Horns

[Guniang]

and u make other drivers sit up erected

[Fortress]

Yes, using a connector...helps.

[Grandfather]

"Yes, using a connector...helps. "

 

 

wat kind of connector u talking abt? i am preparing to connect the 2 set of horn wif 2 set of wiring wif 2 relay.

 

is this ok?

[Fortress]

We have the same idea. It is a matter of connections and where do you starts the split, as we have only one depress pedal on the steering. A connector help to make it neater and do away the problem of wire "sticky tape", which melts and easily dry up at high temp, that's all. In my case, I replace the end of the wire(which was meant for the original horn) with a connector and run the length to the other side of the car using a conduit with only one relay, as the relay will ensure that the wire will not over load, however, it might shorten the life of it, which I have not ascertain> It has been more than 1 year.

[Grandfather]

my stock horn got two set of trigger, dun noe correct word for it or not. now i am only using one of it for the 1st set of SM2. so i thought maybe can use the 2nd set of SM2 wif the reply to install the 2nd set of sm2?

 

so when i press the horn it will sound together?

[Fortress]

Had a car similar to the horn you have, however, it activate the horn with either one. I was suggesting splitting the wires so that either button is depressed, both sets work.

[Adrianli]

Hi guys,

 

I've install a pair of SM2 with my FIAA horns. Now very loud!!! My frens n wife can attest to that!!! One taxi kena from me juz tis morning n he apologised immediately!!!

 

Need to install a 20A fuse coz the car's horn fuse cannot take it!!!

 

Here is a pic.

[Grandfather]

anyway , i install both set in liao. now with 2 set of relay .

 

and test horn at west coast mac carpark and can heard echo

[Assassin]

Hoping to install too.

[Fortress]

Cool, but is it a little too hot for the cables.

[Seaweed]

you the same grandfather in NEC ??

[Vtim]

I'm too busy at the moment, will plan to do it on one of the Weekends

[KapitanE]

Horns, did I hear horns.... of course these are not approved, but who cares....

 

[Vtim]

good for N/S HW use

[Assassin]

Sure.

[Johnnytanki]

Hi,

try to buy those shrinkable sleeves from sim lim tower.....wire can go thru the sleeves and you can use a hot air gun to shrink the sleeve...in this case, no worry about short circuit

[Fortress]

You are right, we are probably talking about the same thing. I use one that has a sleeve covering the male and also the female one. They cost something like 3 per for 20 cents.

[Johnnytanki]

the one u r talking is oni those insulated terminal lugs.....i used that for my horn too...but i still get those sleeves which act as an insulator for the wires. It will help to protect the wires from heat and short circuit with the car body