Ordix 2nd Gear April 30, 2015 Share April 30, 2015 (edited) The placement and installation of sensors - Quite well done, looks from the factory in my opinion. My car black colour leh, take photo cannot see anything one if so close up. Both sensors are around 15cm below the headlights.. at the boomerang style bodywork of the front lower bumper, just at the bent of the boomerang I see. Thxx.There's 2 sensors on each side or just 1 sensor on each side? There are 2 original sensors on the bumper like the pic below. Similar position? Edited April 30, 2015 by Ordix ↡ Advertisement Link to post Share on other sites More sharing options...
Nissan833 5th Gear April 30, 2015 Share April 30, 2015 (edited) I see. Thxx. There's 2 sensors on each side or just 1 sensor on each side? There are 2 original sensors on the bumper like the pic below. Similar position? maxresdefault.jpg Nope. It's at the top bent of the boomerang bodywork on the front bumper. Around 10cm below our LED DRL lights. Your pic sensor is at bottom bent of the bodywork. This placement of the sensor suggest the sensors like more keen to pick up blockage at the 2 sides of the vehicle. The sensors I have can pick up the sides as well as the front. Edit: 1 sensor on each side Edited April 30, 2015 by Nissan833 Link to post Share on other sites More sharing options...
Ordix 2nd Gear April 30, 2015 Share April 30, 2015 Nope. It's at the top bent of the boomerang bodywork on the front bumper. Around 10cm below our LED DRL lights. Your pic sensor is at bottom bent of the bodywork. This placement of the sensor suggest the sensors like more keen to pick up blockage at the 2 sides of the vehicle. The sensors I have can pick up the sides as well as the front. Edit: 1 sensor on each side Okie okie Thxx I will ask them in detail when I go for my next servicing. :) Link to post Share on other sites More sharing options...
Kiwiloh 1st Gear May 1, 2015 Share May 1, 2015 Sent my QQ 1.2 down to Leng Kee. They did a batt check and took about 30 mins to check the DVR wiring. I did ask the service advisor what is it that they are checking but his reply was that they just want to ensure the wiring is properly done. I went down to checked and what I gathered from the SA is that some of the wiring may have clamp improperly such that the wires are being pressed when the fixture are put back. This may caused the copper wire to be exposed due to the hard pressing and may cause short circuit. Sounds logical to me... 2 Link to post Share on other sites More sharing options...
Credor Twincharged May 1, 2015 Share May 1, 2015 Hi bro thanks..thank god the dealer still quite nice let me drag 1 more week. No choice I will collect ride 1st then later go back for reupholstery in April (again still no info April when..) ..upholstery work is in Ubi not but T.C branch, hopefully no more hiccups... Hi, Fertham, got your terra brown leather seat done? Can share some photo?.. Please take it together with the dashboard and also the inner door area. Would like to see how the terra brown go with the "black" interior. TIA. Link to post Share on other sites More sharing options...
M5m3 1st Gear May 2, 2015 Share May 2, 2015 Hello, I got my front sensor as part of deal when i bot the car. It was installed by a former TC contractor located in Ubi. the installation took an hour. not sure whether it is the same if you bot from TC now but mine has the same led indicator on the dashboard. sorry for the poor lighting as i took this yesterday night 1 Link to post Share on other sites More sharing options...
gohhappy39 1st Gear May 2, 2015 Share May 2, 2015 Hi, Fertham, got your terra brown leather seat done? Can share some photo?.. Please take it together with the dashboard and also the inner door area. Would like to see how the terra brown go with the "black" interior. TIA. Hi owners, I've not quite decided on the leather colour to be done for my ride.(coming end of this month), can anyone post some pictures of their leather seats? Hope it will help me in my decision making. Thanks! Link to post Share on other sites More sharing options...
Nissan833 5th Gear May 2, 2015 Share May 2, 2015 All my previous cars all black leather interior because I wear a lot of jeans. This one comes with red stitching offered by my SE. Stock display unit with black leather in Tanchong Bukit Timah was grey/black threads. Happy with it so far. Link to post Share on other sites More sharing options...
beS Neutral Newbie May 2, 2015 Share May 2, 2015 Nice, the stitches match the red trimmings at the two sides of the transmission console. Link to post Share on other sites More sharing options...
