Jump to content

Blitz R-vit


Elfenstar
 Share

Recommended Posts

does the R-Vit i-colour take readings from the OBD port like the monochrome R-Vit? i spoke to someone (can't rememeber who...) from imp concepts and he said need to buy sensors separately but i read magazine which say can take readings from OBD port? [confused]

Link to post
Share on other sites

The R-Vit i-color takes readings directly from your ECU via the on board diagnositic port. IN ADDITION, it can take 2 aux sensor input (1x temp, 1x press OR A/F sold seperately) [thumbsup] So besides the usual readings, you can also have your oil temp and oil press [;)] The unit can function without the add-on sensor.

 

The first generation R-Vit and the Infometer do not have this ability to accept additional sensors.

 

Further more, the R-Vit i-color will work on the newer Toyotas which runs on CAN bus. With the newer CAN bus, you can have the ability to control fan speed, injector duty etc on certain toyotas and lexus model.

Link to post
Share on other sites

Blitz just launched the R-Vit i-color which is different from the MMD i-color. The word "i-color" denotes that the unit belongs to the i-color family series of meters which is able to accept 2 aux sensor input. [dizzy]

Link to post
Share on other sites

Neutral Newbie

This R-Vit monochrome one, display visible at night?

 

Got some back light or something? Can control the back light brightness?

 

Thanks

Link to post
Share on other sites

The back light is always on. Sort of like a bluish green back-lit LCD. Think if I'm not wrong can adjust contrast. Forgot if can control brightness or not. But it's not that sort of eye-hurting bright but yet sufficient enough. [:)]

Link to post
Share on other sites

heh heh... long story about the bumper.

 

lost control once and whack into a cub. That was the first damage. But Jap kit very strong, the front lip still in 1 piece [thumbsup]

 

then another day, there was a BIG brick on the road but my car was quite low the last time and cannot clear the brick. So wham! hit the bumper!

 

Then my car colour paint left a bit which I lend it to a customer to get it match for his wrx with the same colour but he never return me the remaining until now... [:/]

Link to post
Share on other sites

Neutral Newbie
The R-Vit i-color takes readings directly from your ECU via the on board diagnositic port. IN ADDITION, it can take 2 aux sensor input (1x temp, 1x press OR A/F sold seperately) [thumbsup] So besides the usual readings, you can also have your oil temp and oil press [;)] The unit can function without the add-on sensor.

 

The first generation R-Vit and the Infometer do not have this ability to accept additional sensors.

 

Further more, the R-Vit i-color will work on the newer Toyotas which runs on CAN bus. With the newer CAN bus, you can have the ability to control fan speed, injector duty etc on certain toyotas and lexus model.

 

is there one that can be hidden in the car?? not on the dash board?? i died on the kl highway as i had no reading and my car overheated............sigh

Link to post
Share on other sites

Neutral Newbie

i went down to imperial but they had no stock for now..............The R-Vit i-color takes readings directly from ECU via the on board diagnositic port right???

The first generation R-Vit is the grey one with 3 buttons on the right side and wht other brands that can do a all-in-one reading???

 

macwell i saw had all the pop out tarcometer type but also not cheap, any other places that sell the rvit???

 

thanxs [scholar][scholar][sunny][sunny][gorgeous][gorgeous][gorgeous] 'p

↡ Advertisement
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...