Jump to content

IRoad In-Car Camera Recorder Users


Johny_walker
 Share

Recommended Posts

Only Android , not iphone ? 

 

 

Cannot afford high end , so yday I installed Q7 

 

Yup, corvit said only Android. Didn't give reason though.

 

From Apr till June, iRoad got trade-in offer. I took the chance to install x9.

↡ Advertisement
Link to post
Share on other sites

Only Android , not iphone ? 

 

 

Cannot afford high end , so yday I installed Q7 

 

I'm using iphone, apparently, it has been upgraded. Q7 is good enough IMO...

  • Praise 2
Link to post
Share on other sites

Yup, corvit said only Android. Didn't give reason though.

 

From Apr till June, iRoad got trade-in offer. I took the chance to install x9.

 

 

I actually only want my cam to record when I start engine , worried it will drain my battery plus I parked in pte estate which is safe and travel often for a long period .

 

The mechanic , instead set to record mode even at engine off , until it detect battery at 12.4v and will cut it off.

 

With this setting, is it safe or my concern is valid ?  

Link to post
Share on other sites

I actually only want my cam to record when I start engine , worried it will drain my battery plus I parked in pte estate which is safe and travel often for a long period .

 

The mechanic , instead set to record mode even at engine off , until it detect battery at 12.4v and will cut it off.

 

With this setting, is it safe or my concern is valid ?  

 

The cut-off helps to preserve the batt. The recommended min is 12.3, so your installer is already more kiasi (which is good for your batt).

 

But this ultimately still means the cam will drain your batt (as compared to if dun have parking mode) a bit.

 

If you really are concerned about the batt life and want to maximise it, plus feel there is no need for parking mode, then you should go back to your installer and ask them to rewire it to no parking mode.

 

If you want to leave it at parking mode, then what you can do, is that when you travel for long period, disconnect the cam from the power cable. Then during that period, it will not record, and also not drain the batt.

  • Praise 2
Link to post
Share on other sites

The cut-off helps to preserve the batt. The recommended min is 12.3, so your installer is already more kiasi (which is good for your batt).

 

But this ultimately still means the cam will drain your batt (as compared to if dun have parking mode) a bit.

 

If you really are concerned about the batt life and want to maximise it, plus feel there is no need for parking mode, then you should go back to your installer and ask them to rewire it to no parking mode.

 

If you want to leave it at parking mode, then what you can do, is that when you travel for long period, disconnect the cam from the power cable. Then during that period, it will not record, and also not drain the batt.

 

 

Yes that what he suggested too that if I am leaving for a long holiday , disconnect the camera 

 

In fact he has a point that these days, most people are concern about hit and run , while no one inside the car , so it is advisable to have it record while parking .... 

 

Thank u again for your reply.  

Edited by Innocuous
  • Praise 1
Link to post
Share on other sites

Hi,

 

I’ve been using Q9 with Transcend Premium 400x 128GB for a year. Recently I find the video footage plays at fast motion momentarily and randomly throughout. But the IROAD 32GB records and plays fine.

 

Either the Transcend sdcard is damage or the firmware update may have caused this. My car is parked outdoor during office hours. Heat may be a cause too.

 

I like to know which brand and model of sdcard (128GB) you’re using as I’m planning to buy a replacement.

 

TIA !

  • Praise 1
Link to post
Share on other sites

Hi,

 

I’ve been using Q9 with Transcend Premium 400x 128GB for a year. Recently I find the video footage plays at fast motion momentarily and randomly throughout. But the IROAD 32GB records and plays fine.

 

Either the Transcend sdcard is damage or the firmware update may have caused this. My car is parked outdoor during office hours. Heat may be a cause too.

 

I like to know which brand and model of sdcard (128GB) you’re using as I’m planning to buy a replacement.

 

TIA !

 

 

Try Sandisk extreme pro 128gb.....

