Jump to content

Testing & Certifications


newagepolish
 Share

Recommended Posts

Tested, Approved, Verified, Certified by SGS

post-159245-0-17435700-1487998648.png                      post-159245-0-16307900-1487998762_thumb.jpg

Car detailing products from the common market always claim their product has film thickness, but the coating is barely visible by naked eye, therefore, everyone can do their own ultra-marketing.

 

To assure our quality to our customer, we brought KubeBond Diamond 9H to SGS to do the thickness measurement, they also informed us that, normal film thickness measurement tools are not capable to measure any film below 10µm, by contrast, you must measure it with Optical Microscope and magnify the specimen 1000 times. This information blows a lot of bluff on the market.

 

Optical Microscope test reports from SGS indicated that, 5 layers of Diamond 9H average thickness on the panel is 3µm, which is anti-graffiti ready; specimen of 10 layers Diamond 9H reached 6µm is already scratch resist.

 

Achieve with KubeBond-Nano Ceramic Coating

post-159245-0-67504700-1487998739_thumb.jpg             post-159245-0-38586900-1487998746_thumb.jpg

 

OFFICIAL COATING TESTING

Pencil Hardness JISK5400 (1990) - Above 9H

Alkali Resistance Test

Acid Resistance Test

Salt- Water Resistance Test

 

KubeBond Products has been tested by "SGS" - A world's leading Inspection, Verification, Testing and Certification Company. Recognized as the global benchmark for Quality and Integrity

 

post-159245-0-87504600-1488002189_thumb.jpg

ISO 9001 Certified -An International standard that specifies requirements for a quality management System (QMS).  

 

REACH Compliance - European Union address the production and use of chemical substances, and potential impacts on both human health and the environment.

Industries' regulations like REACH are constantly changing and add new items into compliance's every years, to assure our quality and safety to our customer, choose nanotech laboratory maintain high quality initiative; every year we bring our product to a global trusted SGS, renew all certifications.

 

For official reports, please visit New Age Polish

 

Wind Drag Certification (Latest)

post-159245-0-71967700-1488002775_thumb.jpg

post-159245-0-41899700-1488002791_thumb.jpg

 

The nature is full of examples of structures, materials and surfaces whose traits can be exploited for commercial application. Back in the 1990 Inspired by slippery sharkskin, the Airbus tested aircraft coating, in order to improve aerodynamic, despite many difficulties, the end result is promising but not yet sophisticated

 

CHOOSE NanoTech has developed a specialized motorsport coating, when it cured, its molecular density and nanostructure could reduce the drag by lower the surface energy. As a low-drag coating system, our coating system could increase the aerodynamic performance in motorsport with the drag reduction up to 5 percent.

 

Tested by NCKU ASTRC Wind Tunnel Lab, the national research facility which is coordinated and responsible for the wind factor of Taipei 101.

 

 

 

 

 

 

Edited by newagepolish
↡ Advertisement
  • Praise 1
Link to post
Share on other sites

Back in 1964, the contact angle, wettability and adhesion was published in Advances in Chemistry by American Chemical Society.


 


The concept of the contact angle and its equilibrium was valuable because it gave a definition to the notion of wettability and indicated the surface parameters needing measurement., so the motivation of determining solid surface energy or more precisely solid surface tension is to use the number to predict wettability and adhesion and sometimes intermolecular interactions.


 



While contact angle is a very simple measurement, we learned that less strongly hydrophilic solids will have a contact angle lower than 90 degrees. If the solid hydrophobic, the contact angle will be larger than 90 degrees. On the water droplets simply rest on the surface, without actually wetting to any significant extent. The contact angle thus directly provides information on the interaction energy between the surface and the liquid.



post-159245-0-55357900-1489655113_thumb.jpg


 


post-159245-0-17075400-1489655124_thumb.jpg


 


2b55.png Tested & Certified by SGS 2b55.png ISO Certified 2b55.png REACH Compliance 2b55.png  IMO Certified

  • Praise 1
Link to post
Share on other sites

CHOOSE NanoTech fluid drag-reduction test report

Inspired by slippery #sharkskin, we develop the feature and applied on racing car and now we tested on Maritime.

#DuralBond series tested by #ClassNK certified lab and Verified DuralBond can be achieved 3.33% water drag-reduction.

This result was amazing, that prove DuralBond not only can let the #vessel easy to clean but also significantly the water resistance reduce, that means the vessel can be faster to arrive the destination and save more fuel consumption!

2b55.png Tested & Certified by SGS 2b55.png ISO Certified 2b55.png REACH Compliance 2b55.png IMO

 

post-159245-0-35404400-1508828568_thumb.jpgpost-159245-0-56318700-1508828578_thumb.jpg

 

 

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...