Jump to content

Showcase Your ICE Setup


K2000
 Share

Recommended Posts

Neutral Newbie

>>U got opinion regarding the choice of amp? >>

 

 

knows nuts about your OZ speakers, perhaps after a audition will have a better understanding [flowerface]

Link to post
Share on other sites

Neutral Newbie

Hi anyone out there know about blitz amp and speakers. went to the website and have a look. doubt wether thier RMS rating is true or not cos all vely high. but i must say their products quite nice with built in LED light for speakers and amp. so anyone using blitz products pls comments

Link to post
Share on other sites

Neutral Newbie

Alpine 9855 HU.

Alpine 6 disc MP3/WMA/CD changer

Cadence CEQ770 7 band equaliser/preamp with subwoofer control

Cadence 12 inch subwoofer 300w rms 650w max in diyed subwoofer box.

Audiobank M5 monoblock amp, 1 X 350w rms, 1300w max.

MB Quart 6.5 inch component speaker in front hiding in door and A pillar.

CDT CL62 6.5 inch component speaker at on diyed rear board.

Cadence 4 X 75w rms Z4000 amp.

Stinger 1 Farad capacitor with blue LED voltmeter.

Monster speaker cables.

Volcanos RCA cables.

Double layer 4 door sound proof with lightweight waterproof 2mm foam.

Cable Hunter sound proof rear boot, spare tyre well, wheel arch, passenger flooring.

Cable Hunter sound proof MDF rings on front and rear speakers.

6 inch circular neon blue light.

 

Alpine%2004.jpg

 

Subwoofer%2005.jpg

 

Subwoofer%2006.jpg

 

aveo00258hz.jpg

 

aveo00316gl.jpg

 

Boot%20Light%2003.jpg

 

cadence018pl.jpg

 

cdt039tq.jpg

 

cdt249er.jpg

 

cdt364ut.jpg

 

Posted Image

 

Posted Image

 

Posted Image

 

Posted Image

 

Posted Image

 

Posted Image

 

Posted Image

Edited by Xiaogary
Link to post
Share on other sites

Neutral Newbie

My first post here, hope to meet up with like-minded bros

 

Present setup-

HU: Alpine CDA-7949

processor: PRA-H400

Tweeter amplifier: Sony XES-M1

Midbass amplifier: Phoenix Gold Titanium Ti600.2

Subwoofer amplifier: Phoenix Gold Tantrum 1200.1

Tweeters: Morel CR-103

Midbass: Dynaudio MW160

Subwoofer: Diamond audio MacDaddy 12 inch SVC 4 ohm in a 1.2 cu ft sealed box

 

Possible future setup-

HU: Sony CDX-C90

Processor: XDP-4000x

Tweeter and midrange amplifier: Phoenix Gold Titanium Ti500.4

Midbass amplifier: Phoenix Gold Titanium Ti600.2 (X2 bridged to give 600W per driver)

Subwoofer: Phoenix Gold Titanium Ti800.1

Tweeters: DLS UR1

Midrange: Dynaudio 140

Midbass: Dynaudio MW160 or Phoenix Gold Ti6 (have not decided yet)

Subwoofer: Phoenix Gold Titanium Ti10D or keep the MacDaddy (have not decided yet)

Link to post
Share on other sites

Neutral Newbie

Yes. I did the box myself, got the MDF woods from jalan besar for 20+ bucks. And the cloth cost $39.95 for 190cm X 100cm. The orange fire like furs is already on the cloth when I bought it. I where got so free pluck in one by one.

 

At first wanted to let ICE shop do the box, but after considering the workmanship, I decieded to diy. The edges are straight and flat and siliconed ar tight unlike those from ICE shop anyhow cut and nailed together, lao hong (leak air) type. Plus cost price is cheap.

 

Grill kana chopped, $20 from ICE shop. So total damage for the box is only $79.95. If include the speaker black and red extension connector at the back is $81.95.

 

Subwoofer%2008.jpg

 

I also diyed the rear speaker board, bcos ICE shop dont do the hinges which the board pivots and rotates when the boot door is opened which require very precise measurement and labour. the material only cost me $10+ for the wood for the board and the MDF rings for the speakers and $20 for the leather.

 

 

cdt062mw.jpg

cdt150of.jpg

cdt180pn.jpg

cdt172xv.jpg

cdt210cw.jpg

Edited by Xiaogary
Link to post
Share on other sites

Neutral Newbie

Hi,

I am new member mycarforum, I changing my car, and would like to sell my

Intersys ISA-650X 6 channel Full Mosfet Amplifier (50 watts x 4 + 100 watts x 2).

Sell at S$500. My contact 96461357. [bounce1]

Link to post
Share on other sites

Neutral Newbie

Hi all

My setup is all infinity .

2 front components speakers , 1 sub woofer ,1 4ch amp.

2 ch for front speaker and 2 ch for woofer.

 

 

If i add a monoblock to pump my sub , and 4ch amp for front speaker... will it make a Big Diff ??thnx

Link to post
Share on other sites

Mine a modest setup

 

HU - Sony GT700

Front - Helix blue component c/w double layer soundproofing

Rear - Helix blue coxial

Sub - Steelemate active sub

Amp - Soundstream picasso 4.100

↡ Advertisement
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...