Jump to content

E200 Compressor Problem...


Bladerunner
 Share

Recommended Posts

Hello friend. You first day in MCF ah? You never seen ppl BYO spare parts? I can buy spare parts for mercedes around 30% cheaper than outside. Whats wrong with that? Whats wrong with you?

 

NB!

↡ Advertisement
Link to post
Share on other sites

Neutral Newbie

Just want to share a bad experience I had with MBM.

 

My friend brought her car to MBM for the 1st service. after servicing, MBM did not screw the oil filter back properly. As a result, all the engine oil leaked out and the engine overheated in about 2 hours after she left the workshop! It was so bad that the engine could not be started at all.

 

she brought back the car, they filled back the oil, changed the oil filter and told her its ok.

 

Till date, the car has lots of problems. Loss of power after that incident and engine oil gets eaten up. She sent back to MBM, they say its like that.

 

I feel this is not being responsible and they are just pushing responsibilities.

 

Link to post
Share on other sites

Neutral Newbie

Just want to share a bad experience I had with MBM.

 

My friend brought her car to MBM for the 1st service. after servicing, MBM did not screw the oil filter back properly. As a result, all the engine oil leaked out and the engine overheated in about 2 hours after she left the workshop! It was so bad that the engine could not be started at all.

 

she brought back the car, they filled back the oil, changed the oil filter and told her its ok.

 

Till date, the car has lots of problems. Loss of power after that incident and engine oil gets eaten up. She sent back to MBM, they say its like that.

 

I feel this is not being responsible and they are just pushing responsibilities.

they say its like that and she accepts it? thats ridiculous ask her to go back and bang table.

that incident probably has caused some MAJOR damage such as piston ring damage and as a result scuffing to the cylinder walls.

imagine metal and metal rubbing each other with NO lubrication at 2000-5000 revolutions per minute

 

go back to c&c assess the damage and if the workshop dosent wanna take responsibility its time to call your lawyer

Link to post
Share on other sites

Just want to share a bad experience I had with MBM.

 

My friend brought her car to MBM for the 1st service. after servicing, MBM did not screw the oil filter back properly. As a result, all the engine oil leaked out and the engine overheated in about 2 hours after she left the workshop! It was so bad that the engine could not be started at all.

 

she brought back the car, they filled back the oil, changed the oil filter and told her its ok.

 

Till date, the car has lots of problems. Loss of power after that incident and engine oil gets eaten up. She sent back to MBM, they say its like that.

 

I feel this is not being responsible and they are just pushing responsibilities.

 

What do you expect from a PI workshop? So many PIs sharing this one workshop?

Non-professional Ah-Beng attitude sucks.

 

Just one word - IRRESPONSIBLE! (for their own actions)

 

 

Link to post
Share on other sites

Hello friend. You first day in MCF ah? You never seen ppl BYO spare parts? I can buy spare parts for mercedes around 30% cheaper than outside. Whats wrong with that? Whats wrong with you?

 

NB!

 

not sure about normal parts but change oil can BYO

 

 

Link to post
Share on other sites

Neutral Newbie

OK, to be fair, I am not saying they are LOUSY or bad.

 

I believe ALL workshops ever committed mistakes. BUT how are the problems solved.

My friend has given up talking to them already and has paid outside to solve the problems at another workshop opposite MBM, think its called Kian Tong.

The problem was the Starter motor keep having the weried sound in the morning. It sounds like you engage your starter when your engine is already started like that.

MBM says will not replace cos its not very noticable and have to check. After a few months, she paid a couple of hundreds to replace the Motor.

 

My firned feels that after talking to them a few times, will vomit blood and things are still NOT solved, so must as well spend the $$ and save her from vomiting blood.

Link to post
Share on other sites

Neutral Newbie

What do you expect from a PI workshop? So many PIs sharing this one workshop?

Non-professional Ah-Beng attitude sucks.

 

Just one word - IRRESPONSIBLE! (for their own actions)

 

Would say they are professional & non ah beng, attitude is ok still. But agreed that many PI shares this workshops, many times they were overwhelmed with cars. And maybe due to gaining popularity, their heads swell abit, thus service lvl drop also. I've been sending my PI car to them since 2004, even my 2nd PI car, but stopped last yr when I begin to think I should look elsewhere.

Link to post
Share on other sites

Please get your friend to contact Kelvin of MBM.

 

"Is there anyway to contact the owner to find out more details?

 

Thank you guys for your continuous support. Feel free to call me up @82886188 if there are any problems. Cheers"

Link to post
Share on other sites

Please get your friend to contact Kelvin of MBM.

 

"Is there anyway to contact the owner to find out more details?

 

Thank you guys for your continuous support. Feel free to call me up @82886188 if there are any problems. Cheers"

 

bro maybe you should point kelvin to this thread and bring the issues our forumers faced to his attention.

 

a workshop getting too big for its own capabilities is a common problem. it happened to BMW owners for one of their workshops too (in sin ming also)

 

Not against workshops getting good business and getting big, but QUALITY and SERVICE must be maintained to previous high standards!

Edited by Viceroymenthol
Link to post
Share on other sites

I understand it's very difficult for independent workshops serving european high end cars to survive unless they are prepare to pay to joint professional forum groups ( the fee can be no less than USD 1,000 per year) to get a lastest service/repair information and to buy OEM speciality tools.

Without such membership the mechs abilities and knowledge will go down hill as more and more new cars come on stream.

 

 

Link to post
Share on other sites

they say its like that and she accepts it? thats ridiculous ask her to go back and bang table.

that incident probably has caused some MAJOR damage such as piston ring damage and as a result scuffing to the cylinder walls.

imagine metal and metal rubbing each other with NO lubrication at 2000-5000 revolutions per minute

 

go back to c&c assess the damage and if the workshop dosent wanna take responsibility its time to call your lawyer

 

call lawyer? u footing the bill is it? come out with a more logical reply.

 

Link to post
Share on other sites

Neutral Newbie

Just want to share a bad experience I had with MBM.

 

My friend brought her car to MBM for the 1st service. after servicing, MBM did not screw the oil filter back properly. As a result, all the engine oil leaked out and the engine overheated in about 2 hours after she left the workshop! It was so bad that the engine could not be started at all.

 

she brought back the car, they filled back the oil, changed the oil filter and told her its ok.

 

Till date, the car has lots of problems. Loss of power after that incident and engine oil gets eaten up. She sent back to MBM, they say its like that.

 

I feel this is not being responsible and they are just pushing responsibilities.

 

Think this incident must have gotten you so pissed off that you finally started your 1st post after registering in July 09 [laugh]

Link to post
Share on other sites

OK, to be fair, I am not saying they are LOUSY or bad.

 

I believe ALL workshops ever committed mistakes. BUT how are the problems solved.

My friend has given up talking to them already and has paid outside to solve the problems at another workshop opposite MBM, think its called Kian Tong.

The problem was the Starter motor keep having the weried sound in the morning. It sounds like you engage your starter when your engine is already started like that.

MBM says will not replace cos its not very noticable and have to check. After a few months, she paid a couple of hundreds to replace the Motor.

 

My firned feels that after talking to them a few times, will vomit blood and things are still NOT solved, so must as well spend the $$ and save her from vomiting blood.

Mike at Kian Teong is knowledegable..

↡ Advertisement
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...