Ordix 2nd Gear May 2, 2015 Share May 2, 2015 Hello, I got my front sensor as part of deal when i bot the car. It was installed by a former TC contractor located in Ubi. the installation took an hour. not sure whether it is the same if you bot from TC now but mine has the same led indicator on the dashboard. sorry for the poor lighting as i took this yesterday night Thanks! Your picture is clear :) Link to post Share on other sites More sharing options...
M5m3 1st Gear May 2, 2015 Share May 2, 2015 Hello Nissan833, So is your front sensor position the same as mine ? I actually want the installer to position it more to the side but they use a template to mark the position. so i guess they may not have a template that is closer to the side. I do not want to risk it to have an unbalanced front sensors Link to post Share on other sites More sharing options...
Fertham 1st Gear May 2, 2015 Share May 2, 2015 Hi, Fertham, got your terra brown leather seat done? Can share some photo?.. Please take it together with the dashboard and also the inner door area. Would like to see how the terra brown go with the "black" interior. TIA. hi bro, not yet! Will be done this weds though, TC gave me a set of new leather seats in black till the terra brown is ready..will post pics after which..lol 1 Link to post Share on other sites More sharing options...
Nissan833 5th Gear May 2, 2015 Share May 2, 2015 Different as yours. Mine is more towards the sides. Underneath the high beam light bulb. I'll grab a pic later on. 1 Link to post Share on other sites More sharing options...
Credor Twincharged May 2, 2015 Share May 2, 2015 hi bro, not yet! Will be done this weds though, TC gave me a set of new leather seats in black till the terra brown is ready..will post pics after which..lol Thanks bro. Will wait for your photo :) Glad to see that TC made a effort by providing you a temporary set of leather seat. Link to post Share on other sites More sharing options...
Hoamchu 2nd Gear May 2, 2015 Share May 2, 2015 Turbo & hybrid should be the way to go as IARC has confirmed diesel engine exhaust carcinogenic. www.iarc.fr/en/media-centre/pr/2012/pdfs/pr213_E.pdf looks like turbo engine is the viable alternative to diesel now that europeans have been told by their authorities that diesel is actually not clean. Which US, Japan, Singapore all along aware.The 1.2T Qashqai delivers max torque 165 at 1750rpm which is within the useable range (1500 - 2000). Unlike most vehicles having to rev up to 4500rpm to get the max torque.It always amaze me how most car owners just look at the max power and torque without seeing the rpm. Link to post Share on other sites More sharing options...
kilreyk Neutral Newbie May 2, 2015 Share May 2, 2015 Didn't ask about that because didn't bother me.. only occasionally when you go to those busy streets with traffic jam then people jaywalk, then the beep may trigger if they walk really really close. If not, 1,2,3,4 LED come up also no beep one. Mine came with a switch... placed just beside the ECO switch... Link to post Share on other sites More sharing options...
Ordix 2nd Gear May 2, 2015 Share May 2, 2015 Different as yours. Mine is more towards the sides. Underneath the high beam light bulb. I'll grab a pic later on. Em.. so there's different position of the sensors... Link to post Share on other sites More sharing options...
Credor Twincharged May 3, 2015 Share May 3, 2015 Em.. so there's different position of the sensors... Nissan833 car front sensor was done at TC( @ ubi.... If i am not wrong),While M5m3 was done outside(though it was by former TC contractor). Now the main question will be whether different TC SC will give different position ? ↡ Advertisement Link to post Share on other sites More sharing options...
Recommended Posts
Related Discussions
Related Discussions
Choices for a family sized SUV - just sharing my search
Choices for a family sized SUV - just sharing my search
[Concept] Honda 0 Series EVs
[Concept] Honda 0 Series EVs
Nissan QashQai 2014 Part 2
Nissan QashQai 2014 Part 2
Kia Stonic
Kia Stonic
Toyota Corolla Cross
Toyota Corolla Cross
New Mercedes GLC EV with EQ Technology
New Mercedes GLC EV with EQ Technology
4th generation Suzuki Jimny coming in 2018.
4th generation Suzuki Jimny coming in 2018.
Leapmotor C10
Leapmotor C10