Jump to content

Portable Generator For DA Machine


Qqman
 Share

Recommended Posts

I still prefer generator, my battery died on me many many times during raining. Lucky got kind aunty help me everytime, dunno why only aunty help. Maybe i aunty magnet

↡ Advertisement
Link to post
Share on other sites

Neutral Newbie

anyone interested?

 

i'm letting go my under untilised 650w petrol operated 2 stroke engine portable generator at $120.

 

call/text me 9689 7033 to deal...

Link to post
Share on other sites

Neutral Newbie

paid for $200 brand is diamond power, petrol full and left with 1 and half litres of 2t oil.

 

here is the real look...

 

post-20023-1306118643_thumb.jpg

Link to post
Share on other sites

Hi MCF brudders.

 

I have just emailed my Town Council and it is possible to rent from them the power point

at my void deck for $10/day.

 

You may wish to check with your TC if you are planning to do waxing/polishing/buffing.

 

Cheers!

Link to post
Share on other sites

Hi MCF brudders.

 

I have just emailed my Town Council and it is possible to rent from them the power point

at my void deck for $10/day.

 

You may wish to check with your TC if you are planning to do waxing/polishing/buffing.

 

Cheers!

 

Thanks for sharing Bro [thumbsup]

Link to post
Share on other sites

Hi MCF brudders.

 

I have just emailed my Town Council and it is possible to rent from them the power point

at my void deck for $10/day.

 

You may wish to check with your TC if you are planning to do waxing/polishing/buffing.

 

Cheers!

 

But remember to get from them some kind of doc to prove that you paid for the use and it is legal,

if not people may think you are pilfering :blink:

Link to post
Share on other sites

Neutral Newbie

I would suggest everyone take a look at inverters, they work equally well, no noise, much less smoke, no 2t to worry about.

Only downside is you need to have the car's engine running after some time depending on how large your battery's capacity is.

 

Therefore, when using inverter, start with the front bonnet first with the car's engine off, then proceed to other parts with the engine on if needed.

 

I gave up on the generator after just one use, it is heavy to carry it from my home to the mscp, it is very noisy (unless you are using the honda generator which is quieter but cost much more), you have to make sure the exhaust points away from your work area and that the fumes are not blown towards your work area.

 

For inverters, the max power output is 200W. I don't think it can generate enough power if you are using a Meg DA which needs 550W of power. Unless you are talking about the Bosch Ob which only uses 60W.

Link to post
Share on other sites

Inverters max I saw is 2000W (yes 2000W).

 

Most likely is peak, but 2000W peak on average should be able to support 550W.

 

alot of equipment claim to have peak 2000w maybe yes/maybe no!

 

but for how long cause alot overheat as high RPM!

Link to post
Share on other sites

Inverters max I saw is 2000W (yes 2000W).

 

Most likely is peak, but 2000W peak on average should be able to support 550W.

 

Brudder, this type you have to connect direct to battery with croc clips.

 

There's a maximum rating for use with ciggy plug.

Link to post
Share on other sites

For inverters, the max power output is 200W. I don't think it can generate enough power if you are using a Meg DA which needs 550W of power. Unless you are talking about the Bosch Ob which only uses 60W.

 

Bro, what is this Bosch Ob thing? Where to get?

Link to post
Share on other sites

Brudder, this type you have to connect direct to battery with croc clips.

 

There's a maximum rating for use with ciggy plug.

 

Yup thats right. However, I am not sure this will cause premature wear & tear on battery / alternator.

Link to post
Share on other sites

Neutral Newbie

For inverters, the max power output is 200W. I don't think it can generate enough power if you are using a Meg DA which needs 550W of power. Unless you are talking about the Bosch Ob which only uses 60W.

 

Those 200W inverters are for you to use with the cigarette connector, mainly for powering laptops and other low power device. I have a 3000W peak power/ 1500W continuous power inverter bought at Mustafa. It is connected to the battery directly via a 150A cable and is used to power a DAS6Pro, which require 850W to run if I did not remember wrongly.

Link to post
Share on other sites

Those 200W inverters are for you to use with the cigarette connector, mainly for powering laptops and other low power device. I have a 3000W peak power/ 1500W continuous power inverter bought at Mustafa. It is connected to the battery directly via a 150A cable and is used to power a DAS6Pro, which require 850W to run if I did not remember wrongly.

 

Thanks for the clarification. As long engine is turned on should be no issues right ??

Link to post
Share on other sites

Neutral Newbie

Thanks for the clarification. As long engine is turned on should be no issues right ??

 

 

It depends.

 

With the engine running, how much is the alternator's output at idling?

How much power is the car's electrical equipment drawing at idling?

 

Alternator's output power - Car's electrical equipment power requirement = amount of alternator's output left for you to charge the battery

 

If,

 

Alternator's output power - Car's electrical equipment power requirement - DA Polisher's power requirement = sufficient amount of current to keep battery charged

 

then you will not have problem.

 

If,

 

Alternator's output power - Car's electrical equipment power requirement - DA Polisher's power requirement = insufficient amount of current to keep battery charged

 

then your battery will still be flat after some time, even though the battery will not go flat as soon as purely running from battery power alone.

 

 

 

The above is just some points you need to take note when using inverter, these typically can be overcome by keeping your engine running even when the Polisher is not running, and letting your engine run for another 10 to 15 mins after you finish the polishing.

 

But this is not an ideal solution if you are polishing frequently, your catalytic converter will die sooner due to extended idling, you will waste a lot of petrol and create alot of bad gases in the long run.

 

 

A better solution for frequent polishers will be to use another deep cycle battery instead of the battery in the engine compartment. You can estimate how long you need to run the polisher then get a deep cycle battery with suitable capacity to last you throughout your whole session, then you bring your deep cycle battery home and charge at home using a battery charger.

 

↡ Advertisement
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...