm on the XS-162ES is crafted from Sony's unique Mica Reinforced Cellular (MRC) material. This rigid but lightweight driver allows for a much more precise response than conventional driver materials, for smoother and more natural sound characteristics.


Optimal Formulation


Embedding MRC in a unique matrix with aramid fibers suppresses diaphragm resonance and minimises distortion — not only in the lows, but also in the mid and higher frequencies. The result is sound that is powerful at all frequencies and uncommonly clean — even at high volume.


Bi-Amp Capable Crossover With Gain Selector


The audiophile-grade crossover features an optimal, lower-resistance film capacitor for smooth high-end. It's bi-amp capable design mitigates current distortion to the tweeter when running the woofer with high input levels. A dedicated gain selector helps keep balance of woofer and tweeter signal levels, and enables tweeter level adjustment even when driving the components from a single amplifier.


Separated Notch Edge Surround


The woofer surround features another proprietary Sony technology, with distinctive curved notches improving the vertical amplitude symmetry, for dramatically reduced distortion and enhanced clarity.


Five-Beam Frame Structure & Dynamic Air Diffuser


The Five-beam Frame design disperses resonance while the integrated Dynamic Air Diffuser ensures efficient air circulation for smooth cone travel and cooling of the voice coil.


Tweeters To Hit The High Notes


Compatible with High-Resolution Audio, a soft dome tweeter diaphragm is directly attached on the voice coil, designed to cover your music's ultra-high ends, with a frequency range extending up to 40kHz.


Progressive Height Rate Spider


The acoustically-optimised spider allows for higher power handling and airflow, with a profile designed for more rapid and precise cushioning of the speaker cone.


Phase Plug


The resonance damping phase plug on the XS-162ES woofer helps realise ideal frequency response, right up to the crossover point with the matched tweeters. A rigid aluminium bobbin and Dynamic Air Diffuser further support the speaker's wide frequency response, for controlled and dynamic bass delivery.


Structure Cutaway


Discover structures of the Mobile ES speaker, including newly applied mechanical approaches such as Separated Notch Edge Surround, Five-beam Frame design, and Dynamic Air Diffuser.



Specifications:


  • Size & Weight


WEIGHT (WOOFER): 950 g

WEIGHT (TWEETER): 60 g

WEIGHT (NETWORK BOX): 160 g



  • Speaker System


CONFIGURATION: Component, 2-way

SIZE: 6 1/2" (16 cm)



  • General Features


PEAK POWER: 270 W

RMS POWER: 90 W

RATED POWER: 60 W

EFFECTIVE FREQUENCY RANGE: 40-40,000 Hz

OUTPUT SOUND PRESSURE: 89 dB ±2dB SPL (1W,1m)

IMPEDANCE (OHMS): 4



  • Woofer


TYPE: Cone

SURROUND MATERIAL: Rubber (Separated Notch)

WOOFER MAGNET MATERIAL: Ferrite

WOOFER DIAPHRAGM MATERIAL: MRC Aramid Fiber Matrix



  • Tweeter


TYPE: Soft Dome

DIAMETER: 1" (2.5 cm)

TWEETER DIAPHRAGM MATERIAL: Synthetic Fiber

TWEETER MAGNET MATERIAL: Neodymium



XS-160ES - 6 ½" (16 cm) Mobile ES 2-Way Coaxial Speakers


Clarity and power come together in the XS-160ES 2-way speakers. Enjoy a premium Mobile ES experience and the ease of installation from the compact coaxial design.



Features:


MRC Aramid Fiber Matrix Woofer


The main speaker diaphragm on the XS-160ES is crafted from Sony's unique Mica Reinforced Cellular (MRC) material. This rigid but lightweight driver allows for a much more precise response than conventional driver materials, for smoother and more natural sound characteristics.


Optimal Formulation


Embedding MRC in a unique matrix with aramid fibers suppresses diaphragm resonance and minimises distortion — not only in the lows, but also in the mid and higher frequencies. The result is sound that is powerful at all frequencies and uncommonly clean — even at high volume.


Separated Notch Edge Surround


The woofer surround features another proprietary Sony technology, with distinctive curved notches improving the vertical amplitude symmetry, for dramatically reduced distortion and enhanced clarity.


Five-Beam Frame Structure & Dynamic Air Diffuser


The Five-beam Frame design disperses resonance while the integrated Dynamic Air Diffuser ensures efficient air circulation for smooth cone travel and cooling of the voice coil.


Progressive Height Rate Spider


The acoustically-optimised spider allows for higher power handling and airflow, with a profile designed for more rapid and precise cushioning of the speaker cone.


Tweeter To Hit The High Notes


Compatible with High-Resolution Audio, a soft dome tweeter diaphragm is directly attached on the voice coil, designed to cover your music's ultra-high ends, with a frequency range extending up to 40kHz.


Structure Cutaway

Discover structures of the Mobile ES speaker, including newly applied mechanical approaches such as Separated Notch Edge Surround, Five-beam Frame design, and Dynamic Air Diffuser.


