LRx 6.9 is a six channel amplifier with built-in crossover which can be configured in endless ways. Interfacing with every type of source, expansibility of every system thanks to ECI, capacity of handling an extremely complex system by itself: these are the LRx 6.9 pros. Provided with four channels which can work into 2Ω loads and two channels which work down into 1Ω load, it totally supplies 950W (RMS) power. AMP constantly checks the operating status system and ART function allows automatic turn-on/off when a remote signal isn’t available from the source. Thanks to its features, it is the ideal amplifier for very high sound pressure levels and extraordinary musical performance.

Specifications

Power Supply

• Power supply voltage: 11÷15 VDC
• Idling current: 1.7 A
• Idling current when off: 0.02 mA
• Consumption @ 14.4 VDC (Max Musical Power): 70 A

• Distorsion – THD (1 kHz @ 4Ω): 0.04%
• Bandwidth (-3 dB): 4 ÷ 80 kHz
• S/N Ratio (A weighted @ 1 V): 100 dB
• Damping factor (1 kHz @ 4Ω): 120
• Input sensitivity: 0.3 ÷ 5 VRMS
• Input impedance: 15 kΩ
• Speaker-In Sensitivity: 1.4 ÷ 24 VRMS
• Speaker-In impedance: 5 kΩ
• Load impefance (MIN): 1Ω
• Nominal output power (RMS) NP @ 12 VDC, THD 0.3%: 65Wx4 (4Ω)+70Wx2

• 6 Ch              70W x 4 (4Ω) +   75W x 2 (4Ω)
• 6 Ch            120W x 4 (2Ω) + 140W x 2 (2Ω)
• 6 Ch            120W x 4 (2Ω) + 230W x 2 (2Ω)
• 5 Ch              70W x 4 (4Ω) + 280W x 1 (4Ω)
• 5 Ch              70W x 4 (4Ω) + 480W x 1 (2Ω)
• 5 Ch            120W x 4 (2Ω) + 470W x 1 (2Ω)
• 4 Ch            240W x 2 (4Ω) + 140W x 2 (2Ω)
• 4 Ch            240W x 2 (4Ω) + 230W x 2 (1Ω)
• 3 Ch            240W x 2 (4Ω) + 280W x 1 (4Ω)
• 3 Ch            240W x 2 (4Ω) + 470W x 1 (2Ω)