Jump to content

  • Search this thread
  • Reply to this topic
37 replies to this topic | 0 praises

#1

Posted 03 March 2010 - 02:46 PM

Simnon
  • THREAD STARTER
  • Simnon
    1st Gear
    The points of the user determines the rank. The higher the points, the higher the rank.
    Author Image
    The bar represents the rank and points of the user. The longer the bar, the higher the rank and points.
     
    Points:
    Points are accumulated from other users who Praise or Disliked this users' posts.
    99
      Joined: 06 July 2004
      Posts: 98
     
Would like to know if anyone can recommend a workshop which could do a overhaul of the carburettor.

Tried using the carburettor cleaner, but the response of accerelation is not good and suspect to be due to a dirty or faulty carburettor

However, do not have the knowledge or tools to DIY...




#2

Posted 07 March 2010 - 10:29 PM

Kazuo
  • Premium member
    Kazuo
    5th Gear
    The points of the user determines the rank. The higher the points, the higher the rank.
    Author Image
    The bar represents the rank and points of the user. The longer the bar, the higher the rank and points.
     
    Points:
    Points are accumulated from other users who Praise or Disliked this users' posts.
    1,488
      Joined: 26 December 2004
      Posts: 1,528
     
you accidentally adjusted something?


#3

Posted 07 March 2010 - 10:38 PM

Pisces69
  • Premium member
    Pisces69
    2Fast2Furious
    The points of the user determines the rank. The higher the points, the higher the rank.
    Author Image
    The bar represents the rank and points of the user. The longer the bar, the higher the rank and points.
     
    Points:
    Points are accumulated from other users who Praise or Disliked this users' posts.
    55,394
      Joined: 27 December 2001
      Posts: 55,449
     

Would like to know if anyone can recommend a workshop which could do a overhaul of the carburettor.

Tried using the carburettor cleaner, but the response of accerelation is not good and suspect to be due to a dirty or faulty carburettor

However, do not have the knowledge or tools to DIY...


=====================

Maybe u try to get the carb overhaul kit which has the gaskets & all other small parts needed to change the worn out parts in the carb.

Bring to any good & experienced mech to do the overhaul.

I dont suggest you give to those newbies MY mechs who will tell u they can do, no prob but actually they just want to learn how to do & wil use your carb as a training tool. Later it wil have all sorts problems.

I had my earlir carb cars repaired by m current mech & he did a very good job. thumbsup.gif

#4

Posted 07 March 2010 - 10:48 PM

Kazuo
  • Premium member
    Kazuo
    5th Gear
    The points of the user determines the rank. The higher the points, the higher the rank.
    Author Image
    The bar represents the rank and points of the user. The longer the bar, the higher the rank and points.
     
    Points:
    Points are accumulated from other users who Praise or Disliked this users' posts.
    1,488
      Joined: 26 December 2004
      Posts: 1,528
     
or just source for a 2e carb or 2nd hand carb...

ask donzone to sell you? haa..

#5

Posted 14 March 2010 - 12:09 PM

Ahchua5582
  • Premium member
    Ahchua5582
    Neutral Newbie
    The points of the user determines the rank. The higher the points, the higher the rank.
    Author Image
    The bar represents the rank and points of the user. The longer the bar, the higher the rank and points.
     
    Points:
    Points are accumulated from other users who Praise or Disliked this users' posts.
    16
      Joined: 11 January 2008
      Posts: 16
     
Try to go to saber.... at Sin ming...

#6

Posted 15 March 2010 - 01:39 PM

Butcher_hoe
  • Butcher_hoe
    2nd Gear
    The points of the user determines the rank. The higher the points, the higher the rank.
    Author Image
    The bar represents the rank and points of the user. The longer the bar, the higher the rank and points.
     
    Points:
    Points are accumulated from other users who Praise or Disliked this users' posts.
    240
      Joined: 29 September 2009
      Posts: 236
     
Saber from Sin Ming will be able to get you a decent working condition 1E carburettor within a decent period of time. Think majority of Starlet owners here would have visited Saber, I'm sure he would be recommended without any hesitation.

Personally, I changed a 1E carburettor about 3-4 months ago at Saber's, works fine and gives me decent mileage for my ride (+/-460km). I gave him about 1 week's notice on my intention to change my carburettor, we set a date and time and he had it all arranged. Installation + tuning timing, all done it about 2hrs.

Cost wise, it'll be best to check with Saber himself.


#7

Posted 15 March 2010 - 03:00 PM

So_nice
  • Premium member
    So_nice
    NOS-ed
    The points of the user determines the rank. The higher the points, the higher the rank.
    Author Image
    The bar represents the rank and points of the user. The longer the bar, the higher the rank and points.
     
