Merchant information
| 3 Kim Chuan Lane #04-01/02 Goodland Group Building S(537069) | ||
| 67277600 |
Ad information
DESCRIPTION
Suitable for all commercial motor oils in gasoline and diesel engines with and without diesel particulate filter (DPF). Tested safe with catalytic converters and turbochargers. Can contents are sufficient for up to 1.6 gallons (6 liters) motor oil.
*Not suitable for motorcycles with wet clutches.
BENEFITS
- Prevents hydro tappet noise
- Lubrication holes and ducts in the oil circuit are cleaned
- Secures optimal hydro tappet performance
- Increases the reliability and travel comfort of the vehicle
APPLICATION
One 300 ml can of Liqui Moly hydraulic tappet additive is sufficient for up to 1.6 gallons (6 liters) motor oil. The product can be added at any time. After adding, run the engine until warm.
For a lasting effect, Liqui Moly Hydraulic tappet additive must be added after each oil change.
Minimum oil filling of 3 liters (3.17 U.S. QT) is requested for optimum product performance.
Ad information
DESCRIPTION
Suitable for all commercial motor oils in gasoline and diesel engines with and without diesel particulate filter (DPF). Tested safe with catalytic converters and turbochargers. Can contents are sufficient for up to 1.6 gallons (6 liters) motor oil.
*Not suitable for motorcycles with wet clutches.
BENEFITS
- Prevents hydro tappet noise
- Lubrication holes and ducts in the oil circuit are cleaned
- Secures optimal hydro tappet performance
- Increases the reliability and travel comfort of the vehicle
APPLICATION
One 300 ml can of Liqui Moly hydraulic tappet additive is sufficient for up to 1.6 gallons (6 liters) motor oil. The product can be added at any time. After adding, run the engine until warm.
For a lasting effect, Liqui Moly Hydraulic tappet additive must be added after each oil change.
Minimum oil filling of 3 liters (3.17 U.S. QT) is requested for optimum product performance.
Merchant information
|
3 Kim Chuan Lane #04-01/02Goodland Group Building S(537069)
|
||
| 67277600 |
Features & specs
High performance additive that damps down noise generation of contaminated and sticky hydraulic tappets. Cleans valve bores and thus ensures optimal functioning again.
Properties
- Improves the lubrication properties of the oil.
- Cleans valve bores.
- Suitable for use in vehicles with turbochargers and vehicles with catalytic converters.
- Prevents engine noises caused by hydraulic tappets.
Technical Data
- Colour : yellowish
- Appearance : viscous liquid
- Density at +20 °C : 0.895 g/cm³
- Viscosity at +40 °C : 510 mm² /s
More items from this seller
Email Enquiry
* indicates compulsory field.