2015 Forester 2.0

[shutterbox]

On 12/14/2021 at 1:29 PM, Stratovarius said:

Yes. Not lta friendly. I need to tape during inspection. Install switch also no use since can tell easily. 

Personally I don't like the chrome trimming of the light housing so I bought one that is black when the lights are not on. These only run along around 3/4 of the full length of the fang though.

Installation can be done at any workshop which does any ice/decorative lights.

 

I was hoping someone wiil come out with a body kit, that remove this black piece of thing and replace it with ducted ventilation

[shutterbox]

Hi guys,

the suspension replacement promo that MI gives, is a good price to go for (compared to going to outside work to do the same), assuming staying with stock suspension?

else, what other solutions for shocks replacement for 3rd party ones?

Edited February 23, 2022 by shutterbox

[jeremyboyle]

@shutterbox 

Tein Enduropro plus,good n comfy for it price!

[shutterbox]

39 minutes ago, jeremyboyle said:

@shutterbox 

Tein Enduropro plus,good n comfy for it price!

How much for full set to replace stock suspension?

Edited February 23, 2022 by shutterbox

[jeremyboyle]

@shutterbox 

1k with installation 

 

[shutterbox]

4 minutes ago, jeremyboyle said:

@shutterbox 

1k with installation 

 

Can Share where to do this for parts n installation? 

[jeremyboyle]

BKS 

[milynot]

Hi guys,

MI advise to replace Rear Wheel Bearing and Lower Arm Bush.  Is these something that can be done outside at a lower cost?

 

[shutterbox]

On 2/23/2022 at 9:43 PM, jeremyboyle said:

@shutterbox 

1k with installation 

 

1k is front n rear, full set, parts+labour?

[thefalcon]

On 3/3/2022 at 4:47 PM, milynot said:

Hi guys,

MI advise to replace Rear Wheel Bearing and Lower Arm Bush.  Is these something that can be done outside at a lower cost?

 

@milynoti replaced wheel bearing at BMS in June 2020. Rear left only S$214 all in. 

[jeremyboyle]

@shutterbox

 yes,but that was roughly 6 mths ago not sure about now

[PSP415]

2 hours ago, jeremyboyle said:

@shutterbox

 yes,but that was roughly 6 mths ago not sure about now

I think it's really great that bro shutrerbox shared where he did it and at how much then. 

It will be most wonderful if you can pick up the phone and ask the WS how much it will cost to do now, 6 months since. 

And it will be doubly and triplely wonderful if you can, in turn contribute the latest information on the cost now so other shy bros reading this can update too. 

That is what a good forum is about. 2 ways traffic so that there's plenty of life left to Yada-ing instead of just 1 way to eternal silence. 

😂😂😂😂No offence ya. 

Yada-ing as usual. TGIF. Have a safe weekend. Take care. 

Cheers 

 

[Tohto]

On 3/4/2022 at 7:09 PM, thefalcon said:

@milynoti replaced wheel bearing at BMS in June 2020. Rear left only S$214 all in. 

Why not changed a pair?

Left spoil, right will follow soon.

Just changed both my rear wheel bearing early Feb for $380 at different workshop.

Edited March 5, 2022 by Tohto

[shutterbox]

18 hours ago, PSP415 said:

I think it's really great that bro shutrerbox shared where he did it and at how much then. 

It will be most wonderful if you can pick up the phone and ask the WS how much it will cost to do now, 6 months since. 

And it will be doubly and triplely wonderful if you can, in turn contribute the latest information on the cost now so other shy bros reading this can update too. 

That is what a good forum is about. 2 ways traffic so that there's plenty of life left to Yada-ing instead of just 1 way to eternal silence. 

😂😂😂😂No offence ya. 

Yada-ing as usual. TGIF. Have a safe weekend. Take care. 

Cheers 

 

you are right 😅

I try to contribute, where i can.

recently kena poison to tune forester, so couple of things came to mind

- tuning engine perf itself

- cooling

- suspension upgrades

- BBK+suitable rims.

need to prioritse what I desire most, within a set budget

 

lately also acquired another COE car (Allion A15), so quite a fair bit tinkering to get this running well, kind of losing focus 😋

 

[thefalcon]

@Tohto 

59 minutes ago, Tohto said:

Why not changed a pair?

Left spoil, right will follow soon.

Just changed both my rear wheel bearing early Feb for $380 at different workshop.

Right rear was replaced by MI (under Warranty during 50K servicing) in Sep 2019. MI so bad never replace both for me. 
Left rear was replaced by BMS in Jun 2020.

Is it ok to share your workshop?

[Mkl22]

2 minutes ago, thefalcon said:

@Tohto 

Right rear was replaced by MI (under Warranty during 50K servicing) in Sep 2019. MI so bad never replace both for me. 
Left rear was replaced by BMS in Jun 2020.

Is it ok to share your workshop?

Claim warranty can only do the one that is spoilt. No such thing as change together cause the other side will spoil soon. If like that all car manufacturers lose money liao

[Tohto]

11 minutes ago, thefalcon said:

@Tohto 

Right rear was replaced by MI (under Warranty during 50K servicing) in Sep 2019. MI so bad never replace both for me. 
Left rear was replaced by BMS in Jun 2020.

Is it ok to share your workshop?

Mine all service at Dynamic Mechanics after the 3 free servicing from MI.

Coming to 6 yrs next mth.

[richard_crl032]

@shutterbox 

Yes, 1k with parts and installation as well as 6 or 12 mths warranty by BKS that I cannot remember liao