Search the Community

I posed this question to HDB. In the mean time, does anyone know the answer? Suppose two siblings, A and B, have fully paid for their HDB flat. Now, A is going to get married and wants her husband to take over B's share. He does not have enough cash to buy over the share, so he wants to use his CPF and take a bank loan to do so. Is it possible? Note that the HDB flat is fully paid for. A, A's husband and B are all Singapore PRs. If this is not possible, then is it possible for A and B to sell the flat to A and A's husband? Isn't this very strange for A -- to sell and buy back the same flat? I suspect the flat must be sold, because you cannot re-mortgage a fully paid-up HDB flat, but I'm not 100% certain.

No sure if any one has read this on soccernet, but I think it is damn funny. ============================================================= BUCHAREST -- Romanian second division soccer club UT Arad sold a player in exchange for 15 kilograms of meat, local sport daily Pro Sport reported on Monday. However, fourth division Regal Horia made a bad deal because defender Marius Cioara decided to end his footballing career and take off to Spain to find a job in agriculture or construction. "We are upset because we lost twice -- firstly because we lost a good player and secondly because we lost our team's food for a whole week," a Regal Horia official was quoted as saying by the daily in its electronic edition.

Recently reported in the newspaper some big boss got organ transplant from a criminal sentence to death. So coincidence big boss 1st in q? Something fishy going on?

Transfer Gossips Its is Jan and time for clubs to buy n sell. Pennant for Real Madrid This show how good Ramos is. Rafa, grab the cash fast

Hi, I wanted to get rid of my OPC ride now and my colleague is interested to take over. However, I doesn't know the procedure to transfer my bank loan to his? Anybody knows how am I going to go around doing it? My Insurance also.. Dunno what to do with it.. I need to sell to him as trading in my car or sell to dealer = 8K loss!!! How some experienced ppl here can help. Ima under Maybank.. Thanks..

Hi Base on lta website, http://www.onemotoring.com.sg/publish/onem...omputation.html, anuone knows how is the "value" of the car determined?

As Refer to the last minute transfer coup below, Who will be the new Champions of England come May 09? I'm dying to know ... Monday, September 1, 2008 Player From To Fee Robson da Souza Real Madrid Manchester City

As reported in ESPN : Eto'o heading to Uzbekistan? TASHKENT, July 17 (Reuters) - Unsettled Barcelona striker Samuel Eto'o is considering a move to join Uzbek club Kuruvchi. 'I have several good offers from various clubs at present,' Eto'o told a news conference in Tashkent. 'I'm planning to return to Barcelona and starting from Saturday, I will consider all my options, including the one from Kuruvchi.' 'I'm planning to return to Barcelona and starting from Saturday, I will consider all my options, including the one from Kuruvchi.' The three-times African Player of the Year has been told he is surplus to requirements at the Spanish club and is free to negotiate his own contract. Kuruvchi, who lead the Uzbek championship and face Iran's Saipa in the Asian Champions League quarter-finals in September, have made a reported $40 million offer to lure the 27-year-old from Barcelona. 'We have made a very good offer and are quite serious of getting Samuel to play here,' Kuruvchi coach Mirjalol Kasymov told the club's official website (www.pfc-kuruvchi.com). Eto'o has been Barcelona's first-choice striker since 2004 but missed a large part of the last two seasons through injury. What a joke ........... Chelsea had been offering so much $$$$ and he wants to go to Uzbekistan .......

As reported at ESPN Soccernet : Man Utd agree

As reported at ESPN Soccernet : Chelsea in Robinho negotiations, claims agent Chelsea have stepped up their interest in Real Madrid forward Robinho after sporting director Frank Arnesen met with the player's agent. New coach Luiz Felipe Scolari, who began his Chelsea job today, has already signed Portugal international Deco from Barcelona and there are increasing signs that Robinho could be the next arrival. Robinho's representative Vagner Ribeiro is determined to get the best move for the Real Madrid winger and claims he is better than Manchester United star Cristiano Ronaldo, who has been targeted by the Spanish champions. hmmm...... he is been rated better than MU Cristiano Ronaldo..... had seen him play in the the Champion League, he i so so only..... , why rate him better than CR..... Meanwhile, Scolari has been given a major boost in his bid to keep England midfielder Frank Lampard at the club after Inter Milan boss Jose Mourinho admitted the player would not be joining him until the 2009-10 season. Lampard's future has come under further scrutiny since the arrival of Deco, who joined the club on a two-year deal yesterday. Wigan Athletic have signed Dutch winger Daniel de Ridder after he was released by Birmingham City. De Ridder, 24, signs for Steve Bruce for the second time in 12 months after the manager took him to St Andrews last summer. Tottenham capture of Croatia midfielder Luca Modric for