Link to post
Share on other sites

Neutral Newbie

Hi.. All.. Recently I encounter problem connecting my iroad v9 to my hp app..App can't find my v9

 

Any advice?

Edited by Alan39
Link to post
Share on other sites

Hi,

 

I’ve been using Q9 with Transcend Premium 400x 128GB for a year. Recently I find the video footage plays at fast motion momentarily and randomly throughout. But the IROAD 32GB records and plays fine.

 

Either the Transcend sdcard is damage or the firmware update may have caused this. My car is parked outdoor during office hours. Heat may be a cause too.

 

I like to know which brand and model of sdcard (128GB) you’re using as I’m planning to buy a replacement.

 

TIA !

have been using samsung evo plus , 

https://www.qoo10.sg/g/411463625/Q107454469

Link to post
Share on other sites

have been using samsung evo plus ,

https://www.qoo10.sg/g/411463625/Q107454469

I have tested on a 64GB Samsung Evo. Notice there’s a slight lag but still better than Transcend with random fast motion.

 

May give it a try on Samsung Evo plus. Thanks !

 

Btw, how long have you been using Samsung Evo plus ?

Edited by Surf2004
  • Praise 2
Link to post
Share on other sites

I have tested on a 64GB Samsung Evo. Notice there’s a slight lag but still better than Transcend with random fast motion.

 

May give it a try on Samsung Evo plus. Thanks !

 

Btw, how long have you been using Samsung Evo plus ?

more then a year now!

  • Praise 2
Link to post
Share on other sites

I have my iRoad for 3months, until today I noticed it only have event recording mode, which mean it record only when there is a shock, normal recording cannot be found, weird, and the light on the cam is always RED, is it normal? 

  • Praise 1
Link to post
Share on other sites

Just installed iroad. I noticed that the parking mode records at 10fps only. Any idea if there is any way to set it to 30fps instead?

  • Praise 1
Link to post
Share on other sites

Truth be told, V9's 'chocolate-bar' frame factor is longer than T10's; while T10 is more extensive. 

 

T8/T10 shape factor was never answered to have warm issues. 

 

Regardless, in the event that you think V9 is more some tea, at that point put it all on the line before the costs climb no matter how you look at it. 

 

For instance, 

 

AA is offering T10 @ $390 this month, the cost from 1 April 2016 would be $430 and 

 

V9 (Season 2/2016 Version) @ $380 this month, new cost one month from now would be $420.

 

 

  • Praise 1
Link to post
Share on other sites

Neutral Newbie

good day all 

 

i have just install the iroad q7. the view from our hand phone for font camera seen ok but the rear view show the reverse like the left side of the road is show on the right side of the the handphone view which i talk to the installer but he say is like that. is the correct can someone please adv me

 

another good reason we get this Iroad q7 bec they provide a added features like the alert for the lane change .. warning for the font impact etc which is very useful but i later did i realise we have to purchase external GPS which i also did so as to get all the thing right but it dont seen to be working 

 

all i realise is some very soft funny bee sound which i dont know what is the alert about that really pizzle me '

 

please enlighten us as we think it suppose to be userfriendly 

 

thanks 

 

best regds 

 

 

  • Praise 1
Link to post
Share on other sites

good day all 

 

i have just install the iroad q7. the view from our hand phone for font camera seen ok but the rear view show the reverse like the left side of the road is show on the right side of the the handphone view which i talk to the installer but he say is like that. is the correct can someone please adv me

 

another good reason we get this Iroad q7 bec they provide a added features like the alert for the lane change .. warning for the font impact etc which is very useful but i later did i realise we have to purchase external GPS which i also did so as to get all the thing right but it dont seen to be working 

 

all i realise is some very soft funny bee sound which i dont know what is the alert about that really pizzle me '

 

please enlighten us as we think it suppose to be userfriendly 

 

thanks 

 

best regds 

 

Just installed x9 recently. Did not notice if the rear view in app is reversed but reviewing the video on PC is definitely not reversed. 

↡ Advertisement
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...