Specifications:

  • Size & Weight:


WEIGHT: 990 g



  • Speaker System:


CONFIGURATION: Coaxial, 2-way

SIZE: 6 1/2" (16 cm)



  • General Features:


PEAK POWER: 270 W

RMS POWER: 90 W

RATED POWER: 60 W

EFFECTIVE FREQUENCY RANGE: 45-40,000 Hz

OUTPUT SOUND PRESSURE: 89 dB ±2dB SPL (1W,1m)

IMPEDANCE (OHMS): 4



  • Woofer:


TYPE: Cone

SURROUND MATERIAL: Rubber (Separated Notch)

WOOFER MAGNET MATERIAL: Ferrite

WOOFER DIAPHRAGM MATERIAL: MRC Aramid Fiber Matrix



  • Tweeter:


TYPE: Soft Dome

DIAMETER: 13/16" (2.0cm)

TWEETER DIAPHRAGM MATERIAL: Synthetic Fiber

TWEETER MAGNET MATERIAL: Neodymium

Merchant information

81 Ubi Avenue 4 #01-10UB. One S(408830)
9.30am - 7.30pm (Mon - Sat)
64440123 / 81388731
Posted on: 17 Sep 2022 | Updated on : 04 Oct 2022

Features & specs

15501_12.jpg?1649059306

 

XS-162ES - 6 ½" (16cm) Mobile ES 2-Way Component Speakers

 

The XS-162ES 6.5" (16cm) component speakers deliver astonishing clarity and imaging to your in-car listening. Redefine your listening with these innovative Mobile ES speakers.

 

 

Features:

 

MRC Aramid Fiber Matrix Woofer

15501_1.jpg?1649056958

 

The main speaker diaphragm on the XS-162ES is crafted from Sony's unique Mica Reinforced Cellular (MRC) material. This rigid but lightweight driver allows for a much more precise response than conventional driver materials, for smoother and more natural sound characteristics.

 

 

 

Optimal Formulation

 

15501_2.jpg?1649056958

 

Embedding MRC in a unique matrix with aramid fibers suppresses diaphragm resonance and minimises distortion — not only in the lows, but also in the mid and higher frequencies. The result is sound that is powerful at all frequencies and uncommonly clean — even at high volume.

 

 

 

Bi-Amp Capable Crossover With Gain Selector

 

15501_3.jpg?1649056958

 

The audiophile-grade crossover features an optimal, lower-resistance film capacitor for smooth high-end. It's bi-amp capable design mitigates current distortion to the tweeter when running the woofer with high input levels. A dedicated gain selector helps keep balance of woofer and tweeter signal levels, and enables tweeter level adjustment even when driving the components from a single amplifier.

 

 

 

Separated Notch Edge Surround

 

15501_4.jpg?1649056958

 

The woofer surround features another proprietary Sony technology, with distinctive curved notches improving the vertical amplitude symmetry, for dramatically reduced distortion and enhanced clarity.

 

 

 

Five-Beam Frame Structure & Dynamic Air Diffuser

 

15501_5.jpg?1649056958

 

The Five-beam Frame design disperses resonance while the integrated Dynamic Air Diffuser ensures efficient air circulation for smooth cone travel and cooling of the voice coil.

 

 

 

Tweeters To Hit The High Notes

 

15501_6.jpg?1649056958

 

Compatible with High-Resolution Audio, a soft dome tweeter diaphragm is directly attached on the voice coil, designed to cover your music's ultra-high ends, with a frequency range extending up to 40kHz.

 

 

 

Progressive Height Rate Spider

 

15501_8.jpg?1649056958

 

The acoustically-optimised spider allows for higher power handling and airflow, with a profile designed for more rapid and precise cushioning of the speaker cone.

 

 

 

Phase Plug

 

15501_9.jpg?1649056958

 

The resonance damping phase plug on the XS-162ES woofer helps realise ideal frequency response, right up to the crossover point with the matched tweeters. A rigid aluminium bobbin and Dynamic Air Diffuser further support the speaker's wide frequency response, for controlled and dynamic bass delivery.

 

 

 

Structure Cutaway

 

15501_10.jpg?1649056958

 

15501_11.jpg?1649058326

 

Discover structures of the Mobile ES speaker, including newly applied mechanical approaches such as Separated Notch Edge Surround, Five-beam Frame design, and Dynamic Air Diffuser.

 

 

 

Specifications:

  • Size & Weight

     

    WEIGHT (WOOFER): 950 g

    WEIGHT (TWEETER): 60 g

    WEIGHT (NETWORK BOX): 160 g

     

  • Speaker System

     

    CONFIGURATION: Component, 2-way

    SIZE: 6 1/2" (16 cm)

     

  • General Features

     

    PEAK POWER: 270 W

    RMS POWER: 90 W

    RATED POWER: 60 W

    EFFECTIVE FREQUENCY RANGE: 40-40,000 Hz

    OUTPUT SOUND PRESSURE: 89 dB ±2dB SPL (1W,1m)

    IMPEDANCE (OHMS): 4

     

  • Woofer

     

    TYPE: Cone

    SURROUND MATERIAL: Rubber (Separated Notch)

    WOOFER MAGNET MATERIAL: Ferrite

    WOOFER DIAPHRAGM MATERIAL: MRC Aramid Fiber Matrix

     

  • Tweeter

     

    TYPE: Soft Dome

    DIAMETER: 1" (2.5 cm)

    TWEETER DIAPHRAGM MATERIAL: Synthetic Fiber

    TWEETER MAGNET MATERIAL: Neodymium
Consumer Reviews
N/A
There is no consumer review available. Be the first to Rate it !

Similar Items

Related Searches : Component Speakers , Coaxial Speakers

Email Enquiry

This enquiry will be sent directly to the seller.
* indicates compulsory field.
×
×
  • Create New...