Jump to content

Klear karbon


Boo_saa
 Share

Recommended Posts

Neutral Newbie

Hi there pardon me if ths topic have been discussed before.

Have any one tried this before. Any review or advice on this service. Was thinking of doing it for my 07 rex mileage is about 80k. Please give ur feed back on this. Tks

 

www.klearkarbon.com

↡ Advertisement
Link to post
Share on other sites

Turbocharged

Hi there pardon me if ths topic have been discussed before.

Have any one tried this before. Any review or advice on this service. Was thinking of doing it for my 07 rex mileage is about 80k. Please give ur feed back on this. Tks

 

www.klearkarbon.com

 

do a run to kl on the nshw is probably better [cool]

Link to post
Share on other sites

Twincharged

do a run to kl on the nshw is probably better [cool]

Don't need go M'sia,go to Tuas empty roads,switch off the A/C,use 2nd gear hold the revs at 4-5k rpm for 2-3km will do the job.

Link to post
Share on other sites

Don't need go M'sia,go to Tuas empty roads,switch off the A/C,use 2nd gear hold the revs at 4-5k rpm for 2-3km will do the job.

Another way is when U do an engine oil change

when the fan cuts off, off the engine and drain the oil immediately

A lot of mechs dun do this, they let the engine cool down first

Link to post
Share on other sites

2 hours ago, Mockngbrd said:

Why so many workshop cannot spell properly one? 

That is why closed down,because nobody know what Service they provide.

  • Haha! 2
Link to post
Share on other sites

12 hours ago, Tianmo said:

Isnt this the one who did the National day rice donation drive every year? :huh:

no wonder nothing happen last year and this year.

@Adrianli i think here is your answer. -_-

 

yup it is. that's what i suspected as well.

Link to post
Share on other sites

13 hours ago, Tianmo said:

Isnt this the one who did the National day rice donation drive every year? :huh:

no wonder nothing happen last year and this year.

@Adrianli i think here is your answer. -_-

 

Yup, I think so too when I got no reply from his number.

Really sad.:wacko:

Link to post
Share on other sites

19 hours ago, ER-3682 said:

That is why closed down,because nobody know what Service they provide.

Clearing carbon is a "good to have" thingy and mostly only techie guys know about.

His market is very very limited, even if he has tie up arrangements with workshops, people may still not bite cos it's an additional cost.

Link to post
Share on other sites

4 hours ago, Solar said:

Clearing carbon is a "good to have" thingy and mostly only techie guys know about.

His market is very very limited, even if he has tie up arrangements with workshops, people may still not bite cos it's an additional cost.

Agreed,esp good for Direct Injection Engines[GDI].

Link to post
Share on other sites

On 11/30/2019 at 11:12 AM, Adrianli said:

Yup, I think so too when I got no reply from his number.

Really sad.:wacko:

He should at least reply that his shop has closed down.  This is the minimum basic courtesy which biz owners lack 

  • Praise 1
Link to post
Share on other sites

Seems still operating. 

and flipping back some Facebook post, could see the wood workshop in operation. But most of the photos somehow avoid taking pics which show the wood workshop operating. 

 

  • Praise 1
Link to post
Share on other sites

Turbocharged
On 12/1/2019 at 6:31 PM, Mkl22 said:

Seems still operating. 

and flipping back some Facebook post, could see the wood workshop in operation. But most of the photos somehow avoid taking pics which show the wood workshop operating. 

 

Good to know he still there.. probably sharing the shop with the wood workshop?

Link to post
Share on other sites

1 hour ago, Solar said:

Good to know he still there.. probably sharing the shop with the wood workshop?

Imagine all the wood shavings and dust entering your air intake when they are doing the job for u... GG :D 

  • Haha! 1
Link to post
Share on other sites

On 12/1/2019 at 6:31 PM, Mkl22 said:

Seems still operating. 

and flipping back some Facebook post, could see the wood workshop in operation. But most of the photos somehow avoid taking pics which show the wood workshop operating. 

 

I see this marketing claim in one of his facebook posting:

"Amazing how the Brakes feel tighter, more responsive and more bitey after Klearing for the Honda 1.5L Petrol-Electric engine found in models such as Vezel & Shuttle Hybrids."

He might as well claim the wife feels tighter after klear karbon..... LOLLLLL

↡ Advertisement
  • Praise 1
  • Haha! 2
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...