Help - Wax

[Anubis]

Dear all,

 

Need some pro advise please. I tried to wax my car with paste wax. After wipe off with MF towel. It looks ok. However, under the sun I can see some sort of like 'stains'. It seems like streaks of grease thingy but not grease.

Please advise how I can do better. BTW I can use a foam applicator for waxing?

 

[Maddriver]

can share what wax is it?

 

usually,

 

1. Surface is dirty..u need to use a cleaner wax to prep surface if is too dirty before wax.

2. Surface is hot.

3. Did not apply wax evenly on surface

4. Application too thick,remember alway apply thin layer for any wax or sealant

5. For certain wax,recommend to buff away in 2 to 3 mins time when it starts to haze.Do panel by panel,easier for you.

 

U can use foam applicator or mf applicator,some find mf easier to use.. alway damp apllicator with water for easy application.

[Anubis]

Thanks alot,

 

Actually, I'm not sure if it's paste form. Quite hard one haha.

 

[Maddriver]

Dun mention.. then it should be paste form

[Bingo]

some wax doest sue some car. pls take look

[Ahhuat]

yah i kena before.. donnno why.. but when i change to soft99 pure carnauba.. no such problems....

 

any experts who know what causes such stains?

[Sickscientist]

What are u trying to convey....??

[Anubis]

Take look????

[Ultramega]

ppl ask for help, u tell him wax sue car and take look. thks leh.

[Subarugt]

Dear all,

 

Need some pro advise please. I tried to wax my car with paste wax. After wipe off with MF towel. It looks ok. However, under the sun I can see some sort of like 'stains'. It seems like streaks of grease thingy but not grease.

Please advise how I can do better. BTW I can use a foam applicator for waxing?

 

 

yes bro u can use foam applicator for applying wax...

 

those stains are due that there are still some wax residue left with may be harder to remove... for me sometimes i drop a few drops of water on my MF to clean the wax

[Bingo]

i means some wax cannot apply to some car surface. if u dont take look on this it will happen like his case some area not shinning at all. jsut like soft99 canot apply on black civic. if u know ur car use what kind of wax then everything will be fine

[Maddriver]

I am surprise a Japanese wax cannot be used on a japan paintworks..

 

Most of the time is due to improper application..

[Chucky2007]

can share what wax is it?

 

usually,

 

1. Surface is dirty..u need to use a cleaner wax to prep surface if is too dirty before wax.

2. Surface is hot.

3. Did not apply wax evenly on surface

4. Application too thick,remember alway apply thin layer for any wax or sealant

5. For certain wax,recommend to buff away in 2 to 3 mins time when it starts to haze.Do panel by panel,easier for you.

 

U can use foam applicator or mf applicator,some find mf easier to use.. alway damp apllicator with water for easy application.

 

sorry ot a little..

 

bro maddriver, for collinite 476, i always apply wax on the entire go in one go... then use MF cloth to buff off, is it ok? or should do panel by panel and buff off after 5 minutes or so?

 

sorry last night my friend not free so he didnt contact u to collect my stuff from u..

[Maddriver]

Yo Bro,

 

Yes,use a MF cloth to buff off the wax.I do it panel by panel,you can remove it once it haze,approx 2 to 3 mins will do.

 

No problem,just give me a ring before coming over..