So_nice 6th Gear November 3, 2009 Share November 3, 2009 i've changed my re001 ard chinese new year and its reaching 19,000km mark. recently during a rainy day, i had to brake hard and i feel tat the rubbers aint holding up too well. but there are still lots of thread left. just wondering if its the rubber's problem or the road is just too wet? inputs are welcomed! ↡ Advertisement Link to post Share on other sites More sharing options...
Ghostami 2nd Gear November 3, 2009 Share November 3, 2009 where is your tyre made?? If you bought it in JB its made in Thailand. I think we change around the same time, mine is hitting 18k soon, still grippy. My profile is 195/50/R15 Link to post Share on other sites More sharing options...
So_nice 6th Gear November 3, 2009 Author Share November 3, 2009 MIJ ones...bought in sg. i think probably road too wear bah. Link to post Share on other sites More sharing options...
Beregond Supersonic November 3, 2009 Share November 3, 2009 are u sure re001, got make in thai?? sg i never came across, malaysia i not sure. any way the re001 review i read about , its dry result is very good, wet , average . i using re001, 225.40.18 my self . japan, noise level very good, consider its a high performance tyres. grip very good also , so far no complain, expect the 40 profile make my car very bumpy. lol Link to post Share on other sites More sharing options...
Kyojin 1st Gear November 3, 2009 Share November 3, 2009 not tyre problem la. braking hard on wet roads? drive slower. even with Vredesteins, you'll not hold up too well when braking hard on slippery surfaces. Link to post Share on other sites More sharing options...
Jeff49er Clutched November 3, 2009 Share November 3, 2009 Mine has done 13000 km. Dpending on the surface of the roads, the tires can be noisy. But the grip over wet weather is superb Link to post Share on other sites More sharing options...
Blueray Hypersonic November 3, 2009 Share November 3, 2009 think roads too wet lah ... my RE001 use 30,000kms already, still quite happy with the grip but noise level has gone up a bit. Link to post Share on other sites More sharing options...
Ghostami 2nd Gear November 3, 2009 Share November 3, 2009 Those sold in Malaysia are made in Thai.. Go have a look, initially I thought it was a good deal but after converting to SGD I rather pay abit more for Jap made ones. When comes to brakes and tyres I will not want to save and get myself into trouble. Link to post Share on other sites More sharing options...
Jchuacl Clutched November 4, 2009 Share November 4, 2009 Typically the grip will start to drop after around 20k for the Bridgestone UHP tyres (S02, S03, RE050, RE-01R) that I've used. However, the drop will be gradual, so it's normal. Some of the other tyres that I've used (AD07) feel more scary after 20K as the drop of grip is steeper. That is why I always change my tyres at 40K or when I feel that the grip is no longer present. If you have gone tracking, the grip of the tyre will deteriorate even faster. Most people always review tyres when they first got the tyres but did not understand that the consistency of grip throughout the tyre lifetime is more important. If you feel the grip is no longer present, just drive slower or change tyres. i've changed my re001 ard chinese new year and its reaching 19,000km mark. recently during a rainy day, i had to brake hard and i feel tat the rubbers aint holding up too well. but there are still lots of thread left. just wondering if its the rubber's problem or the road is just too wet? inputs are welcomed! Link to post Share on other sites More sharing options...
Coconut23 Neutral Newbie November 6, 2009 Share November 6, 2009 i think the tyres not causing the trouble, maybe its the road condition Link to post Share on other sites More sharing options...
Help1 1st Gear November 6, 2009 Share November 6, 2009 when the road surface is unable to dispel the water fast enough, no matter how good the tyre is will still aquaplanning and skid or cannot grip to the surface fast enough...remember road surface contain lots of foreign particles such as grime, oil etc....just remember one thing drive real slow during heavy rainfall cos water ponding occurs..... Link to post Share on other sites More sharing options...
Toalson 1st Gear November 17, 2009 Share November 17, 2009 My RE001 is coming to 20K and the noise is bad or maybe my insulation is lousy. The grip wise is not too bad even on wet day. Link to post Share on other sites More sharing options...
Kanr 1st Gear November 18, 2009 Share November 18, 2009 my tires reached 40k is still good in grips but poor in noise Link to post Share on other sites More sharing options...
Beregond Supersonic November 18, 2009 Share November 18, 2009 My RE001 is coming to 20K and the noise is bad or maybe my insulation is lousy. The grip wise is not too bad even on wet day. 1 of the main reason we want to use uch tyres for me is i want to perform during wet condition at least 85-90%% of what i can perform during dry condition .\ for me if i want to dry slowly during raining days, i rather change to a comfort tyres . high profile LOL . Link to post Share on other sites More sharing options...
Jchuacl Clutched November 21, 2009 Share November 21, 2009 No, braking distance will increase exponentially with increased mileage. I see a lot people saying their tyres are ok after 20k or 40k,.Well, clearly they don't know the performance of their tyres. As I change my tyres once a year over the last 8 years, it has helped me tremendously to understand the bridgestone UHP tyre characteristics. And if a tyre can perform 85-90% in the wet as compared with the dry, it either must be a horrible dry tyre or require frequent tyre changes due to over heating. i think the tyres not causing the trouble, maybe its the road condition Link to post Share on other sites More sharing options...
Chogokin 1st Gear November 25, 2009 Share November 25, 2009 Hi All, usually jap rim for 16" is 16x6.5. taiwan rim is 16" is 16x7. Wonder if jap rim 6.5 width can use 205/45/16 tire ? any issue ? Link to post Share on other sites More sharing options...
Rickster 5th Gear November 25, 2009 Share November 25, 2009 where is your tyre made?? If you bought it in JB its made in Thailand. I think we change around the same time, mine is hitting 18k soon, still grippy. My profile is 195/50/R15 Actually, can you enlighten me on why is the place of manufacture playing such an important role in the performance of the tyres? I tot they are supposed to be using the same compound/manufacturing process wherever it is being mad. Thus be it thailand or japan, shld not have any difference right? Correct me if I'm wrong. Link to post Share on other sites More sharing options...
Rickster 5th Gear November 25, 2009 Share November 25, 2009 MIJ ones...bought in sg. i think probably road too wear bah. 19K mileage nia, not very likely... Perhaps u r driving out of the wet weather performance envelope? ↡ Advertisement Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In NowRelated Discussions
Related Discussions
Bridgestone sends you racing with the new Potenza Sport tyres
Bridgestone sends you racing with the new Potenza Sport tyres
COVID-19: Retrenchments
COVID-19: Retrenchments
After-market Welcab facilities installation
After-market Welcab facilities installation
NUS Grad becomes rubbish collector after retrenchment
NUS Grad becomes rubbish collector after retrenchment
My engine after 150,000 kms
My engine after 150,000 kms
Shell to downsize ops in sgp
Shell to downsize ops in sgp
Bridgestone Potenza S007a
Bridgestone Potenza S007a
Refund of booking fee after 6 failed COE bids?
Refund of booking fee after 6 failed COE bids?