WR03825: No enquiry of transfer fee is allowed. Please contact LTA at 1800-CALL LTA(1800-2255 582) for further assistance. This is the msg i received after i keyed in the details... why is this so?

hey ppl i need to send in my N80 phone for service, therefore need to transfer all phone contacts into sim card so i can slot it into another extra phone i have. but no matter how i try and figure, i have to do them one by one is there a way to select all the contacts in the list and transfer them into the sim? thanks in advance

British The Sun Reported : CHELSEA will slug it out with old boss Jose Mourinho for Barcelona striker Samuel Eto

British Daily Mails reported : Wenger hoping to wreck Fergie's transfer plans for the second time. By Simon Jones Last updated at 8:25 AM on 12th June 2008 Arsene Wenger is ready to wreck Sir Alex Ferguson's transfer strategy for the second time by beating him to Blackburn's

Bro's have some questions. Hope the experienced bro's can help. LTA Legal SuperSprint Muffler. Buying 2nd hand from owner. - Paying for removal & installation into my car - Must go back to Jeep Chee to change? (as SS Authorised Distributor) - Or is there anywhere cheaper it can be done? - Can everything be done at Jeep Chee? What is the procedure? How much would each part cost? 1) Removal & Installation 2) Transfer? (From prev. owner to me) 3) LTA Approval? (Still necessary?)[/b] Hope can get some help. Dun wanna tio chop carrot head thanks in advance...

Hi All, My friend is selling his car , so i take over his exhaust. His exhaust is bought and done at GR. So do i need to have the installation , change ownership done by GR and not by other workshop? All helps is appreciated. 10Q Regards Chogokin

Thinking of transfer my father car ownship to my name and keep paying the car loan. How do i do it?

CPFB allows transfer of OA to SA but not to MA. My request to transfer OA to MA was turned down as "savings in a member's various CPF accounts are for specific uses". In my case I highlighted that my SA is already max (which is the prevailing minimum sum) and no further transfer is allowed by the Board. I have enough OA to meet increase in Minimum Sum in the next 3 years when I turn 55. However my MA is only $200 and I wanted to transfer OA to MA to the max allowed cause if I dont do it now the Board will force the transfer of OA to MA before allowing me to withdraw the balance OA when I turn 55. I simply cannot understand the rationale of allowing transfer of OA to SA but not MA. On the other hand, self-employed, sole-proprietors and partnership are 'forced' to contribute to MA but not OA or SA.

Got a fren who has 2 questions regarding transfer of ownership of his car. 1) A is Seller and B is Buyer. Seller A wans to transfer the ownership of a motor car to B. But can it be done if Buyer B does not wan to buy insurance as Seller A is not intending to cancel his insurance? ( i.e there is a valid insurance on the vehicle ). 2) Can Seller A juz go down and do the transfer of ownership ( wif all the nec documents ) without the prescene of Buyer B? Note: Both Seller n Buyer r private individuals. Many tanks in advance.

Soneone told me today that its not possible to sell your new ride within 6 months from date of your registration . Meaning that you could not transfer your ride or sell to anyone within the first 6 months .. ( example 2litre car , COE - Cat B ) Must wait until 6 months then can sell ?? Understands that there is this ruling from our Gov ... Anyone can confirm ???

"WIGAN GET REALLY, REALLY EXCITING Exciting times for Wigan as they begin rebuilding for next season by signing...erm, Sami Hyypia. Despite the Finn now moving slightly slower than a Skoda, The Independent says: 'The Anfield veteran is high on Hutchings' transfer agenda at the JJB Stadium, where the former club captain Arjen de Zeeuw has been released and his fellow centre-half, Matt Jackson, rejected a one-year extension in favour of a two-year deal with the relegated Watford, but it will require a lucrative package to persuade the 33-year-old to join a side that narrowly avoided relegation last season. " http://www.football365.com/story/0,17033,8...2155608,00.html

Read the post about refund deposit after 6 COE bids and know some MCF member is asking for refund after AD who didn't secure the COE for them. Is it possible to transfer this kind of account to me? Giving that the high price now, if your account can transfer to me, with topping up and some benefit for you, the price may still be good compare with now. Me looking for a Japanese sedan around 45K - 60K range. Anybody in such situation can PM me to discuss detail.

