Want to operate exhaust. Which shop better?

[Pandaeyes]

Dear guys and girls,

I am gg to operate on an extra exhaust I got second hand. Which shop would you recommend?

I want clean job and good stuffing.

Which stuffing should I get? Any suggestions?

Thanks!

Edited June 5, 2014 by BabyBlade

[Vogelspinen]

I think try fibreglass stuffing should b good. Recommend jeep chee, worksmanship damn swee, welding very clean. Say kelvin intro u, maybe he will giv u better price :)

[Pandaeyes]

I think try fibreglass stuffing should b good. Recommend jeep chee, worksmanship damn swee, welding very clean. Say kelvin intro u, maybe he will giv u better price :)

 

Thanks. Any particular brand of fibreglass stuffing? Damage for everything? $120?

[Vogelspinen]

Erm i nt too sure also, cos I nv operate before ahaha. Just hear from here and there. Best is u call them up or drop by and ask bah.

[Bcyn]

jeep chee to me is good. at least the service is much better den F*** K** imo.

 

only thing is dont go JC jus before closing. the workers there like rushing to go back and might do a slip shod job. best is to give em ample time to do.

[Mikeyeo]

Dear guys and girls,

 

I am gg to operate on an extra exhaust I got second hand. Which shop would you recommend?

 

I want clean job and good stuffing.

 

Which stuffing should I get? Any suggestions?

 

Thanks!

 

Hi 'Pandaeyes', are you going to operate the exhaust to have a straight through pipe? Pls note that your torque at low rev will suffer. Furthermore, if you don't operate on the catalytic converter, there is no point in operating the exhaust. You may want to consider operating the catalytic converter to have a straight through pipe.

 

Reason being that the straight through pipes in the catalytic converter and exhaust will allow free flow of air. It is very important that the space between the pipe and housing must be densely filled with fibreglass wool insulation to reduce the sound.

 

Another company which you may want to consider is Man's Exhaust at Sin Ming Industrial Park. Some of my friends did their exhaust system there and are pleased with the results.

 

It is good to enquire around these exhaust shops and let them give you their views, recommendation and pricing.

 

But before you go into operating the above 2, you need to ask yourself as to whether you are looking for high torque at low rev or high torque at mid and high end.

 

As for me, I always prefer high torque at low rev cos' the pick-up is much faster.

[Jazz]

Hi 'Pandaeyes', are you going to operate the exhaust to have a straight through pipe? Pls note that your torque at low rev will suffer. Furthermore, if you don't operate on the catalytic converter, there is no point in operating the exhaust. You may want to consider operating the catalytic converter to have a straight through pipe.

 

Reason being that the straight through pipes in the catalytic converter and exhaust will allow free flow of air. It is very important that the space between the pipe and housing must be densely filled with fibreglass wool insulation to reduce the sound.

 

Another company which you may want to consider is Man's Exhaust at Sin Ming Industrial Park. Some of my friends did their exhaust system there and are pleased with the results.

 

It is good to enquire around these exhaust shops and let them give you their views, recommendation and pricing.

 

But before you go into operating the above 2, you need to ask yourself as to whether you are looking for high torque at low rev or high torque at mid and high end.

 

As for me, I always prefer high torque at low rev cos' the pick-up is much faster.

 

Hi,

 

How to achieved high torque at low rev ? Is decat with semi flow consider ? Thanks.

 

[Pandaeyes]

Hi 'Pandaeyes', are you going to operate the exhaust to have a straight through pipe? Pls note that your torque at low rev will suffer. Furthermore, if you don't operate on the catalytic converter, there is no point in operating the exhaust. You may want to consider operating the catalytic converter to have a straight through pipe.

 

Reason being that the straight through pipes in the catalytic converter and exhaust will allow free flow of air. It is very important that the space between the pipe and housing must be densely filled with fibreglass wool insulation to reduce the sound.

 

Another company which you may want to consider is Man's Exhaust at Sin Ming Industrial Park. Some of my friends did their exhaust system there and are pleased with the results.

 

It is good to enquire around these exhaust shops and let them give you their views, recommendation and pricing.

 

But before you go into operating the above 2, you need to ask yourself as to whether you are looking for high torque at low rev or high torque at mid and high end.

 

As for me, I always prefer high torque at low rev cos' the pick-up is much faster.

 

For me, I thkg of just having a nice bassy sound and hope to just keep my low end torque as before.

 

Any suggestions?

 

[SaNibOy]

Then dun operate on ur cat. Leave it be and change or do up ur muffler.

[Zniper]

dun go FK if u wan to pass ur inspection one time...

[Turbonetics]

operating exhaust is a basic job for exhaust shops.

so i believe all the shops can give a decent job.

i suppose your main concern should be pricing.

i heard Man exhaust is one of the cheapest in town.

[Turbonetics]

Hi,

 

How to achieved high torque at low rev ? Is decat with semi flow consider ? Thanks.

 

 

 

to acheive that,don't waste your money on a stock set-up.

[Turbonetics]

do straight through and operate muffler will give a much nicer sound even on idling.

the fine if kena caught is still the same.

[Mustang]

do straight through and operate muffler will give a much nicer sound even on idling.

the fine if kena caught is still the same.

 

 

Bro a bit OT,What type of exhaust are good for pick up and probably mid range and suitable for auto transmission?Some Malaysian friends say 4-1

 

[Turbonetics]

Bro a bit OT,What type of exhaust are good for pick up and probably mid range and suitable for auto transmission?Some Malaysian friends say 4-1

 

 

iam not sure whether there is any difference between transmission.

but from my understanding,a 4-2-1 extractor is better for low-end to mid-end in a MT car.

[Mikeyeo]

For me, I thkg of just having a nice bassy sound and hope to just keep my low end torque as before.

 

Any suggestions?

 

If your main critiria is just to have the bassy sound only, you can go to Autobac, Silent or those motor accessory shops that sell bolt-on exhaust tip that produces such sound. It's not the normal add-on type as it comes with a cable or something to be connected into the stock muffler I have seen people buying them just to have the sound like you want and installed by the sellers.

 

The cost of operating the stock catalyst converter or exhaust muffler is around S$200+ each. Buying the above exhaust tip is very much cheaper and doesn't cause your low end torque to suffer. Basically, as per stock.

 

You may want to check with these shops.

[Micquek]

If your main critiria is just to have the bassy sound only, you can go to Autobac, Silent or those motor accessory shops that sell bolt-on exhaust tip that produces such sound. It's not the normal add-on type as it comes with a cable or something to be connected into the stock muffler I have seen people buying them just to have the sound like you want and installed by the sellers.

 

The cost of operating the stock catalyst converter or exhaust muffler is around S$200+ each. Buying the above exhaust tip is very much cheaper and doesn't cause your low end torque to suffer. Basically, as per stock.

 

You may want to check with these shops.

 

have that i want???

 

 

[Pandaeyes]

If your main critiria is just to have the bassy sound only, you can go to Autobac, Silent or those motor accessory shops that sell bolt-on exhaust tip that produces such sound. It's not the normal add-on type as it comes with a cable or something to be connected into the stock muffler I have seen people buying them just to have the sound like you want and installed by the sellers.

 

The cost of operating the stock catalyst converter or exhaust muffler is around S$200+ each. Buying the above exhaust tip is very much cheaper and doesn't cause your low end torque to suffer. Basically, as per stock.

 

You may want to check with these shops.

 

Hi Mike,

 

This is super new to me... what's this cable thing called?

 

If sound is what I want to acheive, then yes, this is the one... Pls share more info...

 

Thnx!