    Points:
    Points are accumulated from other users who Praise or Disliked this users' posts.
    13,107
      Joined: 27 October 2005
      Posts: 9,608
     
go straight for a weber..still got pple selling
ओं मणिपद्मे हूं

还我河山!!!

#8

Posted 23 September 2010 - 04:19 PM

Chenoire
  • Premium member
    Chenoire
    2nd Gear
    The points of the user determines the rank. The higher the points, the higher the rank.
    Author Image
    The bar represents the rank and points of the user. The longer the bar, the higher the rank and points.
     
    Points:
    Points are accumulated from other users who Praise or Disliked this users' posts.
    130
      Joined: 31 August 2009
      Posts: 131
     
Hi guys,

anyone knows where to find a base plate for K&N filter to fit 3E carb? I have a K&N filter that has a baseplate for SU, but I need to fit it onto a 3E stock carb. Tried Saber and he says have to purchase the whole filter to get the base plate. Anyone has an old spare lying around somewhere?

Chris
hp:92380250

#9

Posted 23 September 2010 - 05:36 PM

So_nice
  • Premium member
    So_nice
    NOS-ed
    The points of the user determines the rank. The higher the points, the higher the rank.
    Author Image
    The bar represents the rank and points of the user. The longer the bar, the higher the rank and points.
     
    Points:
    Points are accumulated from other users who Praise or Disliked this users' posts.
    13,107
      Joined: 27 October 2005
      Posts: 9,608
     
u may haf to try the scrapyards. there isnt much pple using a 3e carb.
ओं मणिपद्मे हूं

还我河山!!!

#10

Posted 24 September 2010 - 10:03 AM

Emperor
  • Premium member
    Emperor
    6th Gear
    The points of the user determines the rank. The higher the points, the higher the rank.
    Author Image
    The bar represents the rank and points of the user. The longer the bar, the higher the rank and points.
     
    Points:
    Points are accumulated from other users who Praise or Disliked this users' posts.
    2,995
      Joined: 27 April 2004
      Posts: 2,991
     

Would like to know if anyone can recommend a workshop which could do a overhaul of the carburettor.

Tried using the carburettor cleaner, but the response of accerelation is not good and suspect to be due to a dirty or faulty carburettor

However, do not have the knowledge or tools to DIY...


Here's an advise if you wanna listen. (I'm assuming you're driving a 1E from your post)


Save money and get a new Aisan 1.3 carburettor and get the workshop to fix it for you. Dont waste your time overhaulin etc, It makes a whole new difference to the EP80. Take it from me, my 1E runs at a top speed of 185km/h.
Hand of God
I make cornering look as easy as walking.
www.bellydance-goddess.com, www.bazmadrumfoundry.com, www.humanrhythms.com.sg

#11

Posted 27 September 2010 - 08:00 AM

Chenoire
  • Premium member
    Chenoire
    2nd Gear
    The points of the user determines the rank. The higher the points, the higher the rank.
    Author Image
    The bar represents the rank and points of the user. The longer the bar, the higher the rank and points.
     
    Points:
    Points are accumulated from other users who Praise or Disliked this users' posts.
    130
      Joined: 31 August 2009
      Posts: 131
     
Thanks bro, but I doubt I have the time or the will to go and scrounge scrapyards, and still end up not finding it. Well, heck it then. Probably have to buy new. Was just hoping that a brother would have one lying around somewhere.

#12

Posted 27 September 2010 - 08:02 AM

Chenoire
  • Premium member
    Chenoire
    2nd Gear
    The points of the user determines the rank. The higher the points, the higher the rank.
    Author Image
    The bar represents the rank and points of the user. The longer the bar, the higher the rank and points.
     
    Points:
    Points are accumulated from other users who Praise or Disliked this users' posts.
    130
      Joined: 31 August 2009
      Posts: 131
     

Here's an advise if you wanna listen. (I'm assuming you're driving a 1E from your post)


Save money and get a new Aisan 1.3 carburettor and get the workshop to fix it for you. Dont waste your time overhaulin etc, It makes a whole new difference to the EP80. Take it from me, my 1E runs at a top speed of 185km/h.



Hi bro, what carb would you recommend for a 2E then? Want good fuel economy with decent pickup.

#13

Posted 27 September 2010 - 08:58 AM

So_nice
  • Premium member
    So_nice
    NOS-ed
    The points of the user determines the rank. The higher the points, the higher the rank.
    Author Image
    The bar represents the rank and points of the user. The longer the bar, the higher the rank and points.
     
