Eviltrap 2nd Gear December 26, 2012 Share December 26, 2012 For those who updated their software, did you rename the file itb100hdfw.bin to setup.bin to correctly update the video camera? Sorry, dunno how to update it. ↡ Advertisement Link to post Share on other sites More sharing options...
Ddca Neutral Newbie December 27, 2012 Share December 27, 2012 For those who updated their software, did you rename the file itb100hdfw.bin to setup.bin to correctly update the video camera? Sorry, dunno how to update it. Don't need to rename. Just copy the file to the root directory of your SD card. Link to post Share on other sites More sharing options...
Ddca Neutral Newbie December 27, 2012 Share December 27, 2012 Recorded this on Christmas Day ... Link to post Share on other sites More sharing options...
Powersteer 1st Gear December 27, 2012 Share December 27, 2012 need to get another unit for my in-law. any brother or sister here have a leftover unit? PM me Link to post Share on other sites More sharing options...
Nystalia Neutral Newbie December 27, 2012 Share December 27, 2012 Guy i need help! suddenly my cam stop recording and it says solid red led indicator near PWR label and no beep heard at all! any advise? Link to post Share on other sites More sharing options...
Jovially 1st Gear December 28, 2012 Share December 28, 2012 (edited) Guy i need help! suddenly my cam stop recording and it says solid red led indicator near PWR label and no beep heard at all! any advise? You may want to check with your PC software to confirm. Do you have the UPC installed? I think the beep sound only heard when you power up (insert the power cable) the unit. Edited December 28, 2012 by Jovially Link to post Share on other sites More sharing options...
Nystalia Neutral Newbie December 28, 2012 Share December 28, 2012 You may want to check with your PC software to confirm. Do you have the UPC installed? I think the beep sound only heard when you power up (insert the power cable) the unit. Checked already, no recordings. I have UPC installed. I power up the unit, it has red solid led indicator however no beep heard. Link to post Share on other sites More sharing options...
Jovially 1st Gear December 28, 2012 Share December 28, 2012 Checked already, no recordings. I have UPC installed. I power up the unit, it has red solid led indicator however no beep heard. You bought together with the recent group buy? Suggest to send a mail to check with the seller. Link to post Share on other sites More sharing options...
Gunny76 Clutched December 28, 2012 Share December 28, 2012 Checked already, no recordings. I have UPC installed. I power up the unit, it has red solid led indicator however no beep heard. No beep at all? When you unplug the power cable from the camera, does it sing the 3 tone down scale beep? How long did u waited after you unplug the power before you insert back? And after inserting back, how long did you wait for the 3 tone up scale beep? It takes about 30 seconds for the camera to boot up. If I were you, I'd probably try the following things: 1. Tried to press the mic on/off button to see whether the LED turns to green, so at least I know whether it's completely hang or still have some hopes 2. Tried to press and hold the mic button. This will format the SD card and you should hear few 1 tone beeps, followed by 3 tone down scale beep not long after (indicating it's shutting down/rebooting/restarting services), then followed by 3 tone up scale beep (like when it's first starting and ready to go) 3. Tried different SD card, to see whether there's any diff Link to post Share on other sites More sharing options...
Gunny76 Clutched December 28, 2012 Share December 28, 2012 (edited) Ok, for those that are doubting whether KPE tunnel speed cam is working or not, doubt no more. It's working... Here's the proof, fresh from my 2 ITB-100HD (front and back), recorded yesterday evening (sorry, can't embed... not enuf point, i guess) Actually, I just kanna myself last week, no thanks to losing patience over 2 blurdy road hoggers doing 60+kph on Lane 1... Lost my patience after numerous beams and they stayed there heck care for the building up traffic behind, so step on the gas and overtook from lane 2, and totally forgot about the cam zone. Too bad on that day my ITBs just arrived, no time to install yet. Otherwise, the rear one sure could see the flash light shooting at it.... The inside of my car suddenly got so bright for 1/2 sec... Waiting for love letter know... Edited December 28, 2012 by Gunny76 Link to post Share on other sites More sharing options...
Weewee1976 3rd Gear December 28, 2012 Share December 28, 2012 My encounter of a motorcycle beating red light on Christmas Eve: Link to post Share on other sites More sharing options...
Nightmare77 Neutral Newbie December 28, 2012 Share December 28, 2012 braddell area.... the stream in front of you has already stopped at the traffic light. that idiot motorcyclist must have been day dreaming.... Link to post Share on other sites More sharing options...
Nystalia Neutral Newbie December 28, 2012 Share December 28, 2012 No beep at all? When you unplug the power cable from the camera, does it sing the 3 tone down scale beep? How long did u waited after you unplug the power before you insert back? And after inserting back, how long did you wait for the 3 tone up scale beep? It takes about 30 seconds for the camera to boot up. If I were you, I'd probably try the following things: 1. Tried to press the mic on/off button to see whether the LED turns to green, so at least I know whether it's completely hang or still have some hopes 2. Tried to press and hold the mic button. This will format the SD card and you should hear few 1 tone beeps, followed by 3 tone down scale beep not long after (indicating it's shutting down/rebooting/restarting services), then followed by 3 tone up scale beep (like when it's first starting and ready to go) 3. Tried different SD card, to see whether there's any diff when unplug, no beep, i waited for more then 5 minutes. usually like what u mentioned, 30 seconds only after plug in for boot up. Tried to press the mic button, no changes in LED. Tried formatting the card by press and hold the mic button, no beep heard. Tried without SD card, no beep. Link to post Share on other sites More sharing options...
Gunny76 Clutched December 29, 2012 Share December 29, 2012 Does it output any image from the video out port? Maybe you want to try to put the firmware file in the root folder of the sd card and see whether the device take and process it. Last resort, me think. Seems like it's gone case... Hope you'll manage to get it sorted out. Link to post Share on other sites More sharing options...
Nightmare77 Neutral Newbie December 29, 2012 Share December 29, 2012 maybe try connecting the itb-100hd directly to the battery without the UPC. this will eliminate or indicate the UPC if it's the problem or not. Link to post Share on other sites More sharing options...
Nystalia Neutral Newbie December 29, 2012 Share December 29, 2012 Does it output any image from the video out port? Maybe you want to try to put the firmware file in the root folder of the sd card and see whether the device take and process it. Last resort, me think. Seems like it's gone case... Hope you'll manage to get it sorted out. Thank you for the advise. Guess I have to rma. Link to post Share on other sites More sharing options...
Jovially 1st Gear December 29, 2012 Share December 29, 2012 Thank you for the advise. Guess I have to rma. Is this happen after long hour of powering the unit? Or out of sudden, it just dead? Link to post Share on other sites More sharing options...
Nystalia Neutral Newbie December 29, 2012 Share December 29, 2012 Is this happen after long hour of powering the unit? Or out of sudden, it just dead? Happened suddenly. Can was plugged all the times with power saver. Now I noticed that the parking led blinking red in constant pulse. The power indicator to be exact is amber instead of red. ↡ Advertisement Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In NowRelated Discussions
Related Discussions
Feedback
Feedback
How to feedback on hospital service?
How to feedback on hospital service?
Seen the new look on Sgcarmart's Used Car pages? Love it or hate it? We want to hear from you!
Seen the new look on Sgcarmart's Used Car pages? Love it or hate it? We want to hear from you!
Anyone have invested in SSB?
Anyone have invested in SSB?
Feedback on hazard
Feedback on hazard
Cannot post an Ad
Cannot post an Ad
Any feedback on castlewoodgroup?
Any feedback on castlewoodgroup?
VW Tiguan 2011-2012 feedback
VW Tiguan 2011-2012 feedback