Yo bros n sisters in MCF, wanna ask about licence plate transfers... My current car is super old, with an "ET" place, and I'm thinking of keeping it, and transferring to my next car, but problem is that I heard that licence plates can only be transferred if you're buying a new car? What if I'm buying a second hand car? Can transfer over?

Hi bros, I just bought over a full system from fellow forumer. Now the problem is where should i go to transfer his entire system into my ride?? Any recommendation before i walk into any shop to ask? Thank you for any contribution!!

power is at least 20% wasted on the standard stock kind of coupling in all our cars. Check this video and make a request for purchase for those who want a what looks like a 50 BHP boost in their cars. http://cvcoupling.com/index.php?option=com...id=37&Itemid=41 article below : (warning : quite lengthy article) The Thompson Coupling is certainly amongst the most important inventions since the advent of the internal combustion engine. It is the world's first and only, practical, constant velocity joint to have no load bearing sliding surfaces. Shaft couplings are essential to our mechanised era. Amazing as it may seem, although mankind has landed men on the moon and done so many other wondrous things he has not been capable of efficiently transmiting power from one shaft to another at constant velocity. This is an invention which has been actively sought for about 400 years when Sir Robert Hooke made the first known attempt to construct a constant velocity coupling. - The Thompson Coupling is as essential to our mechanised age as the screw, the crank, the lever and piston - The Thompson Coupling is the world's first and only Constant Velocity Joint which: - Has all loads carried by roller bearings - Has no sliding or skidding surfaces whatsoever - Can tolerate axial and radial loads without degradation - Has no torque limitation, constructed to any torque level - Does not require special lubrication - Does not require a dust boot - No wearing components except replaceable bearings and trunnions - Is suitable for automotive tail or propeller shaft applications - Is a true Constant Velocity Coupling as distinct from a cv joint - Is less bulky than a double coupling or double Cardan joint. - The Thompson Coupling is essentially two Cardan joints assembled coaxially where the cruciform-equivalent members of each are connected to one another by trunnions and bearings which are constrained to continuously lie on the homokinetic plane of the joint. The constraining means which constrains the said trunnions and bearings consists of a two segment spherical four bar linkage or spherical draglink. One end of the draglink is attached to a trunnion on an extension to the input shaft while the second end of the draglink is connected to a removable pin forming a trunnion on the inside of the yoke of the output shaft. Each arm or bar of the draglink continuously forms a great circle arc centered upon the axis of the joint. The central axis of the draglink is located on a trunnion in the middle of a "C" shaped member, the ends of the "C" shaped member are located on the extended trunnions which connect the two Cardan joints. With operation of the joint, the central axis of the draglink and therefore the trunnion in the center of the "C" member, continuously bisects the included acute angle between the extended axis of the input and output shafts and therefore continuously lies on the axis of the homokinetic plane of the joint. Consequently the axis of the trunnions which connect the inner and outer Cardan joints are constrained to continuously lie on the homokinetic plane of the joint. (Note:- The homokinetic plane is that plane which is perpendicular to the plane of the axis of the input and output shafts and which bisects the obtuse angle between the axis of the input and output shafts.) As is well known, four bar linkage mechanisms are structurally excellent and this remains true in spherical form. In operation the component parts of the coupling remain balanced about the three rotational axis of the joint namely the input shaft axis, the output shaft axis and the axis of the homokinetic plane. In mass production each and every component of the Thompson Coupling can be produced by forging and/or casting with the only further requirement being to drill and machine the bearing journals, holes and circlip grooves. No dedicated machinery is required and there is no complex machining at all. Bearings for most applications are stock and assembly is very simple. For one-off project applications, manufacture is simple and within the capability of any machine shop. No specialist machinery is required as is the case with Rzeppa type joints. The Thompson Coupling has essentially the same construction as a normal Cardan joint but does not suffer the dynamic loads due to fluctuating angular velocity of intermediate shafts and load as is the case where Cardan joints are used. As a result, the Thompson Coupling should have a life exceeding an ordinary Cardan joint. It stands to sense, and our testing will prove it. There is no untried technology in the Thompson Coupling. It is essentially identical to two Cardan joints in its torque transmission. The components and the moving components in the constraining mechanism are tried and true roller bearings. There are no mysteries or unknowns. A Thompson Coupling can be disassembled with a pair of circlip pliers and the bearings replaced with a minimum of expertise and downtime. The Thompson Coupling is very compact and may be over-engineered to increase reliability without adding substantially to bulk and weight. It is obvious that use of the Thompson Coupling in lieu of Cardan Joints will eliminate a large source of vibration in many machines and automotive applications.