    Points:
    Points are accumulated from other users who Praise or Disliked this users' posts.
    13,107
      Joined: 27 October 2005
      Posts: 9,608
     
want power go weber. u cant be wrong. the FC is not as bad as wat some thought. can still get ard 350-400km full tank. u juz need a good pair of hands to tune it and jettings available.

if not lup 4e-fte or if not, change cars liao hehe biggrin.gif
ओं मणिपद्मे हूं

还我河山!!!

#14

Posted 06 October 2010 - 04:42 PM

Yongwd
  • Premium member
    Yongwd
    4th Gear
    The points of the user determines the rank. The higher the points, the higher the rank.
    Author Image
    The bar represents the rank and points of the user. The longer the bar, the higher the rank and points.
     
    Points:
    Points are accumulated from other users who Praise or Disliked this users' posts.
    750
      Joined: 31 December 2001
      Posts: 746
     
Hi bro,

Where can i get a new 2E carb (Aisin or OEM) for my Starlet? Any shops to recommend?
>Singapore, an island where all the slow drivers converge<

#15

Posted 07 October 2010 - 10:54 PM

Guantanamera
  • Guantanamera
    1st Gear
    The points of the user determines the rank. The higher the points, the higher the rank.
    Author Image
    The bar represents the rank and points of the user. The longer the bar, the higher the rank and points.
     
    Points:
    Points are accumulated from other users who Praise or Disliked this users' posts.
    78
      Joined: 07 June 2009
      Posts: 85
     
I got one! pm me if interested.

#16

Posted 11 May 2011 - 09:29 AM

Emperor
  • Premium member
    Emperor
    6th Gear
    The points of the user determines the rank. The higher the points, the higher the rank.
    Author Image
    The bar represents the rank and points of the user. The longer the bar, the higher the rank and points.
     
    Points:
    Points are accumulated from other users who Praise or Disliked this users' posts.
    2,995
      Joined: 27 April 2004
      Posts: 2,991
     

Hi bro, what carb would you recommend for a 2E then? Want good fuel economy with decent pickup.


Sorry for the late reply bro.

I never used a 2E, but I would assume it would be the Aisan 1.5 carburetor... but for 2E, a good one would be the SU carb. Pretty efficient and easy installation and less hassle for tuning.
Hand of God
I make cornering look as easy as walking.
www.bellydance-goddess.com, www.bazmadrumfoundry.com, www.humanrhythms.com.sg

#17

Posted 11 May 2011 - 09:31 AM

Emperor
  • Premium member
    Emperor
    6th Gear
    The points of the user determines the rank. The higher the points, the higher the rank.
    Author Image
    The bar represents the rank and points of the user. The longer the bar, the higher the rank and points.
     
    Points:
    Points are accumulated from other users who Praise or Disliked this users' posts.
    2,995
      Joined: 27 April 2004
      Posts: 2,991
     

Hi bro,

Where can i get a new 2E carb (Aisin or OEM) for my Starlet? Any shops to recommend?


You can try Saber at Blk 18 Sin Ming.... or Simon at Triple H Eunos Industrial you will see a dark blue EP70 parked inside his shop.
Hand of God
I make cornering look as easy as walking.
www.bellydance-goddess.com, www.bazmadrumfoundry.com, www.humanrhythms.com.sg

#18

Posted 11 May 2011 - 01:05 PM

Starletgt

You can try Saber at Blk 18 Sin Ming.... or Simon at Triple H Eunos Industrial you will see a dark blue EP70 parked inside his shop.


Try SAWADI Carb .... best!!!
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Speed of God

I treat all cornerings as a drag strip

That's your problem, not my problem, don't make your problem mine

#19

Posted 11 May 2011 - 01:07 PM

Emperor
  • Premium member
    Emperor
    6th Gear
    The points of the user determines the rank. The higher the points, the higher the rank.
    Author Image
    The bar represents the rank and points of the user. The longer the bar, the higher the rank and points.
     
    Points:
    Points are accumulated from other users who Praise or Disliked this users' posts.
    2,995
      Joined: 27 April 2004
      Posts: 2,991
     

Try SAWADI Carb .... best!!!


angry.gif



*rolling on floor laughing

That one specially for Jerone!! laugh.gif
Hand of God
I make cornering look as easy as walking.
www.bellydance-goddess.com, www.bazmadrumfoundry.com, www.humanrhythms.com.sg

#20

Posted 11 May 2011 - 01:14 PM

Starletgt
Best carb!!! thumbsup.gif thumbsup.gif thumbsup.gif


angry.gif



*rolling on floor laughing

That one specially for Jerone!! laugh.gif


~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Speed of God

I treat all cornerings as a drag strip

That's your problem, not my problem, don't make your problem mine


Back to Japanese Talk  ·  Car Brands Top Reply to this topic



Quick Reply



1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users