Kizz R - can't see any difference

[Tyming]

Tonight I did wash,clay and apply KIZZ. When I applied KIZZ, i can't see any difference. sian.... now the exterior looks a bit cloudy (am I putting too much?.) I put like 3-5 drops on the sponge included for each panel, I can see the minor swirl too...... no difference before and after application......

 

Tomorrow going to do SRP,sealant - FUSSO 9 mths and FUSSO wax....hope can clear the slightly cloudy problem

[Odyssey02]

Super resin polish and Extra gloss protection is already enough. fusso wax will most likely contain cleaners and will strip off SRP and EGP again. its redundant to have fusso 9 if you already have EGP though.

[Tyming]

fusso 9 is a sealant no cleaner. the wax is pure wax..the canuaba wax (darn spelling error)

[Gen2]

Bro, I think wat he meant is SRP -> Fusso 9 sealant -> Fusso wax, he is not using EGP.

[Tyming]

correct....... but can go back to my topic.??? what happen to my KIZ R??

[Odyssey02]

i see i see cuz on top he say SRP then sealant then fusso 9 then wax. haha. salah liao.

[Gen2]

correct....... but can go back to my topic.??? what happen to my KIZ R??

 

Sorry bro, did not try Kizz R before so cannot comment .

[Valjean]

What is this Kizz product? Polish, wax or sealant?

 

In any case, cloudy residue means the product (usually a polish) has not completely been broken down yet. In turn, that means you didn't buff it enough or applied too much.

[Lokturne]

Tonight I did wash,clay and apply KIZZ. When I applied KIZZ, i can't see any difference. sian.... now the exterior looks a bit cloudy (am I putting too much?.) I put like 3-5 drops on the sponge included for each panel, I can see the minor swirl too...... no difference before and after application......

 

Tomorrow going to do SRP,sealant - FUSSO 9 mths and FUSSO wax....hope can clear the slightly cloudy problem

 

Sometimes glazes work better over-applied (slightly), leave it to dry and buff well. KIZZ Clear R is a PITA to work with. I don't like this product at all but it does work.

As the directions state, leave it for 24 hours. Once it's cured, the haze should clear up.

[Toalson]

I also cant find much difference in using the Kizz R. But its a filler n its more of a pre-wax treatment. However u cant apply sealant or wax immediately, need at least 24hr b4 next step.

[Toalson]

So for that matter is meg show car glaze 7 (cant remember the actual no) the same or different to Kizz R? Glaze is a pure polish for the clear coat rite? Its suppose to make the car look very wet but not much protection n in fact might cos problem if wanna apply sealant over it. Is tat true?

[Tyming]

applied Saturday, yesterday no time to view closely since rushing to polish/seal/wax, wife going out shopping, this morning want to view but raining....grrrrrrr

will see if its filled my minor swirl or not....but i think highly unlikely. It does leave a very smooth(like silk) feeling on the body (that's before polish or sealing or waxing)